Publications

• Evaluating the sustainability of Artificial Intelligence applications across the product lifecycle
  Proceeding
  

  Marongiu, Giovanni; Bruno, Giulia; Chiabert, Paolo; Lombardi, Franco
  IFIP ADVANCES IN INFORMATION AND COMMUNICATION TECHNOLOGY
  In: Titolo volume non avvalorato
  Springer (SVIZZERA)
  IFIP 21st International Conference on Product Lifecycle Management July 2024, Bangkok, Thailand (Bangkok (TH)) July 7-10, 2024
  ISSN:1868-4238

• Progressive Damage Analysis of Green Composite Laminates subjected to In-PlaneCrashworthiness
  Article
  

  Giammaria, Valentina; Del Bianco, Giulia; Fiumarella, Dario; Ciardiello, Raffaele; Vigna, Lorenzo; Boria, Simonetta; Scattina, Alessandro; Belingardi, Giovanni; Castorani, Vincenzo
  PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART C, JOURNAL OF MECHANICAL ENGINEERING SCIENCE
  SAGE
  pp.8 (pp.1-8) ISSN:2041-2983 DOI:10.1177/09544062241281418

• On the notch sensitivity of as‐built Laser Beam Powder Bed–Fused AlSi10Mg specimens subjected to Very High Cycle Fatigue tests at ultrasonic frequency up to 109 cycles
  Article
  

  Tridello, Andrea; Boursier Niutta, Carlo; Benelli, Alessandro; Pagnoncelli, Ana Paula; Rossetto, Massimo; Berto, Filippo; Paolino, Davide Salvatore
  FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
  WILEY
  pp.16 ISSN:8756-758X DOI:10.1111/ffe.14419

• Synergistic impact of corrosion pitting on the rotating bending fatigue of additively manufactured 316L stainless steel: Integrated experimental and modeling analyses
  Article
  

  Behvar, Alireza; Aghayar, Yahya; Avateffazeli, Maryam; Tridello, Andrea; Benelli, Alessandro; Paolino, Davide S.; Mohammadi, Mohsen; Haghshenas, Meysam
  INTERNATIONAL JOURNAL OF FATIGUE
  Elsevier
  Vol.188 pp.25 (pp.1-25) ISSN:0142-1123 DOI:10.1016/j.ijfatigue.2024.108491

• An Evaluation of Research Interests in Vertical Farming through the Analysis of KPIs Adopted in the Literature
  Article
  

  Fasciolo, Benedetta; Grasso, Nicolo; Awouda, Ahmed; Bruno, Giulia; Lombardi, Franco; Chiabert, Paolo
  SUSTAINABILITY
  Multidisciplinary Digital Publishing Institute (MDPI)
  pp.18 ISSN:2071-1050 DOI:10.3390/su16041371

• Development of a Human-Centric Knowledge Management Framework Through the Integration Between PLM and MES
  Proceeding
  

  Marongiu, Giovanni; Bruno, Giulia; Lombardi, Franco
  IFIP ADVANCES IN INFORMATION AND COMMUNICATION TECHNOLOGY
  In: Product Lifecycle Management. Leveraging Digital Twins, Circular Economy, and Knowledge Management for Sustainable Innovation
  Springer (SVIZZERA)
  20th IFIP WG 5.1 International Conference, PLM 2023, Montreal, QC, Canada, July 9–12, 2023 (Montreal (CA)) July 9–12, 2023
  Vol.702 pp.11 (pp.119-129) ISSN:1868-4238 ISBN:9783031625817 DOI:10.1007/978-3-031-62582-4_11

• A novel approach for damage assessment in adhesively bonded composite joints using backface strain technique
  Article
  

  Abbasi, M.; Ciardiello, R.; Goglio, L.
  COMPOSITES. PART B, ENGINEERING
  ELSEVIER
  Vol.286 pp.16 ISSN:1359-8368 DOI:10.1016/j.compositesb.2024.111766

• Backface strain as an index to detect damage initiation in composite single-lap bonded joints: Effects of adhesive type and joint dimensions
  Article
  

  Abbasi, Mohammad; Ciardiello, Raffaele; Goglio, Luca
  INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
  ELSEVIER
  Vol.134 pp.17 ISSN:0143-7496 DOI:10.1016/j.ijadhadh.2024.103791

• Active and Passive Filling Stir Repairing of AISI 304 Alloy
  Article
  

  Lunetto, Vincenzo; Basile, Dario; Razza, Valentino; RUSSO SPENA, Pasquale
  METALS
  MDPI
  Vol.14 pp.15 ISSN:2075-4701 DOI:10.3390/met14080911

• Microstructures and mechanical properties of friction stir welded additively manufactured Scalmalloy®
  Article
  

  Mirandola, Pietro; Novel, David; Perini, Matteo; Benedetti, Matteo; Lombardi, Franco; Lunetto, Vincenzo; Spena, Pasquale Russo
  INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY
  Springer
  pp.16 ISSN:0268-3768 DOI:10.1007/s00170-024-14237-9

• Atmospheric-pressure plasma jet texturing of C/C composites for improved joint strength
  Article
  

  De Zanet, Alessandro; Valenza, Fabrizio; Casalegno, Valentina; Gambaro, Sofia; D'Isanto, Fabiana; Salvo, Milena
  CERAMICS INTERNATIONAL
  Elsevier
  Vol.50 pp.10 (pp.38933-38942) ISSN:0272-8842 DOI:10.1016/j.ceramint.2024.07.257

• Review on machine learning techniques for the assessment of the fatigue response of additively manufactured metal parts
  Article
  

  Centola, Alessio; Tridello, Andrea; Ciampaglia, Alberto; Berto, Filippo; Paolino, Davide Salvatore
  FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
  WILEY
  Vol.47 pp.30 (pp.2700-2729) ISSN:8756-758X DOI:10.1111/ffe.14326

• Effects of anisotropy and infill pattern on compression properties of 3D printed CFRP: mechanical analysis and elasto-plastic finite element modelling
  Article
  

  Bandinelli, Francesco; Scapin, Martina; Peroni, Lorenzo
  RAPID PROTOTYPING JOURNAL
  Emerald Publishing
  Vol.30 pp.17 (pp.142-158) ISSN:1355-2546 DOI:10.1108/RPJ-11-2023-0385

• An efficient shape-based procedure for strain hardening identification in the post-necking phase
  Article
  

  Beltramo, Marta; Scapin, Martina; Peroni, Lorenzo
  MECHANICS OF MATERIALS
  Elsevier
  Vol.196 pp.13 ISSN:0167-6636 DOI:10.1016/j.mechmat.2024.105066

• A Statistical Mesoscale Approach to Model the Size Effect on the Tensile Strength of Notched Woven Composites
  Article
  

  Ferrarese, Andrea; BOURSIER NIUTTA, Carlo; Ciampaglia, Alberto; Paolino, Davide S.
  APPLIED SCIENCES
  MDPI
  Vol.14 pp.11 ISSN:2076-3417 DOI:10.3390/app14083467

• Design of a Lightweight Origami Composite Crash Box: Experimental and Numerical Study on the Absorbed Energy in Frontal Impacts
  Article
  

  Ciampaglia, Alberto; Patruno, Luca; Ciardiello, Raffaele
  JOURNAL OF COMPOSITES SCIENCE
  MDPI
  Vol.8 ISSN:2504-477X DOI:10.3390/jcs8060224

• Absorbing capabilities of additively manufactured lattice structure specimens for crash applications: Damage tolerant design and simulations
  Article
  

  Tridello, Andrea; Boursier Niutta, Carlo; Benelli, Alessandro; Paolino, Davide Salvatore
  FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
  Wiley
  pp.22 (pp.1-22) ISSN:8756-758X DOI:10.1111/ffe.14320

• Delamination Assessment in Composite Laminates through Local Impulse Excitation Technique (IET)
  Article
  

  Boursier Niutta, Carlo; Padula, Pierpaolo; Tridello, Andrea; Boccaccio, Marco; Acerra, Francesco; Paolino, Davide S.
  APPLIED SCIENCES
  MDPI
  Vol.14 pp.20 ISSN:2076-3417 DOI:10.3390/app14073023

• Very high cycle fatigue of laser powder bed fused Al-Cu-Mg-Ag-TiB2 (A20X) Alloy: Stress relief and aging treatments
  Article
  

  Avateffazeli, Maryam; Shakil, Shawkat I.; Behvar, Alireza; Attallah, Moataz M.; Simsiriwong, Jutima; Tridello, Andrea; Paolino, Davide S.; Haghshenas, Meysam
  INTERNATIONAL JOURNAL OF FATIGUE
  ELSEVIER SCI LTD
  Vol.183 pp.18 ISSN:0142-1123 DOI:10.1016/j.ijfatigue.2024.108281

• Very high cycle fatigue of additive manufacturing metals
  Book chapter
  

  Caivano, Riccardo; Tridello, Andrea; Paolino, Davide Salvatore; Berto, Filippo
  Fatigue in Additive Manufactured Metals
  Elsevier
  pp.30 (pp.151-180) ISBN:9780323912044 DOI:10.1016/b978-0-323-91204-4.00007-1

• A new effective phenomenological constitutive model for semi‐crystalline and amorphous polymers
  Article
  

  Iadarola, Andrea; Ciardiello, Raffaele; Paolino, DAVIDE SALVATORE
  POLYMER ENGINEERING AND SCIENCE
  Wiley
  pp.21 (pp.1-21) ISSN:1548-2634 DOI:10.1002/pen.26808

• Effectiveness of Sodium Silicate on the Corrosion Protection of AA7075-T6 Aluminium Alloy in Sodium Chloride Solution
  Article
  

  Rosalbino, Francesco; Scavino, Giorgio; Ubertalli, Graziano
  MATERIALS SCIENCES AND APPLICATIONS
  Scientific Research Publishing
  Vol.15 pp.13 (pp.53-65) ISSN:2153-117X DOI:10.4236/msa.2024.154005

• Ultrasonic tensile test and micro-CT defect analysis on alumina 99.5%
  Article
  

  Pagnoncelli, A. P.; Tridello, Andrea; Paolino, Davide S.; Peroni, L.
  MATERIALS & DESIGN
  ELSEVIER SCI LTD
  Vol.238 pp.19 ISSN:0264-1275 DOI:10.1016/j.matdes.2024.112680

• Innovative tensile test for brittle materials: Validation on graphite R4550
  Article
  

  Pagnoncelli, A. P.; Paolino, D. S.; Peroni, L.; Tridello, A.
  INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
  PERGAMON-ELSEVIER SCIENCE LTD
  Vol.261 pp.12 ISSN:0020-7403 DOI:10.1016/j.ijmecsci.2023.108679

• Glass-based sealants for joining α to β’’-Al2O3 in Na–Zn batteries
  Article
  

  D'Isanto, F.; Baggio, A.; Salvo, M.; Basso, D.; Gaia, D.; Smeacetto, F.
  CERAMICS INTERNATIONAL
  Elsevier
  Vol.50 pp.8 (pp.14542-14549) ISSN:0272-8842 DOI:10.1016/j.ceramint.2024.01.367

• Hybrid knowledge based system supporting Digital Twins in the Industry 5.0
  Proceeding
  

  Traini, Emiliano; Antal, Gabriel; Bruno, Giulia; De Maddis, Manuela; Lombardi, Franco; Panza, Luigi; Russo Spena, Pasquale
  PROCEDIA COMPUTER SCIENCE
  In: Procedia Computer Science
  Elsevier
  5th International Conference on Industry 4.0 and Smart Manufacturing
  Vol.232 pp.10 (pp.1471-1480) ISSN:1877-0509 DOI:10.1016/j.procs.2024.01.145

• Machine learning tool for the prediction of electrode wear effect on the quality of resistance spot welds
  Article
  

  Panza, Luigi; Bruno, Giulia; Antal, Gabriel; DE MADDIS, Manuela; RUSSO SPENA, Pasquale
  IJIDEM
  Springer
  pp.18 ISSN:1955-2505 DOI:10.1007/s12008-023-01733-7

• Static and Impact Properties of Flax-Reinforced Polymers Prepared with Conventional Epoxy and Sustainable Resins
  Article
  

  Ciardiello, Raffaele; Benelli, Alessandro; Paolino, DAVIDE SALVATORE
  POLYMERS
  MDPI
  Vol.16 pp.21 (pp.1-21) ISSN:2073-4360 DOI:10.3390/polym16020190

• A yttrium aluminosilicate glass-ceramic to join SiC/SiC composites
  Article
  

  Malinverni, Carla; Salvo, Milena; Ziętara, Maciej; Cempura, Grzegorz; Kruk, Adam; Maier, Jonathan; Prentice, Calvin; Farnham, Michael; Casalegno, Valentina
  JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
  Elsevier
  Vol.44 pp.9 (pp.3579-3587) ISSN:0955-2219 DOI:10.1016/j.jeurceramsoc.2023.12.095

• Antibacterial and Antiviral Activities of Silver Nanocluster/Silica Composite Coatings Deposited onto Air Filters
  Article
  

  Luceri, Angelica; Francese, Rachele; Perero, Sergio; Lembo, David; Ferraris, Monica; Balagna, Cristina
  ACS APPLIED MATERIALS & INTERFACES
  American Chemical Society
  Vol.16 pp.11 (pp.3955-3965) ISSN:1944-8244 DOI:10.1021/acsami.3c13843

• Fast-quenched Na2Si2O5 stability and properties in crystalline composite
  Article
  

  Smeacetto, F.; Saffirio, S.; Salvo, M.; Palliotto, A.; Zhang, J.; De Angelis, S.; Tinti, V. B.; Esposito, V.
  MATERIALIA
  Elsevier
  Vol.33 pp.9 ISSN:2589-1529 DOI:10.1016/j.mtla.2023.101968

• Experimental investigation of 3D printed infill structures for crash absorbing applications
  Article
  

  Bandinelli, F.; Peroni, L.; Scapin, M.
  MATERIALS LETTERS
  ELSEVIER
  Vol.354 pp.4 ISSN:0167-577X DOI:10.1016/j.matlet.2023.135373

• Assembling Uncertainty Effects on the Dynamic Response of Nominally Identical Motorbike Components
  Proceeding
  

  Bonisoli, Elvio; Dimauro, Luca; Venturini, Simone; Peroni, Lorenzo
  CONFERENCE PROCEEDINGS OF THE SOCIETY FOR EXPERIMENTAL MECHANICS SERIES
  In: Model Validation and Uncertainty Quantification
  Springer (STATI UNITI D'AMERICA)
  Proceedings of the 41st IMAC, A Conference and Exposition on Structural Dynamics 2023 (Austin (TX, USA)) 13-16 February 2023
  Vol.3 pp.10 (pp.201-210) ISSN:2191-5644 ISBN:9783031370021 DOI:10.1007/978-3-031-37003-8_32

• Dynamic behavior of porous graphite under laser-induced shocks
  Article
  

  Morena, Alberto; Peroni, Lorenzo; Scapin, Martina
  MATERIALS LETTERS
  Elsevier
  Vol.355 pp.4 ISSN:0167-577X DOI:10.1016/j.matlet.2023.135499

• Physics based data driven method for the crashworthiness design of origami composite tubes
  Article
  

  Ciampaglia, Alberto; Fiumarella, Dario; BOURSIER NIUTTA, Carlo; Ciardiello, Raffaele; Belingardi, Giovanni
  INTERNATIONAL JOURNAL OF MECHANICS AND MATERIALS IN DESIGN
  Springer
  Vol.20 pp.18 (pp.445-462) ISSN:1569-1713 DOI:10.1007/s10999-023-09685-2

• Effects of singular and non‐singular stress fields on very high cycle fatigue life of adhesive joints
  Article
  

  Pederbelli, Davide; Tridello, Andrea; Paolino, DAVIDE SALVATORE; Goglio, Luca
  FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
  John Wiley & Sons, Inc.
  pp.16 ISSN:8756-758X DOI:10.1111/ffe.14171

• Effect of bonding area geometry on the behavior of composite single lap joints (SLJ) and estimation of adhesive properties using finite element method
  Article
  

  Abbasi, M.; Ciardiello, R.; Goglio, L.
  JOURNAL OF ADHESION
  Taylor & Francis
  Vol.100 pp.23 (pp.1-23) ISSN:0021-8464 DOI:10.1080/00218464.2023.2252338

• Wire arc additive manufactured AWS ER100S-G steel: Very high cycle fatigue characterization
  Article
  

  Webster, Garrett A.; Behvar, Alireza; Shakil, Shawkat I.; Ribble, Riyanka; Chou, Kathleen; Krishnamurthy, Ajay; Zekriardehani, Shahab; Lawrence, Joseph; Shakerin, Sajad; Mohammadi, Mohsen; Tridello, Andrea; Paolino, Davide S.; Haghshenas, Meysam
  ENGINEERING FAILURE ANALYSIS
  PERGAMON-ELSEVIER SCIENCE LTD
  Vol.154 pp.21 ISSN:1350-6307 DOI:10.1016/j.engfailanal.2023.107721

• Additively manufactured lattice structures: An innovative defect-based design methodology against crash impact
  Article
  

  Boursier Niutta, C.; Paolino, D. S.; Tridello, A.
  ENGINEERING FAILURE ANALYSIS
  Elsevier
  Vol.152 pp.12 ISSN:1350-6307 DOI:10.1016/j.engfailanal.2023.107436

• Uniaxial Fatigue Tests on Polyamide Reinforced with Short Glass Fibre
  Proceeding
  

  De Caro, Daniele; Plano, Stefano; Gabellone, Davide; Tedesco, Michele M.; Niutta, Carlo Boursier; Tridello, Andrea; Belingardi, Giovanni; Paolino, Davide S.
  LECTURE NOTES IN MECHANICAL ENGINEERING
  In: Dynamic Response and Failure of Composite Materials
  Springer
  International Symposium on Dynamic Response and Failure of Composite Materials, DRAF 2022 (Ischia (Ita)) 21 June 2022 through 24 June 2022
  pp.10 (pp.3-12) ISSN:2195-4356 ISBN:9783031285462 DOI:10.1007/978-3-031-28547-9_1

• Fatigue behavior in the presence of defects
  Book chapter
  

  Tridello, Andrea; Boursier Niutta, Carlo; Berto, Filippo; du Plessis, Anton; Paolino, Davide Salvatore
  Fatigue in Additive Manufactured Metals
  Elsevier
  pp.38 (pp.93-130) ISBN:9780323912044 DOI:10.1016/b978-0-323-91204-4.00009-5

• Machine learning methods to predict the fatigue life of selectively laser melted Ti6Al4V components
  Article
  

  Centola, Alessio; Ciampaglia, Alberto; Tridello, Andrea; Paolino, Davide Salvatore
  FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
  WILEY
  Vol.46 pp.21 (pp.4350-4370) ISSN:8756-758X DOI:10.1111/ffe.14125

• Development of photocatalytic nanostructured TiO2 and NiO/TiO2 coatings by DC magnetron sputtering for photocatalytic applications
  Article
  

  Villamayor, Antía; Pomone, Thomas; Perero, Sergio; Ferraris, Monica; Laura Barrio, Victoria; G-Berasategui, Eva; Kelly, Peter
  CERAMICS INTERNATIONAL
  ELSEVIER SCI LTD
  Vol.49 pp.9 (pp.19309-19317) ISSN:0272-8842 DOI:10.1016/j.ceramint.2023.03.058

• Strain Measurement with Optic Fibers for Structural Health Monitoring of Woven Composites: Comparison with Strain Gauges and Digital Image Correlation Measurements
  Article
  

  Boursier Niutta, C.; Tridello, A.; Ciardiello, R.; Paolino, D. S.
  SENSORS
  Multidisciplinary Digital Publishing Institute (MDPI)
  Vol.23 pp.17 ISSN:1424-8220 DOI:10.3390/s23249794

• Effect of Loading Frequency on the Fatigue Response of Adhesive Joints up to the VHCF Range
  Article
  

  Pederbelli, D; Goglio, L; Paolino, D; Rossetto, M; Tridello, A
  APPLIED SCIENCES
  MDPI
  Vol.13 pp.21 ISSN:2076-3417 DOI:10.3390/app132312967

• Experimental scatter of the fatigue response of additively manufactured components: a statistical method based on the Profile Likelihood
  Article
  

  Tridello, A; Boursier Niutta, C; Rossetto, M; Berto, F; Paolino, D S
  SCIENTIFIC REPORTS
  NATURE PORTFOLIO
  Vol.13 pp.16 ISSN:2045-2322 DOI:10.1038/s41598-023-40249-8

• Statistical estimation of fatigue design curves from datasets involving failures from defects
  Article
  

  Tridello, A; Boursier Niutta, C; Rossetto, M; Berto, F; Paolino, Ds
  INTERNATIONAL JOURNAL OF FATIGUE
  ELSEVIER SCI LTD
  Vol.176 pp.12 ISSN:0142-1123 DOI:10.1016/j.ijfatigue.2023.107882

• Pre-hole friction stir spot welding of dual-phase steels and comparison with resistance spot welding, conventional and pinless friction stir spot welding
  Article
  

  Lunetto, Vincenzo; De Maddis, Manuela; Russo Spena, Pasquale
  INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY
  Springer
  pp.17 ISSN:0268-3768 DOI:10.1007/s00170-023-12400-2

• Impact Response of Carbon Fiber Composites: Comparison Between Epoxy and Bio-Based Epoxy Matrices
  Proceeding
  

  Ciardiello, R.; Boursier Niutta, C.; Tridello, A.; Paolino, D. S.
  In: Dynamic Response and Failure of Composite Materials
  Springer (ITALIA)
  DRAF 2022
  pp.11 (pp.271-281) ISBN:9783031285462 DOI:10.1007/978-3-031-28547-9_31

• Material parameter optimization of flax/epoxy composite laminates under low-velocity impact
  Article
  

  Giammaria, V.; Del Bianco, G.; Raponi, E.; Fiumarella, D.; Ciardiello, R.; Boria, S.; Duddeck, F.; Belingardi, G.
  COMPOSITE STRUCTURES
  Elsevier Ltd
  Vol.321 pp.13 ISSN:0263-8223 DOI:10.1016/j.compstruct.2023.117303

• Enhancement of the Mechanical Performance of Glass-Fibre-Reinforced Composites through the Infusion Process of a Thermoplastic Recyclable Resin
  Article
  

  Ciardiello, Raffaele; Fiumarella, Dario; Belingardi, Giovanni
  POLYMERS
  MDPI
  Vol.15 pp.17 ISSN:2073-4360 DOI:10.3390/polym15153160

• A smart vertical farming system to evaluate productivity, quality, and sustainability of agricultural production
  Proceeding
  

  Grasso, Nicolò; Fasciolo, Benedetta; Bruno, Giulia; Lombardi, Franco
  LECTURE NOTES IN MECHANICAL ENGINEERING
  In: Flexible Automation and Intelligent Manufacturing: Establishing Bridges for More Sustainable Manufacturing Systems
  Springer
  FAIM2023 (Oporto) 18-22 giugno 2023
  Vol.2 pp.8 (pp.938-945) ISSN:2195-4364 ISBN:9783031381645 DOI:10.1007/978-3-031-38165-2_108

• Integrating Absolute Sustainability and Social Sustainability in the Digital Product Passport to Promote Industry 5.0
  Article
  

  Panza, L.; Bruno, G.; Lombardi, F.
  SUSTAINABILITY
  Multidisciplinary Digital Publishing Institute (MDPI)
  Vol.15 pp.20 ISSN:2071-1050 DOI:10.3390/su151612552

• Washing resistant antibacterial composite coatings on cotton textiles
  Article
  

  Luceri, Angelica; Perero, Sergio; Cochis, Andrea; Scalia, Alessandro C.; Rimondini, Lia; Ferraris, Monica; Balagna, Cristina
  CELLULOSE
  Springer
  Vol.30 pp.21 (pp.9877-9897) ISSN:0969-0239 DOI:10.1007/s10570-023-05471-7

• An overview of oxidation in hybrid and glass-based protective coatings for thermoelectric materials for medium-temperature range applications
  Article
  

  D'Isanto, F.; Smeacetto, F.; Reece, M. J.; Salvo, M.
  ADVANCES IN APPLIED CERAMICS
  Taylor&Francis
  pp.11 (pp.1-11) ISSN:1743-6753 DOI:10.1080/17436753.2023.2246000

• A smart aeroponic system for sustainable indoor farming
  Proceeding
  

  Fasciolo, B.; Awouda, A.; Bruno, G.; Lombardi, F.
  PROCEDIA CIRP
  In: Procedia CIRP
  Elsevier B.V.
  30th CIRP Life Cycle Engineering Conference
  Vol.116 pp.6 (pp.636-641) ISSN:2212-8271 DOI:10.1016/j.procir.2023.02.107

• Atmospheric pressure plasma jet for surface texturing of C/SiC
  Article
  

  De Zanet, Alessandro; Valenza, Fabrizio; Casalegno, Valentina; Gambaro, Sofia; Salvo, Milena
  CERAMICS INTERNATIONAL
  Elsevier
  Vol.49 pp.8 (pp.32136-32143) ISSN:0272-8842 DOI:10.1016/j.ceramint.2023.07.182

• Joining graphite with ZrHfNbTa and TiZrHfTa high entropy alloy interlayers by spark plasma sintering
  Article
  

  Wang, Xincheng; Saunders, Theo G.; Salvo, Milena; Wang, Yichen; Xiao, Xuan; Fu, Li; Reece, Michael J.
  JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
  Elsevier
  Vol.320 pp.10 ISSN:0924-0136 DOI:10.1016/j.jmatprotec.2023.118102

• Experimental Study on the Effect of Bonding Area Dimensions on the Mechanical Behavior of Composite Single-Lap Joint with Epoxy and Polyurethane Adhesives
  Article
  

  Abbasi, Mohammad; Ciardiello, Raffaele; Goglio, Luca
  APPLIED SCIENCES
  MDPI
  Vol.13 pp.17 ISSN:2076-3417 DOI:10.3390/app13137683

• Quasi-static and dynamic response of cardanol bio-based epoxy resins: effect of different bio-contents
  Proceeding
  

  Iadarola, Andrea; Matteo, Pietro Di; Ciardiello, Raffaele; Gazza, Francesco; Lambertini, Vito Guido; Brunella, Valentina; Paolino, Davide Salvatore
  PROCEDIA STRUCTURAL INTEGRITY
  In: Procedia Structural Integrity 47
  Elsevier
  27th International Conference on Fracture and Structural Integrity (IGF27) (Roma) February 21-24, 2023
  Vol.47 pp.15 (pp.383-397) ISSN:2452-3216 DOI:10.1016/j.prostr.2023.07.086

• Data-driven method to assess the influence of process parameters on the fatigue response of additively manufactured Ti6Al4V
  Proceeding
  

  Ciampaglia, Alberto; Tridello, Andrea; Berto, Filippo; Paolino, Davide
  In: 27th International Conference on Fracture and Structural Integrity (IGF27)
  Elsevier
  27th International Conference on Fracture and Structural Integrity (IGF27) (Roma) February 22-24, 2023
  Vol.47 pp.14 (pp.56-69) DOI:10.1016/j.prostr.2023.06.041

• LCF-HCF strain–life model: Statistical distribution and design curves based on the maximum likelihood principle
  Article
  

  Tridello, A.; Paolino, D. S.
  FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
  John Wiley and Sons Inc
  Vol.46 pp.12 (pp.2168-2179) ISSN:8756-758X DOI:10.1111/ffe.13990

• Blunt notch effect on the fatigue response up to 109 cycles of selective laser melting Ti6Al4V specimens
  Article
  

  Tridello, A.; Boursier Niutta, C.; Berto, F.; Paolino, D. S.
  FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
  John Wiley and Sons Inc
  pp.12 (pp.3417-3428) ISSN:8756-758X DOI:10.1111/ffe.14078

• Fatigue design of Additive Manufacturing components through Topology Optimization: Comparison of methodologies based on the defect distribution and on the stress gradient
  Article
  

  BOURSIER NIUTTA, Carlo; Tridello, Andrea; Paolino, Davide S.
  FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
  WILEY
  pp.17 (pp.1-17) ISSN:1460-2695 DOI:10.1111/ffe.14082

• Flax and hemp composites: Mechanical characterization and numerical modeling
  Article
  

  Del Bianco, Giulia; Giammaria, Valentina; Boria, Simonetta; Fiumarella, Dario; Ciardiello, Raffaele; Scattina, Alessandro; Belingardi, Giovanni; Castorani, Vincenzo
  PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART C, JOURNAL OF MECHANICAL ENGINEERING SCIENCE
  SAGE
  pp.13 ISSN:0954-4062 DOI:10.1177/09544062231182036

• Processing, Characterization, and Oxidation Resistance of Glass-Ceramic Coating on CoSb3
  Article
  

  Zawadzka, Kinga M.; D’Isanto, Fabiana; Mars, Krzysztof; Smeacetto, Federico; Salvo, Milena
  CRYSTALS
  MDPI
  Vol.13 pp.16 ISSN:2073-4352 DOI:10.3390/cryst13060880

• Nanostructured multilayer CAE-PVD coatings based on transition metal nitrides on Ti6Al4V alloy for biomedical applications
  Article
  

  Noori, M.; Atapour, M.; Ashrafizadeh, F.; Elmkhah, H.; di Confiengo, G. G.; Ferraris, S.; Perero, S.; Cardu, M.; Spriano, S.
  CERAMICS INTERNATIONAL
  Elsevier
  Vol.49 pp.16 (pp.23367-23382) ISSN:0272-8842 DOI:10.1016/j.ceramint.2023.04.169

• Assessment of the Critical Defect in Additive Manufacturing Components through Machine Learning Algorithms
  Article
  

  Tridello, Andrea; Ciampaglia, Alberto; Berto, Filippo; Paolino, DAVIDE SALVATORE
  APPLIED SCIENCES
  MDPI
  Vol.13 ISSN:2076-3417 DOI:10.3390/app13074294

• Size-Effects on the VHCF Response of Flat Metallic Specimens for Automotive Applications: Analysis of Fatigue Data with a Method Based on the Stress Gradient
  Article
  

  Tridello, A.; Boursier Niutta, C.; Berto, F.; Paolino, D. S.
  MATERIALS PERFORMANCE AND CHARACTERIZATION
  AMER SOC TESTING MATERIALS
  Vol.12 pp.15 ISSN:2165-3992 DOI:10.1520/MPC20220086

• Adhesive Thickness and Ageing Effects on the Mechanical Behaviour of Similar and Dissimilar Single Lap Joints Used in the Automotive Industry
  Article
  

  Ciardiello, R.; Boursier Niutta, C.; Goglio, L.
  PROCESSES
  MDPI
  Vol.11 pp.16 ISSN:2227-9717 DOI:10.3390/pr11020433

• Epoxy and Bio-Based Epoxy Carbon Fiber Twill Composites: Comparison of the Quasi-Static Properties
  Article
  

  Boursier Niutta, C.; Ciardiello, R.; Tridello, A.; Paolino, D. S.
  MATERIALS
  MDPI
  Vol.16 pp.19 ISSN:1996-1944 DOI:10.3390/ma16041601

• Experimental and Numerical Investigation of the Mesoscale Size Effect in Notched Woven Composites
  Article
  

  Ferrarese, Andrea; BOURSIER NIUTTA, Carlo; Ciampaglia, Alberto; Ciardiello, Raffaele; Paolino, Davide S.; Belingardi, Giovanni
  APPLIED SCIENCES
  MDPI
  Vol.13 pp.14 ISSN:2076-3417 DOI:10.3390/app13074300

• Strength and microstructure of friction stir welded additively manufactured Scalmalloy® in as-welded and heat-treated conditions
  Article
  

  Mirandola, Pietro; Lunetto, Vincenzo; Novel, David; Barozzi, Mario; Bellutti, Pierluigi; De Maddis, Manuela; Russo Spena, Pasquale
  JOURNAL OF MANUFACTURING PROCESSES
  Elsevier Ltd
  Vol.97 pp.11 (pp.1-11) ISSN:1526-6125 DOI:10.1016/j.jmapro.2023.04.051

• An advanced post-necking analysis methodology for elasto-plastic material models identification
  Article
  

  Beltramo, Marta; Scapin, Martina; Peroni, Lorenzo
  MATERIALS & DESIGN
  Elsevier
  Vol.230 pp.15 ISSN:0264-1275 DOI:10.1016/j.matdes.2023.111937

• W/Fe co-sputtered layers for tungsten to steel joints
  Article
  

  Casalegno, V.; Perero, S.; Girman, V.; Sedlak, R.; Scarpellini, A.; Dorow-Gerspach, D.; Heuer, S.; Ferraris, M.
  NUCLEAR MATERIALS AND ENERGY
  Elsevier
  Vol.35 pp.11 (pp.1-11) ISSN:2352-1791 DOI:10.1016/j.nme.2023.101421

• Similar and dissimilar lap friction stir welding of titanium alloys: on the elimination of the hook defect
  Article
  

  Lunetto, Vincenzo; DE MADDIS, Manuela; RUSSO SPENA, Pasquale
  INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY
  Springer
  pp.19 ISSN:0268-3768 DOI:10.1007/s00170-023-11316-1

• The joining of alumina to Hastelloy by a TiZrCuNi filler metal: 2 wettability and interfacial reactivity
  Article
  

  Baggio, Andrea; D'Isanto, Fabiana; Valenza, Fabrizio; Gambaro, Sofia; Casalegno, Valentina; Salvo, Milena; Smeacetto, Federico
  MATERIALS
  MDPI
  Vol.16 pp.13 ISSN:1996-1944 DOI:10.3390/ma16051976

• Glass-ceramics for joining oxide-based ceramic matrix composites (Al2O3/Al2O3-ZrO2) operating under direct flame exposure
  Article
  

  Malinverni, Carla; Salvo, Milena; De Zanet, Alessandro; D’Isanto, Fabiana; Smeacetto, Federico; Bertrand, Pierre; Puchas, Georg; Schafföner, Stefan; Casalegno, Valentina
  JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
  Elsevier
  Vol.43 pp.9 (pp.3621-3629) ISSN:0955-2219 DOI:10.1016/j.jeurceramsoc.2023.02.019

• Experimental and numerical characterization of adhesive joints with composite substrates by means of the Arcan test
  Article
  

  Benelli, A.; Ciardiello, R.; Boursier Niutta, C.; Goglio, L.
  INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
  Elsevier
  Vol.122 pp.11 ISSN:0143-7496 DOI:10.1016/j.ijadhadh.2022.103321

• Adhesive Thickness and Ageing Effects on the Mechanical Behaviour of Similar and Dissimilar Single Lap Joints Used in the Automotive Industry
  Article
  

  Ciardiello, Raffaele; BOURSIER NIUTTA, Carlo; Goglio, Luca
  PROCESSES
  MDPI
  Vol.11 pp.16 ISSN:2227-9717 DOI:10.3390/pr11020433

• Selective distributed optical fiber sensing system based on silicone cladding optical fiber and Rayleigh backscattering reflectometry for the detection of hydrocarbon leakages
  Article
  

  Baggio, Andrea; Turani, Matteo; Olivero, Massimo; Salvo, Milena; Pugliese, Diego; Sangermano, Marco
  OPTICS AND LASER TECHNOLOGY
  Elsevier
  Vol.161 pp.9 ISSN:0030-3992 DOI:10.1016/j.optlastec.2023.109158

• Data driven method for predicting the effect of process parameters on the fatigue response of additive manufactured AlSi10Mg parts
  Article
  

  Ciampaglia, A; Tridello, A.; Paolino, D. S.; Berto, F.
  INTERNATIONAL JOURNAL OF FATIGUE
  Elsevier
  Vol.170 pp.13 ISSN:0142-1123 DOI:10.1016/j.ijfatigue.2023.107500

• Elasto-Plastic Mechanical Modeling of Fused Deposition 3D Printing Materials
  Article
  

  Bandinelli, Francesco; Peroni, Lorenzo; Morena, Alberto
  POLYMERS
  MDPI
  Vol.15 pp.19 ISSN:2073-4360 DOI:10.3390/polym15010234

• Plasma etching as a surface engineering technique for SiC/SiC composites to improve joint strength
  Article
  

  De Zanet, Alessandro; Pedroni, Matteo; Salvo, Milena; Vassallo, Espedito; Casalegno, Valentina
  CERAMICS INTERNATIONAL
  Elsevier
  Vol.49 pp.7 (pp.10608-10614) ISSN:0272-8842 DOI:10.1016/j.ceramint.2022.11.248

• Efficient experimental methods for rapid fatigue life estimation of additive manufactured elements
  Article
  

  Colombo, C.; Tridello, A.; Pagnoncelli, A. P.; Biffi, C. A.; Fiocchi, J.; Tuissi, A.; Vergani, L. M.; Paolino, D. S.
  INTERNATIONAL JOURNAL OF FATIGUE
  Elsevier
  Vol.167 pp.15 ISSN:0142-1123 DOI:10.1016/j.ijfatigue.2022.107345

• Multifunctional material design for strain sensing: Carbon black effect on mechanical and electrical properties of polyamides
  Article
  

  Ciampaglia, Alberto; Ciardiello, Raffaele; Cesano, Federico; Belingardi, Giovanni; Brunella, Valentina
  COMPOSITE STRUCTURES
  Elsevier
  Vol.304 pp.9 ISSN:0263-8223 DOI:10.1016/j.compstruct.2022.116373

• One-of-a-kind production (OKP) planning and control: a comprehensive review and future research directions
  Article
  

  Sordan, JULIANO ENDRIGO; Carlos Oprime, Pedro; Lopes Pimenta, Márcio; Chiabert, Paolo; Lombardi, Franco; Hilletofth, Per
  THE INTERNATIONAL JOURNAL OF PRODUCTIVITY AND PERFORMANCE MANAGEMENT
  EMERALD
  Vol.72 pp.21 (pp.2446-2466) ISSN:1741-0401 DOI:10.1108/IJPPM-09-2021-0557

• Glasses as energy materials for a sustainable development
  Proceeding
  

  Ferraris, M.; Salvo, M.; Baino, F.; Smeacetto, F.
  In: Book of Abstract - 14th Symposium on Green and Sustainable Technologies for Materials Manufacturing and Processing, MS&T22
  ACERS
  14th Symposium on Green and Sustainable Technologies for Materials Manufacturing and Processing, MS&T22 (Pittsburgh) 11-12 October 2022
  pp.1

• Industry 4.0: A Bibliometric Analysis in the Perspective of Operations Management
  Article
  

  Sordan, J. E.; Oprime, P.; Pimenta, M. L.; Chiabert, P.; Lombardi, F.
  OPERATIONS AND SUPPLY CHAIN MANAGEMENT
  Jurusan Teknik Industri, Institut Teknologi Sepuluh Nopember
  Vol.15 pp.12 (pp.93-104) ISSN:1979-3561 DOI:10.31387/oscm0480333

• Symbiotic relationship between robotics and Lean Manufacturing: a case study involving line balancing
  Article
  

  Sordan, JULIANO ENDRIGO; Carlos Oprime, Pedro; Lopes Pimenta, Marcio; Lombardi, Franco; Chiabert, Paolo
  THE TQM JOURNAL
  Emerald
  Vol.34 pp.20 (pp.1076-1095) ISSN:1754-2731 DOI:10.1108/TQM-03-2021-0073

• Duplex LCF-VHCF P-S-N design curves: a methodology based on the Maximum Likelihood Principle
  Proceeding
  

  Tridello, A.; Boursier Niutta, C.; Berto, F.; Rossetto, M.; Paolino, D. S.
  PROCEDIA STRUCTURAL INTEGRITY
  In: 23 European Conference on Fracture
  Elsevier
  ECF23, European Conference on Fracture 2022 (Funchal, Madeira, Portugal) une 27 – July 1, 2022
  Vol.42 pp.8 (pp.1320-1327) ISSN:2452-3216 DOI:10.1016/j.prostr.2022.12.168

• On the influence of Additive Manufacturing defects on the energy absorption capability of a lattice structure
  Proceeding
  

  Boursier Niutta, C.; Ciardiello, R.; Berto, F.; Paolino, D. S.; Tridello, A.
  PROCEDIA STRUCTURAL INTEGRITY
  In: 23 European Conference on Fracture
  Elsevier
  ECF23, European Conference on Fracture 2022 (Funchal, Madeira (Portugal)) June 27 – July 1, 2022
  Vol.42 pp.9 (pp.1449-1457) ISSN:2452-3216 DOI:10.1016/j.prostr.2022.12.185

• Open product development to support circular economy through a material lifecycle management framework
  Article
  

  Panza, L.; Faveto, A.; Bruno, G.; Lombardi, F.
  INTERNATIONAL JOURNAL OF PRODUCT LIFECYCLE MANAGEMENT
  Inderscience Enterprises Ltd.
  Vol.14 pp.27 (pp.255-281) ISSN:1743-5129 DOI:10.1504/ijplm.2022.125826

• Comparison between Fractal and Statistical Approaches to Model Size Effects in VHCF
  Article
  

  Invernizzi, S; Paolino, D; Montagnoli, F; Tridello, A; Carpinteri, A
  METALS
  MDPI
  Vol.12 pp.18 ISSN:2075-4701 DOI:10.3390/met12091499

• Numerical Modeling of Shockwaves Driven by High-Energy Particle Beam Radiation in Tungsten-Made Structures
  Article
  

  Scapin, Martina; Peroni, Lorenzo
  METALS
  MDPI
  Vol.12 pp.21 ISSN:2075-4701 DOI:10.3390/met12040670

• Experimentally trained physic-informed neural network as material model
  Proceeding
  

  Ciampaglia, A; Ferrarese, A; Paolino, D. S.; Belingardi, G; Liu, W. K.
  In: Modeling and Prediction
  EPFL Lausanne, Composite Construction Laboratory
  20th European Conference on Composite Materials - Composites Meet Sustainability (Lausanne (Switzerland))
  Vol.4 pp.9 (pp.822-830) ISBN:9782970161400 DOI:10.5075/epfl-298799_978-2-9701614-0-0

• Fatigue resistance of low pressure nitrided Cr-Mo low alloy steels
  Article
  

  Firrao, D.; Ubertalli, G.; Morgano, E.; Brunelli, A.
  LA METALLURGIA ITALIANA
  AIM
  pp.8 (pp.12-19) ISSN:0026-0843

• Investigation of Mechanical Properties of Aluminum Tailor Welded Blanks
  Proceeding
  

  Basile, Dario; DE MADDIS, Manuela; Sesana, Raffaella; RUSSO SPENA, Pasquale; Maiorano, Roberto
  In: ICWE 2022:16
  International scholarly and scientific research & innovation
  International Conference on Welding Engineering (Tokyo, Online) July 21-22, 2022
  pp.1

• Highly-filled flowable composite in deep margin elevation: FEA study obtained from a microCT real model
  Article
  

  Baldi, Andrea; Scattina, Alessandro; Ferrero, Giorgio; Comba, Allegra; Alovisi, Mario; Pasqualini, Damiano; Peroni, Lorenzo; Muggeo, Matteo; Germanetti, Filippo; Scotti, Nicola
  DENTAL MATERIALS
  Elsevier
  Vol.38 pp.14 (pp.94-107) ISSN:0109-5641 DOI:10.1016/j.dental.2021.10.005

• Size-effects affecting the fatigue response up to 109 cycles (VHCF) of SLM AlSi10Mg specimens produced in horizontal and vertical directions
  Article
  

  Tridello, A.; Fiocchi, J.; Biffi, C. A.; Rossetto, M.; Tuissi, A.; Paolino, D. S.
  INTERNATIONAL JOURNAL OF FATIGUE
  ELSEVIER SCI LTD
  Vol.160 pp.11 ISSN:0142-1123 DOI:10.1016/j.ijfatigue.2022.106825

• Defect-Driven topology optimization for fatigue design of additive manufacturing structures: Application on a real industrial aerospace component
  Article
  

  Boursier Niutta, C.; Tridello, A.; Barletta, G.; Gallo, N.; Baroni, A.; Berto, F.; Paolino, D. S.
  ENGINEERING FAILURE ANALYSIS
  Elsevier
  Vol.142 pp.12 ISSN:1350-6307 DOI:10.1016/j.engfailanal.2022.106737

• Design against fatigue failures: Lower bound P-S-N curves estimation and influence of runout data
  Article
  

  Tridello, A.; Boursier Niutta, C.; Berto, F.; Tedesco, M. M.; Plano, S.; Gabellone, D.; Paolino, D. S.
  INTERNATIONAL JOURNAL OF FATIGUE
  Elsevier
  Vol.162 pp.14 ISSN:0142-1123 DOI:10.1016/j.ijfatigue.2022.106934

• Efficient management of industrial electric vehicles by means of static and dynamic wireless power transfer systems
  Article
  

  Faveto, Alberto; Panza, Luigi; Bruno, Giulia; Cirimele, Vincenzo; Stefano Furio, Saverio; Lombardi, Franco
  INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY
  Springer Nature
  pp.19 ISSN:0268-3768 DOI:10.1007/s00170-022-10216-0

• Investigation of Strength and Formability of 6016 Aluminum Tailor Welded Blanks
  Article
  

  Basile, Dario; Sesana, Raffaella; De Maddis, Manuela; Borella, Luca; Russo Spena, Pasquale
  METALS
  MDPI
  Vol.12 pp.11 (pp.1593-1603) ISSN:2075-4701 DOI:10.3390/met12101593

• Experimental characterization of 3D printed nylon-carbon at different strain-rates
  Proceeding
  

  Morena, Alberto; Peroni, Lorenzo; Scapin, Martina; Ciardiello, Raffaele; Tridello, Andrea
  In: Conference Proceedings "Dynamic Behaviour of Additively Manufactured Structures & Materials"
  DYMAT
  26th DYMAT Technical Meeting (Freiburg (Germany))
  

• Glass-ceramic joining of Fe22Cr porous alloy to Crofer22APU: interfacial issues and mechanical properties
  Article
  

  D'Isanto, Fabiana; Salvo, Milena; Molin, Sebastian; Koszelow, Damian; Javed, Hassan; Akram, Sufyan; Chrysanthou, Andreas; Smeacetto, Federico
  CERAMICS INTERNATIONAL
  Elsevier
  Vol.48 pp.9 (pp.28519-28527) ISSN:0272-8842 DOI:10.1016/j.ceramint.2022.06.166

• Torsional behaviour of glass-joined, laser-processed Crofer 22 APU interconnect: Unravelling the effect of surface roughness on the shear strength
  Article
  

  Smeacetto, F.; Zanchi, E.; Meena Narayana Menon, D.; Janner, D.; Lamnini, S.; Salvo, M.; De La Pierre, S.; Javed, H.; Ferraris, M.
  CERAMICS INTERNATIONAL
  Elsevier
  Vol.48 pp.7 (pp.32837-32843) ISSN:0272-8842 DOI:10.1016/j.ceramint.2022.07.210

• High strain-rate tests at high temperature in controlled atmosphere
  Proceeding
  

  Morena, Alberto; Scapin, Martina; Peroni, Lorenzo
  In: 3rd International Conference on Impact Loading of Structures and Materials ICILSM 2022
  NTNU
  International Conference on Impact Loading of Structures and Materials ICILSM 2022
  

• Experimental investigation under laser-driven shocks of the dynamic behavior of materials for beam-intercepting devices in particle accelerators
  Proceeding
  

  Baudin, Lucie; Accettura, Carlotta; Morena, Alberto; Wegert, Leonard; Martynenko, Artem S.; Neumayeur, Paul; Tomut, Marilena; Bertarelli, Alessandro; Carra, Federico; Peroni, Lorenzo; Scapin, Martina; C, Christian Brabetz
  In: 3rd International Conference on Impact Loading of Structures and Materials ICILSM 2022
  NTNU
  ICILSM 2022 (Throndheim) 13-17 June 2022
  Vol.3rd International Conference on Impact Loading of Structures and Materials ICILSM 2022 pp.2 (pp.48-49) ISBN:9788299824958

• Surface modification of SiC to improve joint strength via a Corona plasma treatment
  Article
  

  De Zanet, A.; Salvo, M.; Casalegno, V.
  CERAMICS INTERNATIONAL
  Elsevier Ltd
  Vol.48 pp.6 (pp.23492-23497) ISSN:0272-8842 DOI:10.1016/j.ceramint.2022.04.344

• ON THE CORROSION RESISTANCE OF SOME P/M FERROUS MATERIALS AFTER STEAM TREATMENT
  Other
  

  Rosalbino, Francesco; Scavino, Giorgio; Ubertalli, Graziano
  Zenodo (SVIZZERA)
  pp.17 (pp.1-17) DOI:10.5281/zenodo.6602353

• Corrosion inhibition of aluminium alloy AA7075-T6 by sodium silicate in chloride solution
  Other
  

  Rosalbino, F.; Scavino, G.; Ubertalli, G.
  Zenodo (SVIZZERA)
  pp.18 (pp.1-18) DOI:10.5281/zenodo.6543574

• Crowd-Engineering: Managing Innovative Product Design by Widening Collaborations
  Article
  

  Villa, Agostino; Lombardi, Franco; Faveto, Alberto
  AMERICAN JOURNAL OF ENGINEERING AND APPLIED SCIENCES
  Science Publications
  Vol.15 pp.7 (pp.81-87) ISSN:1941-7020 DOI:10.3844/ajeassp.2022.81.87

• Data-Driven Framework for Electrode Wear Prediction in Resistance Spot Welding
  Proceeding
  

  Panza, L.; Bruno, G.; De Maddis, M.; Lombardi, F.; Russo Spena, P.; Traini, E.
  IFIP ADVANCES IN INFORMATION AND COMMUNICATION TECHNOLOGY
  In: IFIP Advances in Information and Communication Technology
  Springer Science and Business Media Deutschland GmbH
  18th IFIP WG 5.1 International Conference on Product Lifecycle Management, PLM 2021 (Curitiba, (Brazil)) July 11–14, 2021
  Vol.639 pp.14 (pp.239-252) ISSN:1868-4238 ISBN:9783030943349 DOI:10.1007/978-3-030-94335-6_17

• Experimental and Numerical Investigation of a Lattice Structure for Energy Absorption: Application to the Design of an Automotive Crash Absorber
  Article
  

  Boursier Niutta, C.; Ciardiello, R.; Tridello, A.
  POLYMERS
  MDPI
  Vol.14 pp.22 ISSN:2073-4360 DOI:10.3390/polym14061116

• Co-Casting of Al and Al-Foams
  Article
  

  Ferraris, Sara; Santostefano, Antonio; DE MARCO, Frediano; Campagnoli, Elena; Matteis, Paolo; Barbato, Antonio; Molina, Roberto; Ubertalli, Graziano
  ADVANCED ENGINEERING MATERIALS
  Wiley
  pp.13 ISSN:1527-2648 DOI:10.1002/adem.202200116

• Torsion Test vs. Other Methods to Obtain the Shear Strength of Elastic-Plastic Adhesives
  Article
  

  Ferraris, Monica; Salvo, Milena; Casalegno, Valentina; De La Pierre, Stefano; Goglio, Luca; Benelli, Alessandro
  APPLIED SCIENCES
  MDPI
  Vol.12 pp.13 ISSN:2076-3417 DOI:10.3390/app12073284

• Use of electrode displacement signals for electrode degradation assessment in resistance spot welding
  Article
  

  DE MADDIS, Manuela; Panza, Luigi; RUSSO SPENA, Pasquale
  JOURNAL OF MANUFACTURING PROCESSES
  Elsevier Ltd
  Vol.76 pp.13 (pp.93-105) ISSN:1526-6125 DOI:10.1016/j.jmapro.2022.01.060

• Modelling, additive layer manufacturing and testing of interlocking structures for joined components
  Article
  

  Peralta Marino, Gonzalo; De la Pierre, Stefano; Salvo, Milena; Díaz Lantada, Andrés; Ferraris, Monica
  SCIENTIFIC REPORTS
  Nature Publishing Group
  Vol.12 pp.11 ISSN:2045-2322 DOI:10.1038/s41598-022-06521-z

• Statistical models for estimating the fatigue life, the stress–life relation, and the P-S–N curves of metallic materials in Very High Cycle Fatigue: A review
  Article
  

  Tridello, A.; Boursier Niutta, C.; Rossetto, M.; Berto, F.; Paolino, D. S.
  FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
  John Wiley and Sons Inc
  Vol.45 pp.39 (pp.332-370) ISSN:8756-758X DOI:10.1111/ffe.13610

• Infrared Thermography for Investigation of Surface Quality in Dry Finish Turning of Ti6Al4V
  Article
  

  De Maddis, M.; Lunetto, V.; Razza, V.; Russo Spena, P.
  METALS
  MDPI
  Vol.12 pp.13 ISSN:2075-4701 DOI:10.3390/met12010154

• Effect of friction on a crashworthiness test of flat composite plates
  Article
  

  Vigna, Lorenzo; Calzolari, Andrea; Galizia, Giuseppe; Belingardi, Giovanni; Paolino, Davide Salvatore
  FORCES IN MECHANICS
  Elsevier
  Vol.6 pp.9 ISSN:2666-3597 DOI:10.1016/j.finmec.2021.100070

• Glass-to-metal seals for solid oxide cells at the Politecnico di Torino, an overview
  Article
  

  Smeacetto, F; Chrysanthou, A; Sabato, A. G.; Javed, H; Pierre, S. D. L.; Salvo, M.; Ferraris, M.
  INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY
  The American Ceramic Society
  Vol.19 pp.12 (pp.1017-1028) ISSN:1744-7402 DOI:10.1111/ijac.13949

• Impact and high strain-rate tests at high temperature
  Book chapter
  

  Scapin, Martina; Peroni, Lorenzo
  Advances in Experimental Impact Mechanics
  Elsevier
  pp.49 (pp.189-237) ISBN:9780128233252 DOI:10.1016/B978-0-12-823325-2.00002-9

• Design of a Physics-Based and Data-Driven Hybrid Model for Predictive Maintenance
  Proceeding
  

  Traini, E.; Bruno, G.; Lombardi, F.
  IFIP ADVANCES IN INFORMATION AND COMMUNICATION TECHNOLOGY
  In: Advances in Production Management Systems. Artificial Intelligence for Sustainable and Resilient Production Systems. APMS 2021
  Springer
  IFIP WG 5.7 International Conference, APMS 2021 (Nantes, France) September 5–9, 2021
  pp.8 (pp.536-543) ISSN:1868-4238 ISBN:9783030859145 DOI:10.1007/978-3-030-85914-5_57

• Generation of cytocompatible superhydrophobic Zr–Cu–Ag metallic glass coatings with antifouling properties for medical textiles
  Article
  

  Sharifikolouei, Elham; Najmi, Ziba; Andreacochis, ; Calogero Scalia, Alessandro; Aliabadi, Maryam; Perero, Sergio; Rimondini, Lia
  MATERIALS TODAY BIO
  Elsevier B.V.
  Vol.12 pp.13 ISSN:2590-0064 DOI:10.1016/j.mtbio.2021.100148

• Al-based foams as permanent cores in al castings: Effect of surface skin thickness and composition on infiltration and core-shell bonding
  Article
  

  Ferraris, S.; Santostefano, A.; Barbato, A.; Molina, R.; Ubertalli, G.
  METALS
  MDPI
  Vol.11 pp.14 ISSN:2075-4701 DOI:10.3390/met11111715

• An innovative methodology for the efficient numerical simulation of adhesive joints subjected to ultrasonic very-high-cycle fatigue tests
  Proceeding
  

  Pederbelli, D.; Paolino, D. S.; Tridello, A.; Goglio, L.
  In: Book of Abstracts
  Quantica Editora, Lda (PORTOGALLO)
  AB 2021 - 6th International Conference on Structural Adhesive Bonding (Porto (PT)) 8-9 July 2021
  pp.1 ISBN:9789899017641

• Investigation on the failure behaviour of adhesively bonded composite joints by using the Arcan test
  Proceeding
  

  Benelli, A.; Ciardiello, R.; L Goglio, L.
  In: Book of Abstracts
  Quantica Editora, Lda (PORTOGALLO)
  AB 2021 - 6th International Conference on Structural Adhesive Bonding (Porto (PT)) 8-9 July 2021
  pp.1 ISBN:9789899017641

• Numerical modelling of the mechanical response of lattice structures produced through AM
  Proceeding
  

  Ripa, M. Della; Paolino, D. S.; Amorese, A.; Tridello, A.
  PROCEDIA STRUCTURAL INTEGRITY
  Elsevier
  Vol.33 pp.10 (pp.714-723) ISSN:2452-3216 DOI:10.1016/j.prostr.2021.10.079

• Effects of plasma treatments of polypropylene adhesive joints used in the automotive industry
  Article
  

  Ciardiello, R.; D'Angelo, D.; Cagna, L.; Croce, A.; Paolino, D. S.
  PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART C, JOURNAL OF MECHANICAL ENGINEERING SCIENCE
  SAGE Publications Ltd
  pp.15 ISSN:0954-4062 DOI:10.1177/09544062211065361

• An innovative nondestructive technique for the local assessment of residual elastic properties in laminated composites
  Proceeding
  

  Boursier Niutta, C.; Tridello, A.; Belingardi, G.; Paolino, D. S.
  PROCEDIA STRUCTURAL INTEGRITY
  In: Procedia Structural Integrity
  Elsevier B.V.
  26th International Conference on Fracture and Structural Integrity, IGF26 2021 (ita) 2021
  Vol.33 pp.10 (pp.347-356) ISSN:2452-3216 DOI:10.1016/j.prostr.2021.10.042

• Numerical Simulations of Laser-Induced Shock Experiments on Graphite
  Article
  

  Morena, Alberto; Peroni, Lorenzo
  MATERIALS
  MDPI
  Vol.14 pp.19 ISSN:1996-1944 DOI:10.3390/ma14227079

• The mechanical performance of re-bonded and healed adhesive joints activable through induction heating systems
  Article
  

  Ciardiello, R.
  MATERIALS
  MDPI
  Vol.14 pp.11 ISSN:1996-1944 DOI:10.3390/ma14216351

• Effect of impact speed and friction on the in-plane crashworthiness of composite plates
  Proceeding
  

  Vigna, Lorenzo; Calzolari, Andrea; Galizia, Giuseppe; Belingardi, Giovanni; Paolino, Davide Salvatore
  PROCEDIA STRUCTURAL INTEGRITY
  In: 26th International Conference on Fracture and Structural Integrity
  Elsevier
  IGF26 - 26th International Conference on Fracture and Structural Integrity (Torino (Italia)) 25-31 Maggio 2021
  Vol.33 pp.7 (pp.623-629) ISSN:2452-3216 DOI:10.1016/j.prostr.2021.10.069

• Development of a key performance indicator framework for automated warehouse systems
  Proceeding
  

  Faveto, Alberto; Traini, Emiliano; Bruno, Giulia; Lombardi, Franco
  IFAC-PAPERSONLINE
  In: 17th IFAC Symposium on Information Control Problems in Manufacturing INCOM 2021
  Elsevier
  17th IFAC Symposium on Information Control Problems in Manufacturing INCOM 2021 (Milan) 19 July 2021 through 20 July 2021
  Vol.54 pp.6 (pp.116-121) ISSN:2405-8963 DOI:10.1016/j.ifacol.2021.08.013

• Numerical simulations of components produced by fused deposition 3D printing
  Article
  

  Scapin, M.; Peroni, L.
  MATERIALS
  MDPI AG
  Vol.14 pp.18 ISSN:1996-1944 DOI:10.3390/ma14164625

• Plastic behavior of laser‐deposited inconel 718 superalloy at high strain rate and temperature
  Article
  

  Peroni, L.; Scapin, M.
  APPLIED SCIENCES
  MDPI AG
  Vol.11 pp.17 ISSN:2076-3417 DOI:10.3390/app11167765

• Thermomechanical tensile properties of deposited Inconel 718 superalloy over a wide range of strain rate and temperature
  Proceeding
  

  Scapin, Martina; Peroni, Lorenzo; Yuan, Kangbo; Guo, Weiguo
  EPJ WEB OF CONFERENCES
  In: EPJ Web Conf., 250 (2021) 05017
  Edp Sciences
  DYMAT 2021 - 13th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading (Madrid)
  Vol.250 ISSN:2100-014X DOI:10.1051/epjconf/202125005017

• A new statistical software for the estimation of P-S-N curves in presence of defects: statistical models and experimental validation
  Proceeding
  

  Tridello, A.; Paolino, D. S.
  IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING
  IOP PUBLISHING LTD
  Vol.1038 pp.11 ISSN:1757-8981 DOI:10.1088/1757-899X/1038/1/012029

• An experimental-numerical methodology for the nondestructive assessment of the dynamic elastic properties of adhesives
  Proceeding
  

  Tridello, A; Ciardiello, R; Paolino, Ds; Goglio, L
  IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING
  IOP PUBLISHING LTD
  Vol.1038 pp.10 ISSN:1757-8981 DOI:10.1088/1757-899X/1038/1/012028

• Residual properties in damaged laminated composites through nondestructive testing: A review
  Article
  

  Boursier Niutta, C.; Tridello, A.; Paolino, D. S.; Belingardi, G.
  MATERIALS
  MDPI AG
  Vol.14 pp.23 ISSN:1996-1944 DOI:10.3390/ma14164513

• Static strength of brittle materials under multiaxial nonuniform stress states: A novel statistical model for assessing size effects
  Article
  

  Pagnoncelli, A. P.; Tridello, A.; Paolino, D. S.
  FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
  Blackwell Publishing Ltd
  Vol.44 pp.17 (pp.997-1013) ISSN:8756-758X DOI:10.1111/ffe.13409

• Size-effect in Very High Cycle Fatigue: A review
  Article
  

  Tridello, A.; Boursier Niutta, C.; Berto, F.; Paolino, D. S.
  INTERNATIONAL JOURNAL OF FATIGUE
  Elsevier Ltd
  Vol.153 pp.20 ISSN:0142-1123 DOI:10.1016/j.ijfatigue.2021.106462

• Fatigue failures from defects in additive manufactured components: A statistical methodology for the analysis of the experimental results
  Article
  

  Tridello, A.; Boursier Niutta, C.; Berto, F.; Qian, G.; Paolino, D. S.
  FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
  Blackwell Publishing Ltd
  Vol.44 pp.17 (pp.1944-1960) ISSN:8756-758X DOI:10.1111/ffe.13467

• Very high cycle fatigue life and critical defect size: Modeling of statistical size effects
  Article
  

  Paolino, D. S.
  FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
  Blackwell Publishing Ltd
  Vol.44 pp.16 (pp.1209-1224) ISSN:8756-758X DOI:10.1111/ffe.13424

• Influence of low-ph beverages on the two-body wear of cad/cam monolithic materials
  Article
  

  Scotti, N.; Ionescu, A.; Comba, A.; Baldi, A.; Brambilla, E.; Vichi, A.; Goracci, C.; Ciardiello, R.; Tridello, A.; Paolino, D.; Botto, D.
  POLYMERS
  MDPI
  Vol.13 pp.9 ISSN:2073-4360 DOI:10.3390/polym13172915

• An Epoxy Adhesive Crosslinked through Radical‐Induced Cationic Frontal Polymerization
  Article
  

  Turani, Matteo; Baggio, Andrea; Casalegno, Valentina; Salvo, Milena; Sangermano, Marco
  MACROMOLECULAR MATERIALS AND ENGINEERING
  Wiley
  pp.7 ISSN:1438-7492 DOI:10.1002/mame.202100495

• Very high cycle fatigue (VHCF) response of additively manufactured materials: A review
  Article
  

  Caivano, Riccardo; Tridello, Andrea; Chiandussi, Giorgio; Qian, Guian; Paolino, Davide; Berto, Filippo
  FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
  Wiley Online Library
  pp.25 ISSN:8756-758X DOI:10.1111/ffe.13567

• Aluminum Foams as Permanent Cores in Casting
  Proceeding
  

  Ferraris, Sara; Ubertalli, Graziano; Santostefano, Antonio; Barbato, Antonio
  MATERIALS PROCEEDINGS
  In: Materials Proceedings
  MDPI
  The 1st International Electronic Conference on Metallurgy and Metals (IEC2M 2021)
  Vol.4 pp.4 ISSN:2673-4605 DOI:10.3390/IOCN2020-07840

• Multifunctional stratified composite coatings by electrophoretic deposition and RF co-sputtering for orthopaedic implants
  Article
  

  Nawaz, Q; Fastner S., S.; Rehman, M. A. U.; Ferraris, S.; Perero, S.; Gautier di Confiengo, G.; Yavuz, E.; Ferraris, M.; Boccaccini, A. R.
  JOURNAL OF MATERIALS SCIENCE
  Springer Nature
  Vol.56 pp.16 (pp.7920-7935) ISSN:0022-2461 DOI:10.1007/s10853-020-05725-w

• Study on the joining of ceramic matrix composites to an Al alloy for advanced brake systems
  Article
  

  Casalegno, Valentina; Smeacetto, Federico; Salvo, Milena; Sangermano, Marco; Baino, Francesco; Noé, Camilla; Orlandi, Marco; Piavani, Riccardo; Bonfanti, Roberto; Ferraris, Monica
  CERAMICS INTERNATIONAL
  elsevier
  Vol.47 pp.11 (pp.23463-23473) ISSN:0272-8842 DOI:10.1016/j.ceramint.2021.05.062

• Innovative formulation for topological fatigue optimisation based on material defects distribution and TopFat algorithm
  Article
  

  Gao, X.; Caivano, R.; Tridello, A.; Chiandussi, G.; Ma, H.; Paolino, D.; Berto, F.
  INTERNATIONAL JOURNAL OF FATIGUE
  Elsevier
  Vol.147 pp.15 ISSN:0142-1123 DOI:10.1016/j.ijfatigue.2021.106176

• Development and characterisation of a Y2Ti2O7-based glass-ceramic as a potential oxidation protective coating for titanium suboxide (TiOx)
  Article
  

  D’Isanto, Fabiana; Smeacetto, Federico; Martin, Hans-Peter; Sedlák, Richard; Lisnichuk, Maksym; Chrysanthou, Andreas; Salvo, Milena
  CERAMICS INTERNATIONAL
  Elsevier
  Vol.47 pp.10 (pp.19774-19783) ISSN:0272-8842 DOI:10.1016/j.ceramint.2021.03.316

• Building a Factory Knowledge Base
  Book chapter
  

  Bruno, Giulia; Traini, Emiliano; Faveto, Alberto; Lombardi, Franco
  Driving Innovation and Productivity Through Sustainable Automation
  IGI Global
  pp.26 (pp.50-75) ISBN:9781799858799 DOI:10.4018/978-1-7998-5879-9.ch003

• Nondestructive determination of local material properties of laminated composites with the impulse excitation technique
  Article
  

  Boursier Niutta, C.; Tridello, A.; Belingardi, G.; Paolino, D. S.
  COMPOSITE STRUCTURES
  Elsevier
  Vol.262 pp.10 ISSN:0263-8223 DOI:10.1016/j.compstruct.2021.113607

• Effect of iron oxide and graphene particles on joint strength and dismounting characteristics of a thermoplastic adhesive
  Article
  

  Ciardiello, R.; Belingardi, G.; Litterio, F.; Brunella, V.
  INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
  Elsevier
  Vol.107 pp.8 ISSN:0143-7496 DOI:10.1016/j.ijadhadh.2021.102850

• Single-lap joints of similar and dissimilar adherends bonded with a polyurethane adhesive used in the automotive industry
  Proceeding
  

  Ciardiello, R; Boursier Niutta, C; Di Sciullo, F; Goglio, L
  IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING
  IOP Publishing
  Vol.1038 pp.12 (pp.1-12) ISSN:1757-8981 DOI:10.1088/1757-899X/1038/1/012031

• Vitrification of municipal solid waste incineration fly ash: An approach to find the successful batch compositions
  Article
  

  Sharifikolouei, E.; Baino, F.; Salvo, M.; Tommasi, T.; Pirone, R.; Fino, D.; Ferraris, M.
  CERAMICS INTERNATIONAL
  Elsevier Ltd
  Vol.47 pp.7 (pp.7738-7744) ISSN:0272-8842 DOI:10.1016/j.ceramint.2020.11.118

• Nanostructured composite coating endowed with antiviral activity against human respiratory viruses deposited on fibre-based air filters
  Article
  

  Balagna, C.; Francese, R.; Perero, S.; Lembo, D.; Ferraris, M.
  SURFACE & COATINGS TECHNOLOGY
  Elsevier
  Vol.409 pp.8 ISSN:0257-8972 DOI:10.1016/j.surfcoat.2021.126873

• Crack initiation behavior and fatigue performance up to very-high-cycle regime of AlSi10Mg fabricated by selective laser melting with two powder sizes
  Article
  

  Jian, Z. M.; Qian, G. A.; Paolino, D. S.; Tridello, A.; Berto, F.; Hong, Y. S.
  INTERNATIONAL JOURNAL OF FATIGUE
  Elsevier
  Vol.143 pp.12 (pp.1-12) ISSN:0142-1123 DOI:10.1016/j.ijfatigue.2020.106013

• Laser surface texturing of ceramics and ceramic composite materials – A review
  Article
  

  De Zanet, A.; Casalegno, V.; Salvo, M.
  CERAMICS INTERNATIONAL
  Elsevier Ltd
  Vol.47 pp.14 (pp.7307-7320) ISSN:0272-8842 DOI:10.1016/j.ceramint.2020.11.146

• Ytterbium disilicate-based glass-ceramic as joining material for ceramic matrix composites
  Article
  

  Smeacetto, F.; D'Isanto, F.; Casalegno, V.; Tatarko, P.; Salvo, M.
  JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
  Elsevier Ltd
  Vol.41 pp.8 (pp.1099-1106) ISSN:0955-2219 DOI:10.1016/j.jeurceramsoc.2020.10.022

• An innovative fixture for testing the crashworthiness of composite materials
  Article
  

  Vigna, Lorenzo; Babaei, Iman; Garg, Ravin; Belingardi, Giovanni; Paolino, DAVIDE SALVATORE; Calzolari, Andrea; Galizia, Giuseppe
  FRATTURA E INTEGRITÀ STRUTTURALE
  Gruppo Italiano Frattura (IGF)
  Vol.15 pp.12 (pp.76-87) ISSN:1971-8993 DOI:10.3221/IGF-ESIS.55.06

• Impact response of an origami-shaped composite crash box: Experimental analysis and numerical optimization
  Article
  

  Ciampaglia, Alberto; Fiumarella, Dario; BOURSIER NIUTTA, Carlo; Ciardiello, Raffaele; Belingardi, Giovanni
  COMPOSITE STRUCTURES
  Elsevier
  Vol.256 pp.8 ISSN:0263-8223 DOI:10.1016/j.compstruct.2020.113093

• Towards digital lean manufacturing: A Brazilian case
  Proceeding
  

  Sordan, J. E.; Oprime, P. C.; Pimenta, M.; Lombardi, F.; Chiabert, P.
  In: International Conference on Quality Engineering and Management
  Universidade do Minho
  4th International Conference on Quality Engineering and Management, ICQEM 2020
  Vol.2020- pp.16 (pp.184-199) ISBN:9789895491100

• Implementation and evaluation of MES in one-of-a-kind production
  Proceeding
  

  Bruno, G.; Lombardi, F.; Orlando, M.
  In: Proceedings of the International Conference on Innovative Intelligent Industrial Production and Logistics (IN4PL 2020)
  SCITEPRESS – Science and Technology Publications
  International Conference on Innovative Intelligent Industrial Production and Logistics (IN4PL 202
  pp.7 (pp.117-123) ISBN:9789897584763 DOI:10.5220/0010173601170123

• Implementation and Evaluation of MES in One-of-a-Kind Production
  Proceeding
  

  Orlando, Mattia; Lombardi, Franco; Bruno, Giulia
  In: Proceedings of International Conference on Innovative Intelligent Industrial Production and Logistics - IN4PL
  SCITEPRESS
  International Conference on Innovative Intelligent Industrial Production and Logistics (IN4PL 2020)
  pp.7 (pp.117-123) ISBN:9789897584763 DOI:10.5220/0010173601170123

• Effect of microstructure, residual stresses and building orientation on the fatigue response up to 109 cycles of an SLM AlSi10Mg alloy
  Article
  

  Tridello, A.; Fiocchi, J.; Biffi, C. A.; Chiandussi, G.; Rossetto, M.; Tuissi, A.; Paolino, D. S.
  INTERNATIONAL JOURNAL OF FATIGUE
  Elsevier Ltd
  Vol.137 pp.10 ISSN:0142-1123 DOI:10.1016/j.ijfatigue.2020.105659

• Development of specific heat treatments for aluminum alloys produced by SLM: Effect on residual stresses and fatigue strength
  Article
  

  Biffi, C. A.; Fiocchi, J.; Tuissi, A.; Tridello, A.; Chiandussi, G.; Rossetto, M.; Paolino, D. S.; Colombo, C.; Vergani, L. M.
  LA METALLURGIA ITALIANA
  Associazione Italiana di Metallurgia
  Vol.112 pp.8 (pp.38-45) ISSN:0026-0843

• Topology and fibre orientation simultaneous optimisation: A design methodology for fibre-reinforced composite components
  Article
  

  Caivano, R.; Tridello, A.; Paolino, D.; Chiandussi, G.
  PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART L, JOURNAL OF MATERIALS, DESIGN AND APPLICATIONS.
  SAGE Publications Ltd
  Vol.234 pp.13 (pp.1267-1279) ISSN:1464-4207 DOI:10.1177/1464420720934142

• Tool condition monitoring framework for predictive maintenance: a case study on milling process
  Article
  

  Traini, E.; Bruno, G.; Lombardi, F.
  INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH
  Taylor & Francis
  pp.15 (pp.1-15) ISSN:0020-7543 DOI:10.1080/00207543.2020.1836419

• Design and Simulation of a Battery Swapping System for Electric Vehicles
  Proceeding
  

  Traini, E.; Faveto, A.; Bruno, G.; Lombardi, F.
  PROCEEDINGS IEEE INTERNATIONAL CONFERENCE ON EMERGING TECHNOLOGIES AND FACTORY AUTOMATION
  In: IEEE International Conference on Emerging Technologies and Factory Automation, ETFA
  IEEE
  25th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2020 (Vienna, Austria) 2020
  Vol.2020- pp.7 (pp.837-843) ISSN:1946-0740 ISBN:9781728189567 DOI:10.1109/ETFA46521.2020.9212062

• Lean Six Sigma in manufacturing process: a bibliometric study and research agenda
  Article
  

  Sordan, J. E.; Oprime, P. C.; Pimenta, M. L.; Chiabert, P.; Lombardi, F.
  THE TQM JOURNAL
  Emerald Group Publishing Ltd.
  Vol.32 pp.19 (pp.381-399) ISSN:1754-2731 DOI:10.1108/TQM-08-2019-0207

• Design and study of the mechanical behavior of adhesive joints for the automotive industry
  Article
  

  Ciardiello, R.; Goglio, L.
  RIVISTA ITALIANA DELLA SALDATURA
  Instituto Italiano della Saldatura
  Vol.72 pp.2 (pp.336-337) ISSN:0035-6794

• Modelling size effects for static strength of brittle materials
  Article
  

  Pagnoncelli, A. P.; Tridello, A.; Paolino, D. S.
  MATERIALS & DESIGN
  Elsevier
  Vol.195 pp.12 (pp.1-12) ISSN:0264-1275 DOI:10.1016/j.matdes.2020.109052

• Electrochemical corrosion behavior of LDX 2101® duplex stainless steel in a fluoride‐containing environment
  Article
  

  Rosalbino, Francesco; Scavino, Giorgio; Ubertalli, Graziano
  MATERIALS AND CORROSION
  © 2020 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim
  Vol.71 pp.8 (pp.2021-2028) ISSN:1521-4176 DOI:10.1002/maco.202011826

• Al-Based Metal Foams (AMF) as Permanent Cores in Casting: State-of-the-Art and Future Perspectives
  Article
  

  Ubertalli, Graziano; Ferraris, Sara
  METALS
  MDPI
  Vol.10 pp.20 ISSN:2075-4701 DOI:10.3390/met10121592

• Newly Developed Anti-Buckling Fixture to Assess the In-Plane Crashworthiness of Flat Composite Specimens
  Article
  

  Babaei, Iman; Garg, Ravin; Vigna, Lorenzo; Paolino, Davide S.; Belingardi, Giovanni; Cascone, Lucio; Calzolari, Andrea; Galizia, Giuseppe
  APPLIED SCIENCES
  MDPI
  Vol.10 pp.19 ISSN:2076-3417 DOI:10.3390/app10217797

• Predicting Composite Component Behavior Using Element Level Crashworthiness Tests, Finite Element Analysis and Automated Parametric Identification
  Article
  

  Garg, Ravin; Babaei, Iman; Paolino, DAVIDE SALVATORE; Vigna, Lorenzo; Cascone, Lucio; Calzolari, Andrea; Galizia, Giuseppe; Belingardi, Giovanni
  MATERIALS
  MDPI
  Vol.13 pp.21 (pp.1-21) ISSN:1996-1944 DOI:10.3390/ma13204501

• Mechanical properties of a reversible adhesive used to separate adhesive joints
  Article
  

  Ciardiello, Raffaele
  MATERIAL DESIGN & PROCESSING COMMUNICATIONS
  John Wiley & Sons, Ltd
  pp.6 (pp.1-6) ISSN:2577-6576 DOI:10.1002/mdp2.147

• Design and study of the mechanical behavior of adhesive joints for the automotive industry - Progettazione e studio del comportamento meccanico di giunzioni adesive per l’industria dell’autoveicolo
  Other
  

  Ciardiello, R.; Goglio, L.
  RIVISTA ITALIANA DELLA SALDATURA
  Istituto Italiano della Saldatura (ITALIA)
  Vol.72 pp.2 (pp.336-337) ISSN:0035-6794

• Experimental investigation on adhesively bonded U-shaped metallic joints using the Arcan test
  Article
  

  Ciardiello, R.; Greco, L.; Miranda, M.; Sciullo, F. Di; Goglio, L.
  JOURNAL OF ADVANCED JOINING PROCESSES
  Elsevier
  Vol.1 pp.7 ISSN:2666-3309 DOI:10.1016/j.jajp.2020.100010

• Effect of graphene nanoplatelets on the impact response of a carbon fibre reinforced composite
  Article
  

  Elmarakbi, A.; Ciardiello, R.; Tridello, A.; Innocente, F.; Martorana, B.; Bertocchi, F.; Cristiano, F.; Elmarakbi, M.; Belingardi, G.
  MATERIALS TODAY COMMUNICATIONS
  Elsevier Ltd
  Vol.25 pp.11 ISSN:2352-4928 DOI:10.1016/j.mtcomm.2020.101530

• Torsional shear strength and elastic properties of adhesively bonded glass-to-steel components
  Article
  

  De La Pierre, S.; Scalici, T.; Tatarko, P.; Valenza, A.; Goglio, L.; Paolino, D. S.; Ferraris, M.
  MATERIALS & DESIGN
  Elsevier Ltd
  Vol.192 pp.10 ISSN:0264-1275 DOI:10.1016/j.matdes.2020.108739

• Thermomechanical characterization of reinforced and dismountable thermoplastic adhesive joints activated by microwave and induction processes
  Article
  

  Ciardiello, R.; Belingardi, G.; Litterio, F.; Brunella, V.
  COMPOSITE STRUCTURES
  Elsevier
  Vol.244 pp.9 ISSN:0263-8223 DOI:10.1016/j.compstruct.2020.112314

• Working Length Transfer in the Endodontic Clinical Practice: A Comparative Study
  Article
  

  Alovisi, Mario; Dioguardi, Mario; Carossa, Massimo; Troiano, Giuseppe; Chiara Domini, Maria; Paolino, DAVIDE SALVATORE; Chiandussi, Giorgio; Berutti, Elio
  APPLIED SCIENCES
  MDPI
  Vol.10 pp.7 (pp.1-7) ISSN:2076-3417 DOI:10.3390/app10175824

• Dual In-Situ Water Diffusion Monitoring of GFRPs based on Optical Fibres and CNTs
  Article
  

  Marro Bellot, Cristian; de Leo, Giulia; Zhang, Han; Kernin, Arnaud; Scarponi, Claudio; Sangermano, Marco; Olivero, Massimo; Bilotti, Emiliano; Salvo, Milena
  JOURNAL OF COMPOSITES SCIENCE
  MDPI
  Vol.4 pp.11 ISSN:2504-477X DOI:10.3390/jcs4030097

• Virucidal effect against Coronavirus SARS-CoV-2 of a silver nanocluster/silica composite sputtered coating
  Article
  

  Balagna, Cristina; Perero, Sergio; Percivalle, Elena; Vecchio Nepita, Edoardo; Ferraris, Monica
  OPEN CERAMICS
  elsevier
  Vol.1 pp.3 ISSN:2666-5395 DOI:10.1016/j.oceram.2020.100006

• Effect of position and force tool control in friction stir welding of dissimilar aluminum-steel lap joints for automotive applications
  Article
  

  Safeen, M. W.; Russo Spena, P.; Buffa, G.; Campanella, D.; Masnata, A.; Fratini, L.
  ADVANCES IN MANUFACTURING
  Shanghai University Springer
  Vol.8 pp.13 (pp.59-71) ISSN:2095-3127 DOI:10.1007/s40436-019-00290-1

• Oxidation protective glass coating for magnesium silicide based thermoelectrics
  Article
  

  D'Isanto, Fabiana; Smeacetto, Federico; Reece, Michael John; Chen, Kan; Salvo, Milena
  CERAMICS INTERNATIONAL
  Elsevier
  Vol.46 pp.6 (pp.24312-24317) ISSN:0272-8842 DOI:10.1016/j.ceramint.2020.06.212

• Dolomite-foamed bioactive silicate scaffolds for bone tissue repair
  Article
  

  Fiume, E.; Tulyaganov, D.; Ubertalli, G.; Verne, E.; Baino, F.
  MATERIALS
  MDPI AG
  Vol.13 pp.13 ISSN:1996-1944 DOI:10.3390/ma13030628

• Controlling bacterial adhesion to titanium surfaces: new strategies for surfaces with tailorable antiadhesive/ antibacterial properties
  Proceeding
  

  Ferraris, Sara; Spriano, Silvia; Perero, Sergio; Costa, Piero; Gautier di Confiengo, Giovanna; Cochis, Andrea; Warchomicka, Fernando; Yamaguchi, Seiji; Rimondini, Lia; Verne', Enrica; Ferraris, Monica
  In: 11th World Biomaterials Congress WBC 2020
  WBC2020 Conference Secretariat
  11th World Biomaterials Congress WBC 2020
  

• A plasma pre-treatment to improve adhesion on SiC and Si3N4 ceramics
  Article
  

  Casalegno, Valentina; Ferraris, Monica; Perero, Sergio; Suess, Manuela; Wilhelmi, Christian; Pedroni, Matteo; Vassallo, Espedito; Salvo, Milena
  MATERIALS LETTERS
  Elsevier
  Vol.272 pp.4 ISSN:0167-577X DOI:10.1016/j.matlet.2020.127855

• Fatigue response up to 10^9 cycles of a structural epoxy adhesive
  Article
  

  Tridello, Andrea; Ciardiello, Raffaele; Paolino, Davide Salvatore; Goglio, Luca
  FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
  Wiley
  pp.12 ISSN:8756-758X DOI:10.1111/ffe.13240

• Evaluation of Pressure Distribution against Root Canal Walls of NiTi Rotary Instruments by Finite Element Analysis
  Article
  

  Carpegna, Giorgia; Alovisi, Mario; Paolino, Davide Salvatore; Marchetti, Andrea; Gibello, Umberto; Scotti, Nicola; Pasqualini, Damiano; Scattina, Alessandro; Chiandussi, Giorgio; Berutti, Elio
  APPLIED SCIENCES
  MDPI
  Vol.10 pp.9 ISSN:2076-3417 DOI:10.3390/app10082981

• VHCF response of AM materials: A literature review
  Article
  

  Tridello, Andrea; Paolino, Davide S.
  MATERIAL DESIGN & PROCESSING COMMUNICATIONS
  Wiley
  Vol.2 pp.7 (pp.1-7) ISSN:2577-6576 DOI:10.1002/mdp2.121

• Ultrasonic VHCF Tests on Very Large Specimens with Risk-Volume Up to 5000 mm3
  Article
  

  Tridello, Andrea; Paolino, Davide Salvatore; Rossetto, Massimo
  APPLIED SCIENCES
  MDPI
  Vol.10 pp.12 ISSN:2076-3417 DOI:10.3390/app10072210

• Very-high-cycle fatigue behavior of Ti-6Al-4V manufactured by selective laser melting: Effect of build orientation
  Article
  

  Qian, G.; Li, Y.; Paolino, D. S.; Tridello, A.; Berto, F.; Hong, Y.
  INTERNATIONAL JOURNAL OF FATIGUE
  Elsevier Ltd
  Vol.136 pp.13 ISSN:0142-1123 DOI:10.1016/j.ijfatigue.2020.105628

• High strain rate behavior of aluminum alloy for sheet metal forming processes
  Article
  

  Ubertalli, Graziano; Matteis, Paolo; Ferraris, Sara; Marcianò, Caterina; D’Aiuto, Fabio; Maria Tedesco, Michele; De Caro, Daniele
  METALS
  MDPI
  Vol.10 pp.10 ISSN:2075-4701 DOI:10.3390/met10020242

• Vitrified and nonvitrified municipal solid wastes as ordinary Portland cement (OPC) and sand substitution in mortars
  Article
  

  Sharifikolouei, E.; Canonico, F.; Salvo, M.; Baino, F.; Ferraris, M.
  INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY
  Blackwell Publishing Ltd
  Vol.17 pp.11 (pp.573-583) ISSN:1546-542X DOI:10.1111/ijac.13447

• Grafting of gallic acid to metallic surfaces
  Article
  

  Ferraris, Sara; Cazzola, Martina; Ubertalli, Graziano; Prenesti, Enrico; Spriano, Silvia
  APPLIED SURFACE SCIENCE
  Elsevier
  Vol.511 pp.7 ISSN:0169-4332 DOI:10.1016/j.apsusc.2020.145615

• Glass as a joining material for ceramic matrix composites: 25 years of research at Politecnico di Torino
  Article
  

  Ferraris, Monica; Casalegno, Valentina; Smeacetto, Federico; Salvo, Milena
  INTERNATIONAL JOURNAL OF APPLIED GLASS SCIENCE
  Wiley
  Vol.11 pp.8 (pp.569-576) ISSN:2041-1286 DOI:10.1111/ijag.15032

• Joining of SiC, alumina, and mullite by the Refractory Metal—Wrap pressure‐less process
  Article
  

  Gianchandani, Pardeep Kumar; Casalegno, Valentina; De la Pierre des Ambrois, Stefano; Salvo, Milena; De Aloysio, Giulia; Laghi, Luca; Ferraris, Monica
  INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY
  Wiley
  pp.10 ISSN:1546-542X DOI:10.1111/ijac.13477

• Interfacial reaction between ZrNbHfTa foil and graphite: Formation of high-entropy carbide and the effect of heating rate on its microstructure
  Article
  

  Biesuz, M.; Saunders, T. G.; Chen, K.; Bortolotti, M.; Salvo, M.; Grasso, S.; Reece, M. J.
  JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
  Elsevier Ltd
  Vol.40 pp.10 (pp.2699-2708) ISSN:0955-2219 DOI:10.1016/j.jeurceramsoc.2019.12.011

• Antipathogen nanostructured coating for air filters
  Article
  

  Balagna, C.; Perero, S.; Bosco, F.; Mollea, C.; Irfan, M.; Ferraris, M.
  APPLIED SURFACE SCIENCE
  Elsevier B.V.
  Vol.508 pp.9 ISSN:0169-4332 DOI:10.1016/j.apsusc.2020.145283

• Plastic flow behavior of twinning induced plasticity steel from low to warm temperatures
  Article
  

  De Maddis, M.; Spena, P. R.
  JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY
  Elsevier Editora Ltda
  Vol.9 pp.12 (pp.1708-1719) ISSN:2238-7854 DOI:10.1016/j.jmrt.2019.11.094

• Antibacterial inorganic coatings on metallic surfaces for temporary fixation devices
  Article
  

  Ferraris, S.; Perero, S.; Costa, P.; Gautier di Confiengo, G.; Cochis, A.; Rimondini, L.; Renaux, F.; Verne, E.; Ferraris, M.; Spriano, S.
  APPLIED SURFACE SCIENCE
  Elsevier
  pp.9 (pp.1-9) ISSN:0169-4332 DOI:10.1016/j.apsusc.2019.144707

• Characterisation of joined surface modified SiCf/SiC composites
  Article
  

  Casalegno, Valentina; Valenza, Fabrizio; Balagna, Cristina; Sedlák, Richard; Girman, Vladimír; Salvo, Milena; DE LA PIERRE DES AMBROIS, Stefano; Ferraris, Monica
  CERAMICS INTERNATIONAL
  Elsevier
  Vol.46 pp.8 (pp.4159-4166) ISSN:0272-8842 DOI:10.1016/j.ceramint.2019.10.133

• A proposal of dynamic behaviour design based on mode shape tracing: numerical application to a motorbike frame
  Proceeding
  

  Bonisoli, E.; Lisitano, D.; Dimauro, L.; Peroni, L.
  CONFERENCE PROCEEDINGS OF THE SOCIETY FOR EXPERIMENTAL MECHANICS SERIES
  In: Conference Proceedings of the Society for Experimental Mechanics Series
  Springer New York LLC
  pp.10 (pp.149-158) ISSN:2191-5644 ISBN:9783030121839 DOI:10.1007/978-3-030-12184-6_14

• Effect Of Accelerated Ageing Cycles On The Physical And Mechanical Properties Of A Reversible Thermoplastic Adhesive
  Article
  

  Ciardiello, R.; Belingardi, G.; Martorana, B.; Brunella, V.
  JOURNAL OF ADHESION
  Taylor and Francis Inc.
  pp.24 (pp.1-24) ISSN:0021-8464 DOI:10.1080/00218464.2018.1553714

• Influence of testing velocity on mechanical strength and failure modes of single-lap joints made with hot-melt adhesive and polyolefin substrates
  Proceeding
  

  Ciardiello, R.; Tridello, A.; Belingardi, G.; Goglio, L.
  In: Book of Abstracts
  Quantica Editora, Lda (PORTOGALLO)
  AB 2019 - 5th International Conference on Structural Adhesive Bonding (Porto (PT)) 11-12 July 2019
  pp.1 ISBN:9789898927743

• Shear strength of adhesive bonds: comparison of lap-shear, asymmetric 4-point-bending and torsion tests
  Proceeding
  

  Ferraris, Monica; Salvo, Milena; Casalegno, Valentina; De La Pierre, Stefano; Goglio, Luca; Wilhelmi, C.; Funke, M.; Suess, M.
  In: Book of Abstracts
  Quantica Editora, Lda (PORTOGALLO)
  AB 2019 - 5th International Conference on Structural Adhesive Bonding (Porto (PT)) 11-12 July 2019
  pp.1 ISBN:9789898927743

• Effect of Strain-Rate and Temperature on Mechanical Response of Pure Tungsten
  Article
  

  Scapin, M.; Peroni, L.; Torregrosa, C.; Perillo-Marcone, A.; Calviani, M.
  JOURNAL OF DYNAMIC BEHAVIOR OF MATERIALS
  Springer International Publishing
  Vol.5 pp.13 (pp.296-308) ISSN:2199-7446 DOI:10.1007/s40870-019-00221-y

• Antibacterial and anti-adhesive inorganic coatings on metallic surfaces for temporary fixation devices
  Proceeding
  

  Ferraris, S.; Perero, S.; Costa, P.; Gautier di Confiengo, G.; Vernè, E.; Ferraris, M.; Spriano, S.; Cochis, A.
  In: book of abstracts 3 rd International Conference on Applied Surface Science
  Elsevier
  3 rd International Conference on Applied Surface Science (Pisa) 17-20 giugno 2019
  

• Gallic acid grafting to metallic surface
  Proceeding
  

  Ferraris, S.; Cazzola, M.; Cochis, A.; Ubertalli, G.; Prenesti, E.; Rimondini, L.; Spriano, S.
  In: book of abstracts 3 rd International Conference on Applied Surface Science
  Elsevier
  3 rd International Conference on Applied Surface Science (Pisa) 17-20 giugno 2019
  

• Mechanical characterization and separation tests of a thermoplastic reinforced adhesive used for automotive applications
  Proceeding
  

  Ciardiello, Raffaele
  PROCEDIA STRUCTURAL INTEGRITY
  In: 48th International Conference on Stress Analysis, AIAS 2019
  Elsevier
  48th International Conference on Stress Analysis, AIAS 2019 (Perugia) 4 September 2019through 7 September 2019
  Vol.24 pp.12 (pp.155-166) ISSN:2452-3216 DOI:10.1016/j.prostr.2020.02.014

• A Knowledge-Based System for Collecting and Integrating Production Information
  Proceeding
  

  Bruno, G.; Traini, E.; Lombardi, F.
  IFIP ADVANCES IN INFORMATION AND COMMUNICATION TECHNOLOGY
  In: IFIP Advances in Information and Communication Technology
  Springer New York LLC
  20th IFIP Working Conference on Virtual Enterprises, PRO-VE 2019 (Torino (ITA)) 2019
  Vol.568 pp.8 (pp.163-170) ISSN:1868-4238 ISBN:9783030284633 DOI:10.1007/978-3-030-28464-0_15

• Integration Between PLM and MES for One-of-a-Kind Production
  Proceeding
  

  Traini, E.; Bruno, G.; Awouda, A.; Chiabert, P.; Lombardi, F.
  IFIP ADVANCES IN INFORMATION AND COMMUNICATION TECHNOLOGY
  In: IFIP Advances in Information and Communication Technology
  Springer
  16th IFIP WG 5.1 International Conference on Product Lifecycle Management, PLM 2019 (rus) 2019
  Vol.565 pp.10 (pp.356-365) ISSN:1868-4238 ISBN:9783030422493 DOI:10.1007/978-3-030-42250-9_34

• An analytical model to estimate AVS/RS energy consumption
  Proceeding
  

  D'Antonio, G.; Bruno, G.; Traini, E.; Lombardi, F.
  IFAC-PAPERSONLINE
  In: IFAC-PapersOnLine
  Elsevier B.V.
  9th IFAC Conference on Manufacturing Modelling, Management and Control, MIM 2019 (deu) 2019
  Vol.52 pp.6 (pp.24-29) ISSN:2405-8963 DOI:10.1016/j.ifacol.2019.11.086

• Machine learning framework for predictive maintenance in milling
  Proceeding
  

  Traini, Emiliano; Bruno, Giulia; D’Antonio, Gianluca; Lombardi, Franco
  IFAC-PAPERSONLINE
  In: Titolo volume non avvalorato
  Elsevier
  9th IFAC Conference on Manufacturing Modelling, Management and Control MIM 2019 (Berlino (D)) 28–30 August 2019
  Vol.52 pp.6 (pp.177-182) ISSN:2405-8963 DOI:10.1016/j.ifacol.2019.11.172

• VHCF response of heat-treated SLM Ti6Al4V Gaussian specimens with large loaded volume
  Article
  

  Tridello, A.; Fiocchi, J.; Biffi, C. A.; Chiandussi, G.; Rossetto, M.; Tuissi, A.; Paolino, D. S.
  PROCEDIA STRUCTURAL INTEGRITY
  Elsevier B.V.
  Vol.18 pp.8 (pp.314-321) ISSN:2452-3216 DOI:10.1016/j.prostr.2019.08.171

• VHCF Response up to 109 Cycles of SLM AlSi10Mg Specimens Built in a Vertical Direction
  Article
  

  Paolino, Davide S.; Tridello, Andrea; Fiocchi, Jacopo; Biffi, Carlo A.; Chiandussi, Giorgio; Rossetto, Massimo; Tuissi, Ausonio
  APPLIED SCIENCES
  MDPI
  Vol.9 pp.13 (pp.1-13) ISSN:2076-3417 DOI:10.3390/app9152954

• Influence of the annealing and defects on the VHCF behavior of an SLM AlSi10Mg alloy
  Article
  

  Tridello, Andrea; Fiocchi, Jacopo; Biffi, Carlo A.; Chiandussi, Giorgio; Rossetto, Massimo; Tuissi, Ausonio; Paolino, Davide S.
  FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
  Wiley
  Vol.42 pp.14 (pp.2794-2807) ISSN:8756-758X DOI:10.1111/ffe.13123

• Effect of autoclave cure time and bonded surface roughness on the static and fatigue performance of polyurethane film Adhesive Single lap joints
  Article
  

  Morfini, I.; Goglio, L.; Belingardi, G.; Nassar, S. A.
  INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
  Elsevier Ltd
  Vol.92 pp.7 (pp.37-43) ISSN:0143-7496 DOI:10.1016/j.ijadhadh.2019.03.015

• Fiber laser-MAG hybrid welding of DP/AISI 316 and TWIP/AISI 316 dissimilar weld
  Proceeding
  

  Casalino, G.; Angelastro, A.; Perulli, P.; Posa, P.; Spena, P. R.; RUSSO SPENA, Pasquale
  PROCEDIA CIRP
  In: Procedia CIRP
  Elsevier B.V.
  12th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2018 (ita) 2018
  Vol.79 pp.6 (pp.153-158) ISSN:2212-8271 DOI:10.1016/j.procir.2019.02.035

• Friction stir welding of aluminum alloys and steels: Issues and solutions
  Book chapter
  

  Safeen, MIAN WASIF; Spena, P. R.; RUSSO SPENA, Pasquale
  THE MINERALS, METALS & MATERIALS SERIES
  Characterization of Minerals, Metals, and Materials 2019
  Springer International Publishing
  pp.12 (pp.189-200) ISSN:2367-1181 ISBN:9783030057480 DOI:10.1007/978-3-030-05749-7_20

• Hybrid laser arc welding of dissimilar TWIP and DP high strength steel weld
  Article
  

  Russo Spena, P.; Angelastro, A.; Casalino, Giuseppe
  JOURNAL OF MANUFACTURING PROCESSES
  Elsevier Ltd
  Vol.39 pp.8 (pp.233-240) ISSN:1526-6125 DOI:10.1016/j.jmapro.2019.02.025

• Axiomatic design guidelines for the design of flexible and agile manufacturing and assembly systems for SMEs
  Article
  

  Rauch, E.; Russo Spena, P.; Matt, D. T.
  INTERNATIONAL JOURNAL ON INTERACTIVE DESIGN AND MANUFACTURING
  Springer-Verlag France
  Vol.13 pp.22 (pp.1-22) ISSN:1955-2513 DOI:10.1007/s12008-018-0460-1

• Local formability and strength of TWIP-TRIP weldments for stamping tailor welded blanks (TWBs)
  Article
  

  Russo Spena, P.; Cortese, L.; Nalli, F.; Majlinger, K.
  INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY
  Springer London
  Vol.101 pp.15 (pp.757-771) ISSN:0268-3768 DOI:10.1007/s00170-018-2946-1

• Main issues in quality of friction stir welding joints of aluminum alloy and steel sheets
  Article
  

  Safeen, M. W.; Spena, P. R.
  METALS
  MDPI AG
  Vol.9 pp.22 ISSN:2075-4701 DOI:10.3390/met9050610

• Configuration of a production-integrated AVS/RS through discrete event simulation
  Proceeding
  

  Bruno, Giulia; Traini, Emiliano; Chiabert, Paolo; Lombardi, Franco
  In: Titolo volume non avvalorato
  Associazione Italiana Tecnologie Manifatturiere (ITALIA)
  XIV Convegno dell’Associazione Italiana Tecnologie Manifatturiere (Padova (IT)) 09-11 Settembre 2019
  pp.10

• Temperature dependence of material behaviour at high strain-rate Proceedings of 24th DYMAT Technical Meeting 9-11 September 2019, Stresa (Italy)
  Edited by
  

  Scapin, Martina; Peroni, Lorenzo
  Politecnico di Torino (ITALIA)
  pp.160 (pp.1-160) ISBN:9788885745278

• Valutazione della distribuzione delle pressioni generate da strumenti endodontici rotanti in nichel titanio sulle pareti canalari attraverso l'analisi agli elementi finiti
  Proceeding
  

  Umberto, Gibello; Scattina, Alessandro; Paolino, DAVIDE SALVATORE; Chiandussi, Giorgio; Giorgia, Carpegna
  In: Moderna Endodonzia tra tecnologia ed esperienza
  www.endodonzia.it
  Moderna Endodonzia tra tecnologia ed esperienza (Bologna) 7-9 Novembre
  

• Antibacterial, highly hydrophobic and semi transparent Ag/plasma polymer nanocomposite coating on cotton fabric obtained by plasma based co-deposition
  Article
  

  Irfan, M.; Polonskyi, O.; Hinz, A.; Mollea, C.; Bosco, F.; Strunskus, T.; Balagna, C.; Perero, S.; Faupel, F.; Ferraris, M.
  CELLULOSE
  Springer
  pp.18 ISSN:0969-0239 DOI:10.1007/s10570-019-02685-6

• Glass-ceramic oxidation protective coatings for manganese- and magnesium-based thermoelectric silicides
  Proceeding
  

  D’Isanto, F.; Salvo, M.; Smeacetto, F.; Gucci, F.; Chen, K.; Reece, M.
  In: 43rd International Conference & Exposition on Advanced Ceramics and Composites -- ABSTRACT BOOK
  The American Ceramic Society
  43rd International Conference & Exposition on Advanced Ceramics and Composites (Daytona, Florida (USA)) 27 gennaio – 1 Febbraio , 2019
  Vol.UNICO pp.1

• Surface pre-treatments to improve joint strength of ceramics
  Proceeding
  

  Salvo, M.; Casalegno, V.; Ferraris, M.; Wilhelmi, C.; Suess, M.
  In: 43rd International Conference & Exposition on Advanced Ceramics and Composites -- ABSTRACT BOOK
  The American Ceramic Society (STATI UNITI D'AMERICA)
  43rd International Conference & Exposition on Advanced Ceramics and Composites (Daytona Beach, Florida) 27 gennaio – February 1, 2019
  Vol.unico pp.1

• Surface pre-treatments to improve joint strength of ceramics
  Proceeding
  

  Salvo, Milena; Casalegno, Valentina; Ferraris, Monica; Suess, Manuela; Wilhelmi, Christian; Pedroni, Matteo; Vassallo, Espedito
  In: XXIV AIV 2019 conference proceedings abstracts
  AIV
  XXIV AIV 2019 - Materials, Interfaces, Processes in Industrial and Basic Research Applications (Giadini Naxos) 7-10 maggio 2019
  Vol.unico pp.1

• Antipathogen nanostructured coating for air filters
  Proceeding
  

  Balagna, C.; Perero, S.; Irfan, M.; Bosco, F.; Mollea, C.; Ferraris, M.
  In: Abstract Book
  Elsevier B.V.
  3rd International Conference on Applied Surface Science (ICASS 2019) (Pisa (Italy)) 17-20 giugno2019
  pp.2

• Co-sputtered nanostructured antibacterial coating on air filters
  Proceeding
  

  Balagna, Cristina; Perero, Sergio; Bosco, Francesca; Mollea, Chiara; Irfan, Muhammad; Ferraris, Monica
  In: Conference Proceedings ABSTRACTS
  AIV Associazione italiana di Scienza e Tecnologia (ITALIA)
  AIV, XXIV Conference (Giardini Naxos (Italy)) 7-10 Maggio 2019
  pp.2 (pp.7-8)

• Surface Activation and Characterization of Aluminum Alloys for Brazing Optimization
  Article
  

  Ferraris, Sara; Perero, Sergio; Ubertalli, Graziano
  COATINGS
  MDPI
  Vol.9 pp.14 ISSN:2079-6412 DOI:10.3390/coatings9070459

• Assessment of residual elastic properties of a damaged composite plate with combined damage index and finite element methods
  Article
  

  Boursier Niutta, C.; Tridello, A.; Ciardiello, R.; Belingardi, G.; Paolino, D. S.
  APPLIED SCIENCES
  MDPI AG
  Vol.9 pp.14 (pp.1-14) ISSN:2076-3417 DOI:10.3390/app9122579

• Antibacterial nanostructured composite coating on high performance Vectran™ fabric for aerospace structures
  Article
  

  Balagna, C.; Irfan, M.; Perero, S.; Miola, M.; Maina, G.; Crosera, M.; Santella, D.; Simone, A.; Ferraris, M.
  SURFACE & COATINGS TECHNOLOGY
  Elsevier B.V.
  Vol.373 pp.9 (pp.47-55) ISSN:0257-8972 DOI:10.1016/j.surfcoat.2019.05.076

• VHCF response of Gaussian SLM AlSi10Mg specimens: Effect of a stress relief heat treatment
  Article
  

  Tridello, A.; Fiocchi, J.; Biffi, C. A.; Chiandussi, G.; Rossetto, M.; Tuissi, A.; Paolino, D. S.
  INTERNATIONAL JOURNAL OF FATIGUE
  Elsevier Ltd
  Vol.124 pp.9 (pp.435-443) ISSN:0142-1123 DOI:10.1016/j.ijfatigue.2019.02.020

• An innovative testing technique for assessing the VHCF response of adhesively bonded joints
  Article
  

  Tridello, A.; Paolino, D. S.; Chiandussi, G.; Goglio, L.
  FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
  Wiley
  Vol.42 pp.13 (pp.84-96) ISSN:8756-758X DOI:10.1111/ffe.12874

• Effect of electric load and dual atmosphere on the properties of an alkali containing diopside-based glass sealant for solid oxide cells
  Article
  

  Sabato, A. G.; Rost, A.; Schilm, J.; Kusnezoff, M.; Salvo, M.; Chrysanthou, A.; Smeacetto, F.
  JOURNAL OF POWER SOURCES
  Elsevier B.V.
  Vol.415 pp.10 (pp.15-24) ISSN:0378-7753 DOI:10.1016/j.jpowsour.2019.01.051

• Orthoenstatite to forsterite phase transformation in magnesium germanate ceramics
  Article
  

  Viola, Giuseppe; D'Isanto, Fabiana; Koval, Vladimir; Cempura, Grzegorz; Yan, Haixue; Smeacetto, Federico; Salvo, Milena
  CERAMICS INTERNATIONAL
  Elsevier Ltd
  Vol.45 pp.7 (pp.7878-7884) ISSN:0272-8842 DOI:10.1016/j.ceramint.2019.01.098

• Oxidation Protective Hybrid Coating for Thermoelectric Materials
  Article
  

  Gucci, Francesco; D'Isanto, Fabiana; Zhang, Ruizhi; Reece, Michael J; Smeacetto, Federico; Salvo, Milena
  MATERIALS
  MDPI
  Vol.12 pp.11 ISSN:1996-1944 DOI:10.3390/ma12040573

• Physical and mechanical properties of a reversible adhesive for automotive applications
  Article
  

  Ciardiello, R.; Belingardi, G.; Martorana, B.; Brunella, V.
  INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
  Elsevier Ltd
  Vol.89 pp.12 (pp.117-128) ISSN:0143-7496 DOI:10.1016/j.ijadhadh.2018.12.005

• Shear performance at room and high temperatures of glass-ceramic sealants for solid oxide electrolysis cell technology
  Article
  

  Javed, Hassan; Sabato, Antonio Gianfranco; Dlouhy, Ivo; Halasova, Martina; Bernardo, Enrico; Salvo, Milena; Herbrig, Kai; Walter, Christian; Smeacetto, Federico
  MATERIALS
  MDPI AG
  Vol.12 pp.12 ISSN:1996-1944 DOI:10.3390/ma12020298

• “Refractory Metal, RM – Wrap”: A tailorable, pressure-less joining technology
  Article
  

  Gianchandani, Pardeep Kumar; Casalegno, Valentina; Salvo, Milena; Ferraris, Monica; Dlouhý, Ivo
  CERAMICS INTERNATIONAL
  Elsevier Ltd
  Vol.45 pp.11 (pp.4824-4834) ISSN:0272-8842 DOI:10.1016/j.ceramint.2018.11.178

• Optical fiber sensors for the detection of hydrochloric acid and sea water in epoxy and glass fiber-reinforced polymer composites
  Article
  

  Bellot, Cristian Marro; Sangermano, Marco; Olivero, Massimo; Salvo, Milena
  MATERIALS
  MDPI AG
  Vol.12 pp.10 ISSN:1996-1944 DOI:10.3390/ma12030379

• An innovative testing technique for assessing the VHCF response of adhesively bonded joints
  Proceeding
  

  Paolino, DAVIDE SALVATORE; Goglio, Luca; Tridello, Andrea; Chiandussi, Giorgio; Rossetto, Massimo
  In: VHCF7 Seventh International Conference on Very High Cycle Fatigue
  Universität Siegen (GERMANIA)
  VHCF7 Seventh International Conference on Very High Cycle Fatigue (Dresda (Germania)) da 3/07/2017 a 5/07/2017
  Vol.14 pp.6 (pp.340-345) ISBN:9783000569609

• Glass-ceramic oxidation protection of higher manganese silicide thermoelectrics
  Article
  

  Salvo, M.; Smeacetto, F.; D’Isanto, F.; Viola, G.; Demitri, Paola; Gucci, F.; Reece, M. J.
  JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
  Elsevier
  Vol.39 pp.6 (pp.66-71) ISSN:0955-2219 DOI:10.1016/j.jeurceramsoc.2018.01.007

• Automated System for Gluing or Separating Modified Adhesives and Joining or Separating Plastic Materials Through the Use of Nanoparticles Sensitive to Electromagnetic Fields, on an Industrial Scale
  Patent
  

  Ciardiello, Raffaele; Belingardi, Giovanni
  N.IT201800006015A1

• Impact tests
  Book chapter
  

  Goglio, L.
  Handbook of Adhesion Technology: Second Edition
  Springer International Publishing
  Vol.1-2 pp.38 (pp.555-592) ISBN:9783319554105 DOI:10.1007/978-3-319-55411-2_21

• Weldability of TWIP and DP steel dissimilar joint by laser arc hybrid welding with austenitic filler
  Proceeding
  

  Angelastro, A.; Casalino, G.; Perulli, P.; Spena, P. R.; RUSSO SPENA, Pasquale
  PROCEDIA CIRP
  In: Procedia CIRP
  Elsevier B.V.
  11th CIRP International Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2017 (Gulf of Naples, ita) 2017
  Vol.67 pp.5 (pp.607-611) ISSN:2212-8271 DOI:10.1016/j.procir.2018.05.001

• Ultrasonic Very High Cycle Fatigue (VHCF) tests on a cyanoacrylate and on a high strength epoxy adhesive
  Proceeding
  

  Tridello, A.; Paolino, D. S.; Goglio, L.; Chiandussi, G.; Rossetto, M.
  In: Book of abstracts
  www.booki.pt (PORTOGALLO)
  12th European Adhesion Conference and 4th Luso-Brazilian Conference on Adhesion and Adhesives (Lisbona (PT)) 5-7 settembre 2018
  pp.3 (pp.265-267) ISBN:9789898927248

• Dynamic behavior of polyolefin thermoplastic hot melt adhesive under impact loading conditions
  Proceeding
  

  Ciardiello, R.; Tridello, A.; Belingardi, G.; Goglio, L.
  In: Book of abstracts
  www.booki.pt (PORTOGALLO)
  12th European Adhesion Conference and 4th Luso-Brazilian Conference on Adhesion and Adhesives (Lisbona (PT)) 5-7 settembre 2018
  pp.3 (pp.131-133) ISBN:9789898927248

• Experimental analysis and modelling of the strain-rate sensitivity of sheet niobium
  Proceeding
  

  Peroni, Lorenzo; Scapin, Martina
  EPJ WEB OF CONFERENCES
  In: EPJ Web of Conferences
  EDP Sciences
  12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, DYMAT 2018 (Archachon (FR)) 2018
  Vol.183 ISSN:2101-6275 ISBN:9782759890538 DOI:10.1051/epjconf/201818301014

• Strength Model Evaluation Based on Experimental Measurements of Necking Profile in Ductile Metals
  Proceeding
  

  Peroni, Lorenzo; Scapin, Martina
  EPJ WEB OF CONFERENCES
  In: EPJ Web of Conferences
  EDP Sciences
  12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, DYMAT 2018 (Archachon (FR)) 2018
  Vol.183 ISSN:2101-6275 ISBN:9782759890538 DOI:10.1051/epjconf/201818301015

• Solid-Liquid Interdiffusion (SLID) Bonding of p-Type Skutterudite Thermoelectric Material Using Al-Ni Interlayers
  Article
  

  Placha, Katarzyna; Tuley, Richard S.; Salvo, Milena; Casalegno, Valentina; Simpson, Kevin
  MATERIALS
  MDPI
  Vol.11 pp.11 (pp.2483-2493) ISSN:1996-1944 DOI:10.3390/ma11122483

• Composite material components damaged by impact loading: a methodology to assess the residual elastic properties
  Article
  

  Belingardi, G.; Cavatorta, M. P.; Paolino, D. S.
  JOURNAL OF ACHIVEMENTS IN MATERIALS AND MANUFACTURING ENGINEERING
  International OCSCO World Press
  pp.7 (pp.18-24) ISSN:1734-8412 DOI:10.5604/01.3001.0012.0735

• Up-cycling of vitrified bottom ash from MSWI into glass-ceramic foams by means of ‘inorganic gel casting’ and sinter-crystallization
  Article
  

  Rincon Romero, Acacio; Salvo, Milena; Bernardo, Enrico
  CONSTRUCTION AND BUILDING MATERIALS
  Elsevier
  Vol.192 pp.8 (pp.133-140) ISSN:0950-0618 DOI:10.1016/j.conbuildmat.2018.10.135

• CHARACTERIZATION OF DISSIMILAR WELDED JOINTS BETWEEN AUSTENITIC AND DUPLEX STAINLESS STEEL GRADES FOR LIQUID TANK APPLICATIONS
  Proceeding
  

  Ubertalli, G.; Ferraris, M.; Matteis, P.; Di Saverio Politecnico di Torino - Torino, D.; Italy,
  In: MATERIALS & FABRICATION
  ASME Publishing (STATI UNITI D'AMERICA)
  2018 ASME Pressure Vessels & Piping Conference (Prague - Czech Republic) July 15-19, 2018
  pp.9 (pp.1-9)

• VHCF response of Gaussian SLM AlSi10Mg specimens: Effect of stress relieve heat treatment
  Proceeding
  

  Tridello, A.; Biffi, C. A.; Fiocchi, J.; Bassani, P.; Chiandussi, G.; Rossetto, M.; Tuissi, A.; Paolino, D. S.
  In: Proceedings of the 19th International Colloquium on Mechanical Fatigue of Metals
  . Abílio Manuel Pinho DE JESUS, José António Fonseca de Oliveira CORREIA, Ana Maria Azevedo NEVES, Rui Artur Bártolo CALÇADA, António Augusto FERNANDES
  XIX International Colloquium on Mechanical Fatigue of Metals (Porto) 05-07 September 2018
  pp.338 (pp.1-338) ISBN:9789727522378

• VHCF response of as-built SLM AlSi10Mg specimens with large loaded volume
  Article
  

  Tridello, A.; Biffi, C. A.; Fiocchi, J.; Bassani, P.; Chiandussi, G.; Rossetto, M.; Ausonio, Tuissi; Paolino, D. S.
  FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
  Wiley
  Vol.41 pp.11 (pp.1918-1928) ISSN:8756-758X DOI:10.1111/ffe.12830

• Towards self-diagnosis composites: Detection of moisture diffusion through epoxy by embedded evanescent wave optical fibre sensors
  Article
  

  Marro Bellot, Cristian; Olivero, Massimo; Sangermano, Marco; Salvo, Milena
  POLYMER TESTING
  Elsevier
  Vol.71 pp.7 (pp.248-254) ISSN:0142-9418 DOI:10.1016/j.polymertesting.2018.09.019

• Debonding of adhesive joints by means of microwave and induction heating processes
  Proceeding
  

  Ciardiello, R.; Litterio, F.; Belingardi, G.; Martorana, B.; Zanetti, M.; Brunella, V.
  In: "Titolo volume non avvalorato"
  Euradh
  EURADH 2018 and CLBA 2018 (Lisbona) Settembre 2018
  

• Dynamic behaviour of polyolefin thermoplastic hot melt adhesive under impact loading conditions
  Proceeding
  

  Ciardiello, R.; Tridello, A.; Belingardi, G.; Goglio, L.
  In: "Titolo volume non avvalorato"
  EURADH (PORTOGALLO)
  EURADH 2018 and CLBA 2018 (Lisbona) settembre 2018
  

• EXPERIMENTAL ASSESSMENT OF THE DYNAMIC BEHAVIOR OF POLYOLEFIN THERMOPLASTIC HOT MELT ADHESIVE
  Proceeding
  

  Ciardiello, Raffaele; Tridello, Andrea; Goglio, Luca; Belingardi, Giovanni
  In: Proceedings of the ASME 2018 Pressure Vessels and Piping Conference
  ASME (STATI UNITI D'AMERICA)
  Pressure Vessels and Piping Conference PVP2018 Luglio 2018
  Vol.PVP2018 pp.7 DOI:10.1115/PVP2018-84725

• EXPERIMENTAL AND NUMERICAL ANALYSIS OF A PRISTINE AND A NANO-MODIFIED THERMOPLASTIC ADHESIVE
  Proceeding
  

  BOURSIER NIUTTA, Carlo; Ciardiello, Raffaele; Belingardi, Giovanni; Scattina, Alessandro
  In: Proceedings of the ASME 2018 Pressure Vessels and Piping Conference
  ASME
  Pressure Vessels and Piping Conference PVP2018 (Praga) Luglio 2018
  Vol.PVP2018 pp.8 DOI:10.1115/PVP2018-84728

• Brazing of Mo to Glidcop Dispersion Strengthened Copper for Accelerating Structures
  Article
  

  Casalegno, Valentina; Perero, Sergio; Ferraris, Monica; Taborelli, Mauro; Arnau Izquierdo, Gonzalo; Sgobba, Stefano; Salvo, Milena
  MATERIALS
  MDPI
  Vol.11 pp.13 (pp.1658-1670) ISSN:1996-1944

• Joining of aluminium alloy sheets to aluminium alloy foam using metal glasses
  Article
  

  Bangash, MUHAMMAD KASHIF; Ubertalli, Graziano; DI SAVERIO, Davide; Ferraris, Monica; Jitai, Niu
  METALS
  MDPI AG
  Vol.8 pp.14 ISSN:2075-4701 DOI:10.3390/met8080614

• Mechanical and thermal characterization of an epoxy foam as thermal layer insulation for a glass fiber reinforced polymer
  Article
  

  Cavasin, M.; Giannis, S.; Salvo, M.; Casalegno, V.; Sangermano, M.
  JOURNAL OF APPLIED POLYMER SCIENCE
  Wiley
  pp.7 ISSN:0021-8995 DOI:10.1002/app.46864

• Sputtered coatings for antimicrobial applications: from the scientific research to the potential industrial upscale
  Proceeding
  

  Balagna, C.; Perero, S.; Miola, M.; Ferraris, S.; Baino, F.; Verné, E.; Irfan, Muhammad; Ferraris, M.
  In: Book of Abstracts of the Workshop “Starting Technologies”
  Congress press
  AIMAT 2018 (Ischia (Italy)) 10-13 June, 2018
  pp.1

• Passivity and its breakdown on low temperature plasma carburized AISI 204Cu stainless steel in chloride-containing solution
  Article
  

  Rosalbino, Francesco; Scavino, Giorgio; Ubertalli, Graziano
  MATERIALS AND CORROSION
  Wiley-VCH
  Vol.69 pp.9 (pp.563-571) ISSN:0947-5117 DOI:10.1002/maco.201709888

• OPTICAL SENSOR, PROCESS FOR MAKING SUCH SENSOR AND EVALUATION SYSTEM COMPRISING AT LEAST ONE OF SUCH SENSORS
  Patent
  

  Salvo, Milena; Sangermano, Marco; MARRO BELLOT, Cristian; Olivero, Massimo
  N.2018WO-IT00059

• Antibacterial glasses for prosthetic devices and healthcare-associated infections
  Proceeding
  

  Verné, E.; Baino, F.; Balagna, C.; Cazzola, M.; Ferraris, S.; Miola, M.; Perero, S.; Spriano, S.; Ferraris, M.
  In: Book of Abstracts
  HVG-DGG (GERMANIA)
  Joint Meeting of DGG, ČSS & SSS (Bayreuth (Germany)) 28-30 May, 2018
  pp.1

• Functionalization of adhesives and composite matrix by micro and nanoparticle addition
  Doctoral thesis
  

  Ciardiello, Raffaele
  Politecnico di Torino
  pp.202

• Laser surface nanostructuring for reliable Si3N4/Si3N4and Si3N4/Invar joined components
  Article
  

  Salvo, Milena; Casalegno, Valentina; Suess, Manuela; Gozzelino, Laura; Wilhelmi, Christian
  CERAMICS INTERNATIONAL
  Elsevier Ltd
  Vol.44 pp.7 (pp.12081-12087) ISSN:0272-8842 DOI:10.1016/j.ceramint.2018.03.226

• SiC foam sandwich structures obtained by Mo-wrap joining
  Article
  

  Gianchandani, Pardeep Kumar; Casalegno, Valentina; Salvo, Milena; Bianchi, Giovanni; Ortona, Alberto; Ferraris, Monica
  MATERIALS LETTERS
  Elsevier B.V.
  Vol.221 pp.4 (pp.240-243) ISSN:0167-577X DOI:10.1016/j.matlet.2018.03.105

• Design and characterization of novel glass-ceramic sealants for solid oxide electrolysis cell (SOEC) applications
  Article
  

  Javed, Hassan; Sabato, Antonio Gianfranco; Herbrig, Kai; Ferrero, Domenico; Walter, Christian; Salvo, Milena; Smeacetto, Federico
  INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY
  Blackwell Publishing Ltd
  Vol.15 pp.12 (pp.999-1010) ISSN:1546-542X DOI:10.1111/ijac.12889

• Analytical models for the evaluation of deep-lane autonomous vehicle storage and retrieval system performance
  Article
  

  D’Antonio, Gianluca; Maddis, Manuela De; Bedolla, Joel Sauza; Chiabert, Paolo; Lombardi, Franco
  INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY
  Springer London
  Vol.94 pp.14 (pp.1811-1824) ISSN:0268-3768 DOI:10.1007/s00170-017-0313-2

• Nanostructured antibacterial coatings obtained by co-sputtering of silver and silica
  Proceeding
  

  Ferraris, M.; Baino, F.; Balagna, C.; Ferraris, S.; Irfan, M.; Miola, M.; Perero, S.; Verné, E.; Spriano, S.
  In: Book of Abstracts
  American Ceramic Society (STATI UNITI D'AMERICA)
  42nd International conference and Expo on Advanced Ceramics and Composites (ICACC 2018) - 12th International Symposium on Functional Nanomaterials and Thin Films for Sustainable Energy Harvesting, Environmental and Health Applications (Daytona Beach (FL, USA)) 21-26 Gennaio, 2018
  pp.1

• CaO-Al 2 O 3 glass-ceramic as a joining material for SiC based components: A microstructural study of the effect of Si-ion irradiation
  Article
  

  Casalegno, Valentina; Kondo, Sosuke; Hinoki, Tatsuya; Salvo, Milena; Czyrska-Filemonowicz, Aleksandra; Moskalewicz, Tomasz; Katoh, Yutai; Ferraris, Monica
  JOURNAL OF NUCLEAR MATERIALS
  Elsevier
  Vol.501 pp.9 (pp.172-180) ISSN:0022-3115 DOI:10.1016/j.jnucmat.2018.01.033

• Thermal shock performance of Sandwich structures obtained by “Mo-Wrap”
  Proceeding
  

  Gianchandani, PARDEEP KUMAR; Casalegno, Valentina.; Salvo, Milena.; Ferraris, Monica.; Bianchi, Giovanni; Ortona, Alberto
  In: International Conference & Exposition on Advanced Ceramics & Composites
  American Ceramic Society
  42nd International Conference & Exposition on Advanced Ceramics & Composites
  

• "Re-wrap” method (Refractory metals Re= Mo, Nb, Ta and W) for joining of ceramics and CMC
  Proceeding
  

  Gianchandani, PARDEEP KUMAR; Casalegno, Valentina; Salvo, Milena; Ferraris, Monica
  In: International Conference & Exposition on Advanced Ceramics & Composites
  American Ceramic Society
  42nd International Conference & Exposition on Advanced Ceramics & Composites
  

• Joining of carbon fibre reinforced polymer to Al-Si alloy for space applications
  Article
  

  Casalegno, Valentina; Salvo, Milena; Rizzo, Stefano; Goglio, Luca; Damiano, Olivier; Ferraris, Monica
  INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
  Elsevier
  Vol.82 pp.7 (pp.146-152) ISSN:0143-7496 DOI:10.1016/j.ijadhadh.2018.01.009

• In-situ TiC particle reinforced TiCuZrNi brazing alloy for joining C/C composites to Ti6Al4V
  Article
  

  Song, Xinrui; Li, Hejun; Casalegno, Valentina; Salvo, Milena; Ferraris, Monica; Zeng, Xierong
  INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY
  Wiley
  Vol.15 pp.8 (pp.611-618) ISSN:1546-542X DOI:10.1111/ijac.12863

• Interface stability between bare, Mn-Co spinel coated AISI 441 stainless steel and a diopside-based glass-ceramic sealant
  Article
  

  Sabato, ANTONIO GIANFRANCO; Chrysanthou, Andreas; Salvo, Milena; Cempura, Grzegorz; Smeacetto, Federico
  INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
  Elsevier
  Vol.43 pp.11 (pp.1824-1834) ISSN:0360-3199 DOI:10.1016/j.ijhydene.2017.11.150

• RAPID EVALUATION OF NOTCH STRESS INTENSITY FACTORS USING THE PEAK STRESS METHOD: COMPARISON OF COMMERCIAL FINITE ELEMENT CODES FOR A RANGE OF MESH PATTERNS
  Article
  

  Meneghetti, G.; Campagnolo, A.; Avalle, M.; Castagnetti, D.; Colussi, M.; Corigliano, P.; De Agostinis, M.; Dragoni3, E.; Fontanari, V.; Frendo, F.; Goglio, L.; Marannano, G.; Marulo, G.; Moroni1, F.; Pantano, A.; Rebora, A.; Scattina, A.; Spaggiari, A.; Zuccarello, B.
  FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
  John Wiley & Sons Ltd
  Vol.41 pp.20 (pp.1044-1063) ISSN:1460-2695 DOI:10.1111/ffe.12751

• Joining and testing of alumina fibre reinforced YAG-ZrO2matrix composites
  Article
  

  Akram, MUHAMMAD YASIR; Ferraris, Monica; Casalegno, Valentina; Salvo, Milena; Puchas, Georg; Knohl, Stefan; Krenkel, Walter
  JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
  Elsevier Ltd
  Vol.38 pp.10 (pp.1802-1811) ISSN:0955-2219 DOI:10.1016/j.jeurceramsoc.2017.11.026

• Estimation of P-S-N curves in very-high-cycle fatigue: Statistical procedure based on a general crack growth rate model
  Article
  

  Paolino, Davide Salvatore; Tridello, Andrea; Chiandussi, Giorgio; Rossetto, Massimo
  FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
  Blackwell Publishing Ltd
  Vol.41 pp.9 (pp.718-726) ISSN:8756-758X DOI:10.1111/ffe.12715

• Effect of thickness on the damage tolerance of glass/epoxy laminates subject to repeated impacts
  Article
  

  Paolino, Davide Salvatore; Cavatorta, Maria Pia; Belingardi, Giovanni
  PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART C, JOURNAL OF MECHANICAL ENGINEERING SCIENCE
  SAGE
  Vol.232 pp.11 (pp.1363-1373) ISSN:0954-4062 DOI:10.1177/0954406217737582

• Iron-based reversible adhesives: Effect of particles size on mechanical properties
  Article
  

  Ciardiello, Raffaele; Martorana, B; Lambertini, Vg; Brunella, V.
  PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART C, JOURNAL OF MECHANICAL ENGINEERING SCIENCE
  SAGE
  Vol.232 pp.10 (pp.1446-1455) ISSN:0954-4062 DOI:10.1177/0954406217736552

• Impact response of adhesive reversible joints made of thermoplastic nanomodified adhesive
  Article
  

  Ciardiello, Raffaele; Tridello, Andrea; Brunella, V.; Martorana, B.; Paolino, Davide Salvatore; Belingardi, Giovanni
  JOURNAL OF ADHESION
  Taylor & Francis
  pp.30 ISSN:0021-8464 DOI:10.1080/00218464.2017.1354763

• CO2 laser cutting of hot stamping boron steel sheets
  Article
  

  Russo Spena, Pasquale
  METALS
  MDPI AG
  Vol.7 pp.18 ISSN:2075-4701 DOI:10.3390/met7110456

• PROCEDIMENTO PER L’APPLICAZIONE DI UN RIVESTIMENTO ANTIVIRALE AD UN SUBSTRATO E RELATIVO RIVESTIMENTO
  Patent
  

  Balagna, Cristina; Ferraris, Monica; Perero, Sergio
  N.WO2019082001A1

• Evaluation of dynamic fracture toughness in ductile steel by means of a split Hopkinson pressure bar 3PB technique
  Article
  

  Peroni, L.; Scapin, M.; Cristea, M. E.; Gallina, D.
  PROCEDIA ENGINEERING
  Elsevier
  Vol.197 pp.10 (pp.148-157) ISSN:1877-7058 DOI:10.1016/j.proeng.2017.08.091

• A thermoelectric module
  Patent
  

  Tuley, Richard; Salvo, Milena; Placha, Katarzyna; Simpson, Kevin
  N.EP17425075.3

• Evaluation of Hot Tearing in Large Mottled Iron Rolls by Microstructural and FEM Casting Analyses
  Article
  

  Russo Spena, Pasquale; De Maddis, Manuela; Lombardi, Franco
  STEEL RESEARCH INTERNATIONAL
  Wiley-VCH Verlag
  Vol.88 pp.13 ISSN:1611-3683 DOI:10.1002/srin.201600391

• Ultrasonic VHCF tests on AISI H13 steel with two different inclusion content: assessment of size effects with Gaussian specimens
  Proceeding
  

  Tridello, Andrea; Paolino, DAVIDE SALVATORE; Chiandussi, Giorgio; Rossetto, Massimo
  In: VHCF7 Seventh International Conference on Very High Cycle Fatigue
  Universität Siegen (GERMANIA)
  VHCF7 Seventh International Conference on Very High Cycle Fatigue (Dresda (Germania)) da 3/07/2017 a 5/07/2017
  Vol.14 pp.6 (pp.401-406) ISBN:9783000569609

• A general statistical model for the description of the hydrogen assisted crack initiation in the VHCF regime
  Proceeding
  

  Paolino, DAVIDE SALVATORE; Tridello, Andrea; Chiandussi, Giorgio; Rossetto, Massimo
  In: VHCF7 Seventh International Conference on Very High Cycle Fatigue
  Universität Siegen (GERMANIA)
  VHCF7 Seventh International Conference on Very High Cycle Fatigue (Dresda (Germania)) da 3/07/2017 a 5/07/2017
  Vol.14 pp.6 (pp.75-80) ISBN:9783000569609

• Effect of defect size on P-S-N curves in Very-High-Cycle Fatigue
  Article
  

  Paolino, Davide S.; Tridello, Andrea; Chiandussi, Giorgio; Rossetto, Massimo
  PROCEDIA STRUCTURAL INTEGRITY
  Elsevier
  Vol.7 pp.8 (pp.335-342) ISSN:2452-3216 DOI:10.1016/j.prostr.2017.11.097

• Microstructure and preliminary fatigue analysis on AlSi10Mg samples manufactured by SLM
  Article
  

  Biffi, C. A.; Fiocchi, J.; Bassani, P.; Paolino, D. S.; Tridello, A.; Chiandussi, G.; Rossetto, M.; Tuissi, A.
  PROCEDIA STRUCTURAL INTEGRITY
  Elsevier
  Vol.7 pp.8 (pp.50-57) ISSN:2452-3216 DOI:10.1016/j.prostr.2017.11.060

• Non-destructive evaluation of residual elastic properties in composite components after impact
  Proceeding
  

  Belingardi, G.; Cavatorta, M; Paolino, D.
  In: PROGRAMME AND PROCEEDINGS of the International Scientific Congress AMME 2017
  International OCSCO World Press (POLONIA)
  Silver Jubilee International Scientific Conference on Achievements in Mechanical and Materials Engineering AMME'2017 (WISŁA - Poland) 22-25 October 2017
  pp.2 (pp.73-74)

• Design and virtual validation of the most updated Technologies in endodontics
  Proceeding
  

  Chiandussi, Giorgio; Paolino, DAVIDE SALVATORE; Berutti, Elio; Pasqualini, Damiano
  In: 29th International Congress of the Society for Medical Innovation and Technology: Abstracts
  ???
  29th International Congress of the Society for Medical Innovation and Technology (Torino) 9-10 Novembre 2017
  

• Effect of electroslag remelting on the VHCF response of an AISI H13 steel
  Article
  

  Tridello, Andrea; Paolino, Davide Salvatore; Chiandussi, Giorgio; Rossetto, Massimo
  FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
  Blackwell Publishing Ltd
  Vol.40 pp.12 (pp.1783-1794) ISSN:8756-758X DOI:10.1111/ffe.12696

• Crack growth from internal defects and related size-effect in VHCF
  Article
  

  Paolino, Davide Salvatore; Tridello, Andrea; Chiandussi, Giorgio; Rossetto, Massimo
  PROCEDIA STRUCTURAL INTEGRITY
  Elsevier
  Vol.5 pp.8 (pp.247-254) ISSN:2452-3216 DOI:10.1016/j.prostr.2017.07.124

• Antibacterial nanostructured coatings obtained by co-sputtering of silver and silica
  Proceeding
  

  Baino, Francesco; Balagna, Cristina; Ferraris, Sara; Miola, Marta; Perero, Sergio; Verne', Enrica; Ferraris, Monica
  In: Conference Book of the International Conference “Tissue Regeneration: Advanced Ceramics and Composites – TRACE”
  Università degli Studi di Genova (ITALIA)
  International Conference “Tissue Regeneration: Advanced Ceramics and Composites – TRACE” (Genova) 19-20 Settembre, 2017
  pp.1

• Microstructural and electrical characterization of Mn-Co spinel protective coatings for solid oxide cell interconnects
  Article
  

  Molin, S.; Sabato, ANTONIO GIANFRANCO; Bindi, M.; Leone, Pierluigi; Cempura, G.; Salvo, M.; Cabanas Polo, S.; Boccaccini, A. R.; Smeacetto, Federico
  JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
  Elsevier Ltd
  Vol.37 pp.11 (pp.4781-4791) ISSN:0955-2219 DOI:10.1016/j.jeurceramsoc.2017.07.011

• Torsion tests on SiC/SiC joined by “Mo-wrap” method
  Proceeding
  

  Gianchandani, PARDEEP KUMAR; DE LA PIERRE DES AMBROIS, Stefano; Casalegno, Valentina; Salvo, Milena; Ferraris, Monica
  In: International Conference & Exposition on Advanced Ceramics & Composites
  American Ceramic Society
  41st International Conference & Exposition on Advanced Ceramics & Composites
  

• SENSORE OTTICO E PROCEDIMENTO DI REALIZZAZIONE DI UN TALE SENSORE
  Patent
  

  Salvo, Milena; Sangermano, Marco; MARRO BELLOT, Cristian; Olivero, Massimo
  N.numero domanda 102017000053268

• Antibacterial and Bioactive Coatings Based on Radio Frequency Co-Sputtering of Silver Nanocluster-Silica Coatings on PEEK/Bioactive Glass Layers Obtained by Electrophoretic Deposition
  Article
  

  Ur Rehman, Muhammad Atiq; Ferraris, Sara; Goldmann, Wolfgang; Perero, Sergio; Bastan, Fatih Erdem; Nawaz, Qaisar; Gautier di Confiengo, G.; Ferraris, Monica; Boccaccini, Aldo R.
  ACS APPLIED MATERIALS & INTERFACES
  ACS Publications
  Vol.9 pp.9 (pp.32489-32497) ISSN:1944-8244 DOI:10.1021/acsami.7b08646

• Numerical Computation of Stress Intensity Factors in Ultrasonic Very-High-Cycle Fatigue Tests
  Proceeding
  

  HASANI NAJAFABADI, SEYED HUSEIN; Zucca, Stefano; Paolino, Davide Salvatore; Chiandussi, Giorgio; Rossetto, Massimo
  In: No title
  Trans Tech Publications Inc. (IRAN)
  16th International Conference on Fracture and Damage Mechanics, FDM 2016
  Vol.754 pp.4 (pp.218-221) DOI:10.4028/www.scientific.net/KEM.754.218

• Numerical Computation of Stress Intensity Factors in Ultrasonic Very-High-Cycle Fatigue Tests
  Proceeding
  

  S. H., Hasani Najafabadi; Zucca, Stefano; D. S., Paolino; Chiandussi, Giorgio; Rossetto, Massimo
  KEY ENGINEERING MATERIALS
  In: Volume 754 KEM
  Trans Tech Publications Inc.
  16th International Conference on Fracture and Damage Mechanics (Firenze) 18-20 luglio 2017
  Vol.754 pp.4 (pp.218-221) ISSN:1662-9795 DOI:10.4028/www.scientific.net/KEM.754.218

• The effect of processing conditions on phase and microstructure of CaGeO3 ceramics
  Article
  

  Viola, Giuseppe; D'Isanto, Fabiana; Mahmoud, Abd El razek; Reece, Michael John; Cempura, Grzegorz; Smeacetto, Federico; Salvo, Milena
  CERAMICS INTERNATIONAL
  Elsevier Ltd
  Vol.43 pp.9 (pp.12035-12043) ISSN:0272-8842 DOI:10.1016/j.ceramint.2017.06.056

• Improvement of the water-vapor barrier properties of an uv-cured epoxy coating containing graphite oxide nanoplatelets
  Article
  

  Sangermano, Marco; Periolatto, Monica; Signore, V.; RUSSO SPENA, Pasquale
  PROGRESS IN ORGANIC COATINGS
  Elsevier B.V.
  Vol.103 pp.4 (pp.152-155) ISSN:0300-9440 DOI:10.1016/j.porgcoat.2016.10.032

• Effects of carbon black and graphene nano-platelet fillers on the mechanical properties of syntactic foam
  Article
  

  Ciardiello, Raffaele; Drzal, L. T.; Belingardi, Giovanni
  COMPOSITE STRUCTURES
  Professor Ferreira
  pp.20 ISSN:0263-8223 DOI:10.1016/j.compstruct.2017.07.057

• Forming Simulations of Niobium Sheets - Upgrade of the Numerical Model and Outcome for Novel Productions
  Proceeding
  

  Amorim Carvalho, A; Brachet, J; Bulat, B; Capatina, O; Dallocchio, A; Garlaschè, M; Narduzzi, M; Peroni, Lorenzo; Prever Loiri, L; Scapin, M.
  In: 11th European LS-DYNA Conference
  -
  European LS-DYNA Conference (Salisburgo (Austria)) 9-11 Maggio 2017
  pp.8 (pp.1-8)

• Damaged composite laminates Assessment of residual Young's modulus through the Impulse Excitation Techniq
  Article
  

  Paolino, Davide Salvatore; Geng, Hanze; Scattina, Alessandro; Tridello, Andrea; Cavatorta, Maria Pia; Belingardi, Giovanni
  COMPOSITES. PART B, ENGINEERING
  Elsevier
  Vol.128 pp.7 (pp.76-82) ISSN:1359-8368 DOI:10.1016/j.compositesb.2017.07.008

• Characterization of antibacterial silver nanocluster/silica composite coating on high performance Kevlar® textile
  Article
  

  Balagna, Cristina; Irfan, Muhammad; Perero, Sergio; Miola, Marta; Maina, Giovanni; Santella, Daniela; Simone, Antonia
  SURFACE & COATINGS TECHNOLOGY
  Elsevier BV
  Vol.321 pp.10 (pp.438-447) ISSN:0257-8972 DOI:10.1016/j.surfcoat.2017.05.009

• A general model for crack growth from initial defect in Very-High-Cycle Fatigue
  Article
  

  Paolino, Davide Salvatore; Tridello, Andrea; Chiandussi, Giorgio; Rossetto, Massimo
  PROCEDIA STRUCTURAL INTEGRITY
  Elsevier
  Vol.3 pp.13 (pp.411-423) ISSN:2452-3216 DOI:10.1016/j.prostr.2017.04.069

• Micro-CT evaluation of several glide path techniques and ProTaper Next shaping outcomes in maxillary first molar curved canals
  Article
  

  Alovisi, M.; Cemenasco, A.; Mancini, L.; Paolino, Davide Salvatore; Scotti, N.; Bianchi, C. C.; Pasqualini, D.
  INTERNATIONAL ENDODONTIC JOURNAL
  Blackwell Publishing Ltd
  Vol.50 pp.11 (pp.387-397) ISSN:0143-2885 DOI:10.1111/iej.12628

• Glass-ceramic joining material for sodium-based battery
  Article
  

  Smeacetto, Federico; Radaelli, M.; Salvo, Milena; Di Modugno, D.; Sabato, ANTONIO GIANFRANCO; Casalegno, Valentina; Broglia, M.; Ferraris, Monica
  CERAMICS INTERNATIONAL
  Elsevier Ltd
  Vol.43 pp.5 (pp.8329-8333) ISSN:0272-8842 DOI:10.1016/j.ceramint.2017.03.170

• Silver nanocluster/silica composite coatings: a successful strategy to impart antibacterial properties from home to space
  Proceeding
  

  Ferraris, Sara; Baino, Francesco; Balagna, Cristina; Miola, Marta; Perero, Sergio; Verne', Enrica; Ferraris, Monica
  In: Book of Abstracts - AIV XXIII Conference
  AIV
  AIV (Associazione Italiana di Scienza e Tecnologia) XXIII Conference (Firenze) 5-7 Aprile, 2017
  pp.1

• Polypropylene prostheses coated with silver nanoclusters/silica coating obtained by sputtering: Biocompatibility and antibacterial properties
  Article
  

  Muzio, Giuliana; Miola, Marta; Perero, Sergio; Oraldi, Manuela; Maggiora, Marina; Ferraris, Sara; Verne', Enrica; Festa, Valentino; Festa, Federico; Canuto, Rosa Angela; Ferraris, Monica
  SURFACE & COATINGS TECHNOLOGY
  Elsevier B.V.
  Vol.319 pp.9 (pp.326-334) ISSN:0257-8972 DOI:10.1016/j.surfcoat.2017.03.057

• A novel methodology for the assessment of the residual elastic properties in damaged composite components
  Article
  

  Tridello, Andrea; D’Andrea, A.; Paolino, Davide Salvatore; Belingardi, Giovanni
  COMPOSITE STRUCTURES
  Elsevier Science Ldt
  Vol.161 pp.6 (pp.435-440) ISSN:0263-8223 DOI:10.1016/j.compstruct.2016.11.028

• High Strain Rate Tensile and Compressive Testing and Performance of Mesoporous Invar (FeNi36) Matrix Syntactic Foams Produced by Feedstock Extrusion
  Article
  

  Peroni, Lorenzo; Scapin, Martina; Dirk, Lehmhus; Joachim, Baumeister; Matthias, Busse; Avalle, Massimiliano; Joerg, Weise
  ADVANCED ENGINEERING MATERIALS
  WILEY-VCH Verlag GmbH & Co.
  pp.11 ISSN:1438-1656 DOI:10.1002/adem.201600474

• Experimental results and strength model identification of pure iridium
  Article
  

  Scapin, Martina; Peroni, Lorenzo; Claudio, Torregrosa; Antonio, Perillo Marcone; Marco, Calviani; Laura, Gomez Pereira; Floriane, Leaux; Mickael, Meyer
  INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
  Elsevier
  pp.10 ISSN:0734-743X DOI:10.1016/j.ijimpeng.2017.03.019

• Surface engineering of SiCf/SiC composites by selective thermal removal
  Article
  

  Valenza, Fabrizio; Casalegno, Valentina; Gambaro, Sofia; Muolo, Maria Luigia; Passerone, Alberto; Salvo, Milena; Ferraris, Monica
  INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY
  Blackwell Publishing Ltd
  Vol.14 pp.8 (pp.287-294) ISSN:1546-542X DOI:10.1111/ijac.12618

• Effect of pulsed laser irradiation on the SiC surface
  Article
  

  Suess, Manuela; Wilhelmi, Christian; Salvo, Milena; Casalegno, Valentina; Tatarko, Peter; Funke, Matthias
  INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY
  Blackwell Publishing Ltd
  Vol.14 pp.10 (pp.313-322) ISSN:1546-542X DOI:10.1111/ijac.12655

• Antibacterial nanocoatings for ocular applications
  Book chapter
  

  Baino, Francesco; Perero, Sergio; Miola, Marta; Ferraris, Monica
  ADVANCES IN SCIENCE AND TECHNOLOGY
  7th Forum on New Materials - Part F
  Trans Tech Publication (SVIZZERA)
  Vol.102 pp.5 (pp.24-28) ISSN:1662-0356 ISBN:9783035711257 DOI:10.4028/www.scientific.net/AST.102.24

• Antimicrobial functionalization of cotton fabric with silver nanoclusters/silica composite coating via RF co-sputtering technique
  Article
  

  Irfan, Muhammad; Perero, Sergio; Miola, Marta; Maina, Giovanni; Ferri, Ada; Ferraris, Monica; Balagna, Cristina
  CELLULOSE
  Springer
  pp.15 ISSN:0969-0239 DOI:10.1007/s10570-017-1232-y

• Joining of AL-6016 to Al-foam using Zn-based joining materials
  Article
  

  Ubertalli, Graziano; Ferraris, Monica; Bangash, MUHAMMAD KASHIF
  COMPOSITES. PART A: APPLIED SCIENCE AND MANUFACTURING
  Elsevier Ltd
  Vol.96 pp.7 (pp.122-128) ISSN:1359-835X DOI:10.1016/j.compositesa.2017.02.019

• Shear tests on joined materials
  Proceeding
  

  Ferraris, Monica; Goglio, Luca; Salvo, Milena; Smeacetto, Federico; DE LA PIERRE DES AMBROIS, Stefano; Casalegno, Valentina
  In: ABSTRACT BOOK
  The American Ceramic Society (STATI UNITI D'AMERICA)
  41st International Conference and Exposition on Advanced Ceramics and Composites (Daytona Beach (FL-USA)) January 22-27, 2017
  pp.1

• Torsion shear strength of ceramics joined by brittle or ductile materials
  Proceeding
  

  Goglio, Luca
  In: ABSTRACT BOOK
  The American Ceramic Society (STATI UNITI D'AMERICA)
  41st International Conference and Exposition on Advanced Ceramics and Composites (Daytona Beach (FL-USA)) January 22-27, 2017
  pp.1

• Dynamic Brazilian Test for Mechanical Characterization of Ceramic Ballistic Protection
  Article
  

  Scapin, Martina; Peroni, Lorenzo; Avalle, Massimiliano
  SHOCK AND VIBRATION
  Hindawi
  Vol.2017 pp.10 ISSN:1070-9622 DOI:10.1155/2017/7485856

• New glass-ceramic sealants for SOFCs application: characterization and compatibility with interconnects
  Proceeding
  

  Sabato, ANTONIO GIANFRANCO; Salvo, Milena; Smeacetto, Federico; Kusnezoff, Mihalis; Schilm, Jochen; Rost, Axel; Chrysanthou, Andreas; Cempura, Gregorz; Ferraris, Monica
  In: 41st International Conference and Expo on Advanced Ceramics and Composites
  41st International Conference and Expo on Advanced Ceramics and Composites (Daytona Beach, Florida) 22-27 Gennaio 2017
  

• Biocompatibility versus peritoneal mesothelial cells of polypropylene prostheses for hernia repair, coated with a thin silica/silver layer
  Article
  

  Muzio, Giuliana; Perero, Sergio; Miola, Marta; Oraldi, Manuela; Ferraris, Sara; Verne', Enrica; Festa, Federico; Canuto, Rosa Angela; Festa, Valentino; Ferraris, Monica
  JOURNAL OF BIOMEDICAL MATERIALS RESEARCH. PART B, APPLIED BIOMATERIALS.
  John Wiley and Sons Inc.
  pp.8 ISSN:1552-4973 DOI:10.1002/jbm.b.33697

• Antibacterial silver nanocluster/silica composite coatings on stainless steel
  Article
  

  Ferraris, Monica; Perero, Sergio; Ferraris, Sara; Miola, Marta; Verne', Enrica; Skoglund, S.; Blomberg, E.; Odnevall Wallinder, I.
  APPLIED SURFACE SCIENCE
  Elsevier
  Vol.396 pp.10 (pp.1546-1555) ISSN:0169-4332 DOI:10.1016/j.apsusc.2016.11.207

• Smart and composite inorganic coatings obtained by sputtering: A promising solution for numerous application fields
  Book chapter
  

  Ferraris, S.; Perero, S.
  Smart Composite Coatings and Membranes: Transport, Structural, Environmental and Energy Applications
  Elsevier Inc.
  pp.28 (pp.33-60) ISBN:9781782422839 DOI:10.1016/B978-1-78242-283-9.00002-6

• Photocured epoxy/graphene nanocomposites with enhanced water vapor barrier properties
  Proceeding
  

  Periolatto, M.; Sangermano, M.; Spena, P. Russo
  AIP CONFERENCE PROCEEDINGS
  In: AIP Conference Proceedings
  American Institute of Physics Inc.
  8th International Conference on Times of Polymers and Composites: From Aerospace to Nanotechnology (ita) 2016
  pp.4 ISSN:0094-243X ISBN:9780735413900 DOI:10.1063/1.4949619

• Effect of partial crystallization on the thermal, structural and luminescence properties of Er3+-doped phosphate glasses
  Proceeding
  

  Lopez-Iscoa, Pablo; Petit, Laeticia; Massera, Jonathan; Milanese, Daniel; Janner, Davide; Boetti Nadia, G.; Pugliese, Diego; Novara, Chiara; Fiorilli, Sonia; Salvo, Milena; Ferraris, Monica
  In: EMN Meeting - Program and abstracts
  Springer
  EMN Meeting on Photonics 2016 (Barcelona, Spain) September 19-23, 2016
  Vol.Unico pp.2 (pp.26-27)

• Clinical evaluation of near-infrared light transillumination (NIRT) as an interproximal caries detection tool in a large sample of patients in a private practice
  Article
  

  F, Russotto; F, Tirone; S, Salzano; Fc, Borga; Paolino, Davide Salvatore; A, Ferraro; S, Botasso
  JOURNAL OF RADIOLOGY AND IMAGING
  NobleResearch
  Vol.1 pp.5 (pp.1-5) ISSN:2399-8172 DOI:10.14312/2399-8172.2016-1

• ANALISI DEL COMPORTAMENTO POST-NECKING IN METALLI REFRATTARI
  Proceeding
  

  Scapin, Martina; Peroni, Lorenzo; Tridello, Andrea
  In: Atti del Convegno Nazionale Associazione Italiana per l'Analisi delle Sollecitazioni
  AIAS – ASSOCIAZIONE ITALIANA PER L’ANALISI DELLE SOLLECITAZIONI
  45° CONVEGNO NAZIONALE AIAS (Trieste) 7-10 Settembre 2016
  pp.10 (pp.1-10)

• MODELLAZIONE DEL COMPORTAMENTO MECCANICO DELL’IRIDIO PURO IN CONDIZIONI DI SOLLECITAZIONE DINAMICA
  Proceeding
  

  Scapin, Martina; Peroni, Lorenzo; Tridello, Andrea
  In: Atti del Convegno Nazionale Associazione Italiana per l'Analisi delle Sollecitazioni
  AIAS – ASSOCIAZIONE ITALIANA PER L’ANALISI DELLE SOLLECITAZIONI
  45° CONVEGNO NAZIONALE AIAS (Trieste) 7-10 Settembre 2016
  pp.10 (pp.1-10)

• Effects of Process Parameters on Spot Welding of TRIP and Quenching and Partitioning Steels
  Article
  

  RUSSO SPENA, Pasquale; Cortese, Luca; DE MADDIS, Manuela; Lombardi, Franco
  STEEL RESEARCH INTERNATIONAL
  Wiley-VCH Verlag
  Vol.87 pp.9 (pp.1592-1600) ISSN:1611-3683 DOI:10.1002/srin.201600007

• Advanced glasses, Composites And Ceramics for High growth Industries
  Article
  

  Salvo, Milena; Reece, Mike; Ciraldo, Francesca
  IMPACT
  Science Impact Ltd
  Vol.2016 pp.3 (pp.29-31) ISSN:2398-7073 DOI:10.21820/23987073.2016.2.29

• Chapter 5. Continuum Mechanics Modelling by Finite Elements
  Book chapter
  

  Goglio, Luca
  Strength Prediction of Adhesively-Bonded Joints
  CRC Press - Taylor & Francis Group (STATI UNITI D'AMERICA)
  pp.25 (pp.97-121) ISBN:9781498722469 DOI:10.1201/9781315370835-6

• Influence of operator experience on non-carious cervical lesion restorations: Clinical evaluation with different adhesive systems
  Article
  

  Scotti, Nicola; Comba, Allegra; Gambino, Alberto; Manzon, Elena; Breschi, Lorenzo; Paolino, Davide Salvatore; Pasqualini, Damiano; Berutti, Elio
  AMERICAN JOURNAL OF DENTISTRY
  Mosher and Linder, Inc
  Vol.29 pp.6 (pp.33-38) ISSN:0894-8275

• Experimental-Numerical assessment of critical SIF from VHCF tests
  Proceeding
  

  HASANI NAJAFABADI, SEYED HUSEIN; Paolino, Davide Salvatore; Tridello, Andrea; Chiandussi, Giorgio; Rossetto, Massimo
  KEY ENGINEERING MATERIALS
  In: Titolo volume non avvalorato
  Trans Tech Publications Ltd (SVIZZERA)
  15th International Conference on Fracture and Damage Mechanics, FDM 2016 (Alicante) 14-16 September, 2016
  Vol.713 pp.4 (pp.62-65) ISSN:1662-9795 DOI:10.4028/www.scientific.net/KEM.713.62

• A STUDY OF PHYSICAL AND MECHANICAL PROPERTIES OF A NANOMODIFIED THERMOPLASTIC ADHESIVE IN NORMAL AND ACCELERATED AGEING CONDITIONS
  Proceeding
  

  Martorana, B.; Fondacaro, D.; Brunella, V.; Belingardi, Giovanni; Ciardiello, Raffaele
  In: European conference on composite materials
  European conference on composite materials (GERMANIA)
  European conference on composite materials (Monaco, Germania) 20-30 giugno 2016
  pp.8

• Thermoplastic Adhesive for Automotive Applications
  Book chapter
  

  Belingardi, Giovanni; Ciardiello, Raffaele; Martorana, Brunetto; Brunella, Valentina
  Adhesives, application and properties.
  Anna Rudawska (CROAZIA)
  pp.22 (pp.341-362) ISBN:9789535127833 DOI:10.5772/65168

• Investigation and Mechanical Modelling of Pure Molybdenum at High Strain-Rate and Temperature
  Article
  

  Scapin, Martina; Peroni, Lorenzo; Carra, Federico
  JOURNAL OF DYNAMIC BEHAVIOR OF MATERIALS
  SpringerLink
  Vol.2 pp.16 (pp.460-475) ISSN:2199-7446 DOI:10.1007/s40870-016-0081-3

• Mechanical behaviour of pure iridium in high strain-rate and high temperature loading conditions
  Proceeding
  

  Scapin, Martina; Peroni, Lorenzo; Tridello, Andrea
  In: Titolo volume non avvalorato
  -
  1st International Conference on Impact Loading of Structures and Materials (Torino (Italia)) 22-26 Maggio 2016
  pp.4

• The Role of Manufacturing Execution Systems in Supporting Lean Manufacturing
  Proceeding
  

  D'Antonio, Gianluca; SAUZA BEDOLLA, Joel; Rustamov, Akmal; Lombardi, Franco; Chiabert, Paolo
  In: Product Lifecycle Management for digital transformation of industries
  Springer (GERMANIA)
  13th IFIP WG 5.1 International Conference on Product Lifecycle Management for Digital Transformation of Industries, PLM 2016 (Columbia; USA) 11 July 2016 through 13 July 2016
  Vol.492 pp.9 (pp.206-214) ISBN:9783319546599 DOI:10.1007/978-3-319-54660-5_19

• Weldability and monitoring of resistance spot welding of Q&P and TRIP steels
  Article
  

  RUSSO SPENA, Pasquale; DE MADDIS, Manuela; D'Antonio, Gianluca; Lombardi, Franco
  METALS
  MDPI AG
  Vol.6 pp.15 (pp.1-15) ISSN:2075-4701 DOI:10.3390/met6110270

• Influenza del trattamento di kolsterizzazione sulla resistenza a corrosione dell’acciaio inossidabile AISI 204Cu
  Article
  

  Rosalbino, Francesco; Ubertalli, Graziano; DI SAVERIO, Davide
  LA METALLURGIA ITALIANA
  Associazione Italiana di Metallurgia. - Brescia: Edimet
  Vol.12 pp.11 (pp.115-125) ISSN:0026-0843

• Adhesives in Very High Cycle Fatigue testing
  Proceeding
  

  Goglio, Luca; Paolino, Davide Salvatore; Tridello, Andrea; Chiandussi, Giorgio
  In: ABSTRACT BOOK
  Organizing Committee ACEX 2016
  10th International Conference on Advanced Computational Engineering and Experimenting ACEX 2016 (Split (Croatia)) 3-6 July, 2016
  pp.1

• BONDING OF CERAMICS: AN ANALYSIS OF THE TORSION HOURGLASS SPECIMEN
  Article
  

  Goglio, Luca; Ferraris, Monica
  INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
  Elsevier
  Vol.70 pp.7 (pp.46-52) ISSN:0143-7496 DOI:10.1016/j.ijadhadh.2016.05.006

• Piattaforma Connect (450 esercizi) per il manuale di William F. Smith e Javad Hashemi, Scienza e tecnologia dei materiali 4/ed, © 2016 McGraw-Hill Education Italy srl
  Book chapter
  

  Baino, Francesco; Miola, Marta; Perero, Sergio
  Scienza e tecnologia dei materiali
  McGraw-Hill Education Italy srl
  ISBN:9788838615368

• Analysis of the dynamic behaviour of tungsten in post-necking regime
  Proceeding
  

  Peroni, Lorenzo; Scapin, Martina; Tridello, Andrea
  In: Titolo volume non avvalorato
  1st International Conference on Impact Loading of Structures and Materials (Torino (Italia)) 22-26 maggio 2016
  pp.4

• New Ba-free glass-ceramic sealant for SOCs application: characterization and performance
  Proceeding
  

  Sabato, ANTONIO GIANFRANCO; Cempura, Gregorz; Montinaro, Dario; Chrysanthou, Andreas; Salvo, Milena; Ferraris, Monica; Smeacetto, Federico
  In: 40th International conference on advanced ceramics and composites ICACC2016
  40th International conference on advanced ceramics and composites ICACC2016 (Daytona Beach, Florida) 34-29 Gennaio 2016
  

• New glass-ceramic sealants for SOFCs application: characterization and compatibility with interconnects
  Proceeding
  

  Sabato, ANTONIO GIANFRANCO; Salvo, Milena; Smeacetto, Federico; Kusnezoff, Mihails; Schilm, Jochen; Ferraris, Monica
  In: Abstract lectures & posters
  Deutsche Keramische Gesellschaft e. V. (GERMANIA)
  6th International Congress on Ceramics, From lab to Fab, ICC6 (Dresden) August 21-25, 2016
  pp.1

• VHCF Response of H13 Steels Produced with Different Manufacturing Processes
  Article
  

  Tridello, Andrea; Paolino, Davide Salvatore; Chiandussi, Giorgio; Rossetto, Massimo
  PROCEDIA ENGINEERING
  Elsevier Ltd
  Vol.160 pp.8 (pp.93-100) ISSN:1877-7058 DOI:10.1016/j.proeng.2016.08.867

• S-N curves in the very-high-cycle fatigue regime: Statistical modeling based on the hydrogen embrittlement consideration
  Article
  

  Paolino, Davide Salvatore; Tridello, Andrea; Chiandussi, Giorgio; Rossetto, Massimo
  FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
  Blackwell Publishing Ltd
  Vol.39 pp.18 (pp.1319-1336) ISSN:8756-758X DOI:10.1111/ffe.12431

• VHCF strength decrement in large H13 steel specimens subjected to ESR process
  Article
  

  Tridello, Andrea; Paolino, Davide Salvatore; Chiandussi, Giorgio; Rossetto, Massimo
  PROCEDIA STRUCTURAL INTEGRITY
  ELSEVIER
  Vol.2 pp.8 (pp.1117-1124) ISSN:2452-3216 DOI:10.1016/j.prostr.2016.06.143

• Development and integration of glass fiber sensors for monitoring diffusion of chemicals in polymer composites in harsh environments
  Proceeding
  

  Salvo, Milena; Milsom, Ben; MARRO BELLOT, Cristian; Sangermano, Marco; Milanese, Daniel; Olivero, Massimo
  In: European Conference on Fracture ECF21
  European Conference on Fracture ECF21 (Catania) June, 20th -24th
  Vol.Proceedings of the European Conference on Fracture ECF21 pp.1

• High strain rate behavior of aluminum die cast components
  Article
  

  Ubertalli, Graziano; D'Aiuto, Fabio; Plano, S.; DE CARO, Daniele
  PROCEDIA STRUCTURAL INTEGRITY
  Elsevier
  Vol.Procedia Structural Integrity pp.8 (pp.3617-3624) ISSN:2452-3216

• INFLUENCE OF THE INDUCTION HEATING PROCESS ON A NANO-MODIFIED ADHESIVE FOR AUTOMOTIVE APPLICATIONS
  Proceeding
  

  Ciardiello, Raffaele; Belingardi, Giovanni; Martorana, B.; Brunella, V.
  In: proc. of EURADH 2016 11th European Adhesion Conference
  EURADH 2016 11th European Adhesion Conference and ADHESION '16 13th International Triennial Conference on the Science and Technology of Adhesion and Adhesives (Glasgow (UK)) 21-23 September 2016
  pp.4 (pp.1-4)

• Mechanical properties of a thermoplastic adhesive modified with graphene nanoplatelets for automotive applications
  Proceeding
  

  Ciardiello, Raffaele; Belingardi, Giovanni; Martorana, B.; Bertocchi, F.; Cristiano, F.; Zanetti, M.; Brunella, V.
  In: proc. of ICAutoC2016 – Int. Conf. on Automotive Composite
  ICAutoC2016 – Int. Conf. on Automotive Composite (Lisbon (P)) 21-23 September 2016
  pp.7 (pp.1-7)

• Dissimilar Resistance Spot Welding of Q&P and TWIP Steel Sheets
  Article
  

  RUSSO SPENA, Pasquale; DE MADDIS, Manuela; Lombardi, Franco; Rossini, Matteo
  MATERIALS AND MANUFACTURING PROCESSES
  Taylor and Francis Inc.
  Vol.31 pp.9 (pp.291-299) ISSN:1042-6914 DOI:10.1080/10426914.2015.1048476

• Glass-ceramic sealant for solid oxide fuel cells application: Characterization and performance in dual atmosphere
  Article
  

  Sabato, ANTONIO GIANFRANCO; Cempura, G.; Montinaro, D.; Chrysanthou, A.; Salvo, Milena; Bernardo, E.; Secco, M.; Smeacetto, Federico
  JOURNAL OF POWER SOURCES
  Elsevier
  Vol.328 pp.9 (pp.262-270) ISSN:0378-7753 DOI:10.1016/j.jpowsour.2016.08.010

• Joining of CVD-SiC coated and uncoated fibre reinforced ceramic matrix composites with pre-sintered Ti3SiC2 MAX phase using Spark Plasma Sintering
  Article
  

  Tatarko, Peter; Casalegno, Valentina; Hu, Chunfeng; Salvo, Milena; Ferraris, Monica; Reece, Michael J.
  JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
  Elsevier
  Vol.36 pp.11 (pp.3957-3967) ISSN:0955-2219 DOI:10.1016/j.jeurceramsoc.2016.06.025

• Oxidation protective glass–ceramic coating for higher manganese silicide thermoelectrics
  Article
  

  Ning, Huanpo; Reece Michael, J.; Smeacetto, Federico; Salvo, Milena
  JOURNAL OF MATERIALS SCIENCE
  Springer
  Vol.51 pp.6 (pp.9484-9489) ISSN:0022-2461 DOI:10.1007/s10853-016-0192-1

• A methodology for the assessment of residual elastic properties in damaged components made of composite materials
  Proceeding
  

  D’Andrea, A.; Paolino, Davide Salvatore; Belingardi, Giovanni
  In: proceedings of the ICILSM2016
  International Conference on Impact Loading of Structures and Materials (Torino) 22-26 maggio 2016
  pp.4 (pp.1-4)

• Shear tests on joined materials: a comparison between torsion and ISO 13124
  Proceeding
  

  Ferraris, Monica; Goglio, Luca; Salvo, Milena; Smeacetto, Federico; DE LA PIERRE DES AMBROIS, Stefano; Casalegno, Valentina; Gonczy, Stephen; Henager, Charles; Hinoki, Tatsuya; Katoh, Yutai
  In: 40th International Conference and Exposition on Advanced Ceramics and Composites
  40th International Conference and Exposition on Advanced Ceramics and Composites (Daytona Beach, Florida, USA) January 24-29, 2016
  pp.1

• Damage analysis of composite–aluminium adhesively-bonded single-lap joints
  Article
  

  Ribeiro, T. E. A.; Campilho, R. D. S. G.; da Silva, L. F. M.; Goglio, Luca
  COMPOSITE STRUCTURES
  Elsevier
  Vol.136 pp.9 (pp.25-33) ISSN:0263-8223 DOI:10.1016/j.compstruct.2015.09.054

• Smart Composite Coatings and Membranes
  Book chapter
  

  Ferraris, Sara; Perero, Sergio
  Smart Composite Coatings and Membranes (Transport, Structural, Environmental and Energy Applications)
  Elsevier (REGNO UNITO DI GRAN BRETAGNA)
  pp.28 (pp.33-60) ISBN:9781782422839

• Microstructure and mechanical properties of C/C composite/Ti6Al4V joints with aCu/TiCuZrNi composite brazing alloy
  Article
  

  Song, Xinrui; Li, Hejun; Casalegno, Valentina; Salvo, Milena; Ferraris, Monica; Zeng, Xierong
  CERAMICS INTERNATIONAL
  elsevier
  Vol.42 pp.8 (pp.6347-6354) ISSN:0272-8842 DOI:10.1016/j.ceramint.2016.01.026

• Friction, mechanical and ageing properties of surface modified materials for space debris capture
  Article
  

  Ferraris, Sara; Perero, Sergio; Gautier di Confiengo, Giovanna; Chiesa, Alessandro; Messidoro, Andrea; Ferraris, Monica
  ADVANCES IN SPACE RESEARCH
  Elsevier
  Vol.57 pp.12 (pp.1177-1188) ISSN:0273-1177 DOI:10.1016/j.asr.2015.12.034

• Novel antibacterial ocular prostheses: proof of concept and physico-chemical characterization
  Article
  

  Baino, Francesco; Ferraris, Sara; Miola, Marta; Perero, Sergio; Verne', Enrica; Coggiola, Andrea; Dolcino, Daniela; Ferraris, Monica
  MATERIALS SCIENCE AND ENGINEERING. C, BIOMIMETIC MATERIALS, SENSORS AND SYSTEMS
  Elsevier
  Vol.60 pp.8 (pp.467-474) ISSN:0928-4931 DOI:10.1016/j.msec.2015.11.075

• Different inclusion contents in H13 steel: Effects on VHCF response of Gaussian specimens
  Book chapter
  

  Tridello, Andrea; Paolino, Davide Salvatore; Chiandussi, Giorgio; Rossetto, Massimo
  Key Engineering Materials (Advances in Fracture and Damage Mechanics XIV)
  Trans Tech Publications (SVIZZERA)
  Vol.665 pp.4 (pp.49-52) ISBN:9783038355410 DOI:10.4028/www.scientific.net/KEM.665.49

• Statistical estimation of duplex S-N curves
  Book chapter
  

  Paolino, Davide Salvatore; Tridello, Andrea; Chiandussi, Giorgio; Rossetto, Massimo
  Advances in Very High Cycle Fatigue
  Trans Tech Publications (SVIZZERA)
  Vol.664 pp.10 (pp.285-294) ISBN:9783038355755 DOI:10.4028/www.scientific.net/KEM.664.285

• Method for automatic alignment recovery of a spur gear
  Article
  

  Barbato, Giulio; Chiabert, Paolo; D'Antonio, Gianluca; DE MADDIS, Manuela; Lombardi, Franco; Ruffa, Suela
  INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH
  Taylor and Francis Ltd.
  Vol.54 pp.12 (pp.4475-4486) ISSN:0020-7543 DOI:10.1080/00207543.2015.1064180

• Gaussian specimens for VHCF tests: Analytical prediction of damping effects
  Article
  

  Tridello, Andrea; Paolino, Davide Salvatore; Chiandussi, Giorgio; Rossetto, Massimo
  INTERNATIONAL JOURNAL OF FATIGUE
  Elsevier
  Vol.83 pp.6 (pp.36-41) ISSN:0142-1123 DOI:10.1016/j.ijfatigue.2015.04.025

• Guest editorial: GlaCERCo: Glass and ceramic composites for high technology applications - Marie Curie initial training network
  Article
  

  Boccaccini, A. R.; Ferraris, M.; Reece, M. J.; Salvo, M.
  ADVANCES IN APPLIED CERAMICS
  Maney Publishing
  Vol.114 pp.2 (pp.S1-S2) ISSN:1743-6753 DOI:10.1179/1743675315Z.000000000347

• CRITICAL REVIEW OF THE CURRENT ASSESSMENT APPROACHES FOR FRONTAL CRASH COMPATIBILITY REGARDING THE EVALUATION OF STRUCTURAL INTERACTION
  Proceeding
  

  Sadeghipour, Emad; Fischer, Morris; Duddeck, Fabian; Lienkamp, Markus; Ciardiello, Raffaele
  In: Titolo volume non avvalorato"
  Nhtsa
  International Technical Conference on the Enhanced Safety of Vehicles (ESV) (Goteborg) June 8-11
  pp.9

• Joining of Al-6016 to Al-foam using Zn-based alloys to obtain aluminium foam sandwich (AFS) for aerospace applications
  Proceeding
  

  Bangash, MUHAMMAD KASHIF; Gianchandani, PARDEEP KUMAR; Ubertalli, Graziano; Casalegno, Valentina; Ferraris, Monica
  In: 23rd Conference of the Italian Association of Aeronautics and Astronautics - AIDAA 2015
  Italian Association of Aeronautics and Astronautics
  Innovative Training Networks and Manufacturing Technologies for Composite Structures for the Aerospace Sector: ADMACOM, COACH and FULLCOMP European projects Coordinated by Politecnico di Torino (Politecnico di Torino and Oval Lingotto, Torino, Italy) 16-19 November 2015
  

• Novel glass-ceramic based sealants and their interaction with MnCo spinel coated interconnects for solid oxide cells.
  Proceeding
  

  Sabato, ANTONIO GIANFRANCO; Cempura, Gregorz; Gruszczynski, Adam; Montinaro, Dario; Salvo, Milena; Ferraris, Monica; Smeacetto, Federico
  In: 14th International Conference of European Ceramic Society
  14th International Conference of European Ceramic Society (Toledo, Spain) 21-25 Giugno 2015
  

• Laser welding between TWIP steels and automotive high-strength steels
  Proceeding
  

  Russo Spena, Pasquale; Rossini, Matteo; Cortese, Luca; Matteis, Paolo; Scavino, Giorgio; Firrao, Donato
  In: Characterization of Minerals, Metals, and Materials 2015
  John Wiley & Sons, Inc. (STATI UNITI D'AMERICA)
  TMS2015 144th Annual Meeting & Exhibition (Orlando, Florida, USA) 15-19 marzo 2015
  pp.10 (pp.11-20) ISBN:9781119093404 DOI:10.1002/9781119093404.ch2

• VERY-HIGH-CYCLE FATIGUE RESPONSE OF A HIGH-PERFORMANCE STEEL
  Proceeding
  

  Tridello, Andrea; Paolino, Davide Salvatore; Chiandussi, Giorgio; Rossetto, Massimo
  In: Titolo volume non avvalorato
  XXIII Conference of the Italian Association of Aeronautics and Astronautics - AIDAA2015 (Torino) 17-19 Novembre 2015
  pp.10

• CARATTERIZZAZIONE A FATICA AD ALTISSIMO NUMERO DI CICLI DI UN ACCIAIO AISI H13 AD ELEVATO GRADO DI PUREZZA
  Proceeding
  

  Tridello, Andrea; Paolino, Davide Salvatore; Chiandussi, Giorgio; Rossetto, Massimo
  In: Titolo volume non avvalorato
  AIAS (Associazione Italiana per l'Analisi delle Sollecitazioni) (ITALIA)
  44° Convegno AIAS (Messina) 2-5 Settembre 2015
  pp.7

• Characterization of Welded Joints (MIG and SAW) on LDX 2101 Duplex SS
  Article
  

  Ubertalli, Graziano; Firrao, Donato; Taveri, Gianmarco
  PROCEDIA ENGINEERING
  Elsevier Ltd
  Vol.109 pp.8 (pp.484-491) ISSN:1877-7058 DOI:10.1016/j.proeng.2015.06.253

• Mechanical Strength and Fracture of Resistance Spot Welded Advanced High Strength Steels
  Proceeding
  

  Spena, Pasquale Russo; DE MADDIS, Manuela; Lombardi, Franco
  PROCEDIA ENGINEERING
  In: XXIII Italian Group of Fracture Meeting, IGFXXIII
  Elsevier
  23rd Italian Group of Fracture National Conference-, IGF 2014 (Trapani) 22 June 2015 through 24 June 2015
  Vol.109 pp.7 (pp.450-456) ISSN:1877-7058 DOI:10.1016/j.proeng.2015.06.262

• Investigation on Resistance Spot Welding of TWIP Steel Sheets
  Article
  

  RUSSO SPENA, Pasquale; DE MADDIS, Manuela; Lombardi, Franco; Rossini, Matteo
  STEEL RESEARCH INTERNATIONAL
  Wiley-VCH Verlag
  Vol.86 pp.10 (pp.1480-1489) ISSN:1611-3683 DOI:10.1002/srin.201400336

• ANALISI DELLA CURVA DI FLUSSO PLASTICO DI MATERIALI METALLICI BASATA SULLA MISURA SPERIMENTALE DEL PROFILO DI NECKING
  Proceeding
  

  Peroni, Lorenzo; Scapin, Martina; Fichera, Claudio
  In: Titolo volume non avvalorato
  44° Convegno Nazionale Associazione Italiana per l'Analisi delle Sollecitazioni (Messina (Italia)) 2-5 Settembre 2015
  pp.10

• An advanced identification procedure for material model parameters based on image analysis
  Proceeding
  

  Peroni, Lorenzo; Scapin, Martina; Fichera, Claudio
  In: Proceeding of 10th European LS-DYNA Conference
  10th European LS-DYNA Conference (Würzburg (Germania)) 15-17 Giugno 2015
  pp.10

• Experimental investigation of the behaviour of tungsten and molybdenum alloys at high strain-rate and temperature
  Proceeding
  

  Scapin, Martina; Fichera, Claudio; Carra, Federico; Peroni, Lorenzo
  In: EPJ Web of Conferences
  EDP Sciences
  11th International Conference on the Mechanical and Physical Behaviour of Materials Under Dynamic Loading, DYMAT 2015 (Lugano (Svizzera)) 7-11 Settembre 2015
  Vol.94 pp.6 ISBN:9782759818174 DOI:10.1051/epjconf/20159401021

• Environmental tools as support of sustainable development
  Book chapter
  

  Gecevska, Valentina; Chiampo, Fulvia; Angelides, Demos; Cus, Franc; Lombardi, Franco
  Towards technical education on resource savings for industrial development
  Faculty of Mechanical Engineering, University of Maribor (Slovenia) (SLOVENIA)
  pp.10 (pp.213-222) ISBN:9789612484880

• Product lifecycle management competitive technology solution
  Book chapter
  

  Gecevska, Valentina; Cus, Franc; Lombardi, Franco; Chiampo, Fulvia
  Towards technical education on resource savings for industrial development
  Faculty of Mechanical Engineering, University of Maribor (Slovenia) (SLOVENIA)
  pp.15 (pp.183-197) ISBN:9789612484880

• A word from the editors
  Book chapter
  

  Cus, Franc; Chiampo, Fulvia; Lombardi, Franco; Gecevska, Valentina
  Towards technical education on resource savings for industrial development
  Faculty of Mechanical Engineering, University of Maribor (Slovenia) (SLOVENIA)
  pp.1 ISBN:9789612484880

• Micro-computed tomography evaluation of ProTaper next and BioRace shaping outcomes in maxillary first molar curved canals
  Article
  

  Pasqualini, Damiano; Alovisi, Mario; Cemenasco, Andrea; Mancini, Lucia; Paolino, Davide Salvatore; Bianchi, Caterina Chiara; Roggia, Andrea; Scotti, Nicola; Berutti, Elio
  JOURNAL OF ENDODONTICS
  Elsevier
  Vol.41 pp.5 (pp.1706-1710) ISSN:0099-2399 DOI:10.1016/j.joen.2015.07.002

• Statistical distributions of Transition Fatigue Strength and Transition Fatigue Life in duplex S-N fatigue curves
  Article
  

  Paolino, Davide Salvatore; Tridello, Andrea; Chiandussi, Giorgio; Rossetto, Massimo
  THEORETICAL AND APPLIED FRACTURE MECHANICS
  Elsevier
  Vol.80 pp.9 (pp.31-39) ISSN:0167-8442 DOI:10.1016/j.tafmec.2015.07.006

• VHCF response of AISI H13 steel: assessment of size effects through Gaussian specimens
  Article
  

  Tridello, Andrea; Paolino, Davide Salvatore; Chiandussi, Giorgio; Rossetto, Massimo
  PROCEDIA ENGINEERING
  Elsevier
  Vol.109 pp.7 (pp.121-127) ISSN:1877-7058 DOI:10.1016/j.proeng.2015.06.218

• Prediction of cyclic fatigue life of NiTi rotary files by Virtual Modeling and Finite Elements Analysis
  Article
  

  Scattina, Alessandro; Alovisi, Mario; Paolino, Davide Salvatore; Pasqualini, Damiano; Scotti, Nicola; Chiandussi, Giorgio; Berutti, Elio
  JOURNAL OF ENDODONTICS
  Elsevier Inc.
  Vol.41 pp.4 (pp.1867-1870) ISSN:0099-2399 DOI:10.1016/j.joen.2015.07.010

• Prediction of contact points and pressures against canal walls of NiTi rotary files by virtual modeling and finite elements analysis
  Proceeding
  

  Scattina, Alessandro; Gibello, U.; Alovisi, M.; Paolino, Davide Salvatore; Pasqualini, D.; Scotti, N.; Chiandussi, Giorgio; Berutti, E.
  In: Titolo volume non avvalorato
  John Wiley & Sons Ltd (STATI UNITI D'AMERICA)
  17th Biennial ESE European Society of Endodontology Congress (Barcelona, Spain) 16-19 settembre 2015
  DOI:10.1111/iej.12496

• GRAPHENE-BASED COMPOSITE MATERIALS FOR AUTOMOTIVES
  Proceeding
  

  Elmarakbi, Ahmed; Azoti, Wiyao; Martorana, Brunetto; Belingardi, Giovanni; Ciardiello, Raffaele
  In: proc. of the ICCM20 - 20th International Conference on Composite Materials
  International Conference on Composite Materials
  ICCM20 - 20th International Conference on Composite Materials (Copenhagen (Denmark)) 19-24th July 2015
  Vol.proc. of the ICCM20 - 20th International Conference on Composite Materials pp.5 (pp.1-5)

• PLM-MES integration to support collaborative design
  Proceeding
  

  D'Antonio, Gianluca; SAUZA BEDOLLA, Joel; Chiabert, Paolo; Lombardi, Franco
  In: Design Information and Knowledge Management
  Design Society (REGNO UNITO DI GRAN BRETAGNA)
  The 20th International Conference on Engineering Design (ICED 15) (Milano) 27-30.07.2015
  Vol.10 pp.10 (pp.81-90) ISBN:9781904670735

• Biomass ash as supplementary cementitious material (SCM)
  Article
  

  Salvo, Milena; Rizzo, Stefano; Caldirola, Marcello; Novajra, Giorgia; Canonico, F.; Bianchi, M.; Ferraris, Monica
  ADVANCES IN APPLIED CERAMICS
  Maney Publishing/Taylor and Francis
  Vol.114 pp.8 (pp.3-10) ISSN:1743-6753 DOI:10.1179/1743676115Y.0000000043

• Glass optical fibre sensors for detection of through thickness moisture diffusion in glass reinforced composites under hostile environments
  Article
  

  Milsom, Ben; Olivero, Massimo; Milanese, Daniel; Giannis, Stefanos; Martin, Roderick; Terenzi, Andrea; Kenny, Josè; Ferraris, Monica; Perrone, Guido; Salvo, Milena
  ADVANCES IN APPLIED CERAMICS
  Maney Publishing/Taylor and Francis
  Vol.114 pp.8 (pp.76-83) ISSN:1743-6753 DOI:10.1179/1743676115Y.0000000034

• Caratterizzazione di leghe Zama 2 pressocolate in riferimento a fenomeni connessi con l'invecchiamento
  Article
  

  Ubertalli, Graziano; Rosalbino, Francesco; Matteis, Paolo; Scavino, Giorgio; Firrao, Donato; Scandaliato, F.
  LA METALLURGIA ITALIANA
  Consedit, Grado (GO)
  Vol.107 pp.9 (pp.27-35) ISSN:0026-0843

• Bonding of Ceramics: an Analysis of Recent Joint Specimens
  Proceeding
  

  Goglio, Luca; Ferraris, Monica
  In: Book of abstracts
  Publindústria, Produção de Comunicação, Lda (PORTOGALLO)
  3rd International Conference on Structural Adhesive Bonding AB 2015 (Porto (P)) 2-3 Luglio 2015
  pp.1 ISBN:9789897231353

• Shear Strength Tests of a Glass-Ceramic Sealant for Solid Oxide Fuel Cells Applications
  Article
  

  Smeacetto, Federico; DE MIRANDA, AURISTELA CARLA; Ventrella, Andrea; Salvo, Milena; Ferraris, Monica
  ADVANCES IN APPLIED CERAMICS
  Maney Publishing on behalf of the Institute of Materials, Minerals and Mining
  Vol.114 pp.6 (pp.70-75) ISSN:1743-6753 DOI:10.1179/1743676115Y.0000000042

• Microwave Assisted Self-Propagating High-Temperature Synthesis for Joining SiC Ceramics and SiC/SiC Composites by Ni-Al System
  Book chapter
  

  Han, Shaohua; Roberto, Rosa; Casalegno, Valentina; Salvo, Milena; Paolo, Veronesi; Ferraris, Monica; Cristina, Leonelli
  APPLIED MECHANICS AND MATERIALS
  Applied Mechanics and Materials
  Wen-Pei Sung and Jimmy (C.M.) Kao
  Vol.727-728 pp.6 (pp.213-218) ISSN:1662-7482 DOI:10.4028/www.scientific.net/AMM.727-728.213

• Investigation on dissimilar laser welding of advanced high strength steel sheets for the automotive industry
  Article
  

  Rossini, M.; Russo Spena, P.; Cortese, L.; Matteis, Paolo; Firrao, Donato
  MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
  Elsevier
  Vol.628 pp.9 (pp.288-296) ISSN:0921-5093 DOI:10.1016/j.msea.2015.01.037

• Longevity of class 2 direct restorations in root-filled teeth: A retrospective clinical study
  Article
  

  N., Scotti; C., Eruli; A., Comba; Paolino, Davide Salvatore; M., Alovisi; D., Pasqualini; E., Berutti
  JOURNAL OF DENTISTRY
  Elsevier
  Vol.43 pp.7 (pp.499-505) ISSN:0300-5712 DOI:10.1016/j.jdent.2015.02.006

• Cut quality assessment of CO2 laser cutting of twinning-induced plasticity steel sheets
  Article
  

  Russo Spena, P.; DE MADDIS, Manuela; Lombardi, Franco
  PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART B, JOURNAL OF ENGINEERING MANUFACTURE
  In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
  SAGE PUBLICATIONS LTD, 1 OLIVERS YARD, 55 CITY ROAD, LONDON EC1Y 1SP, ENGLAND
  Vol.229 pp.17 (pp.3-19) ISSN:0954-4054 DOI:10.1177/0954405414525382

• Guest editorial
  Article
  

  Goglio, Luca
  INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
  Elsevier
  Vol.56 pp.2 (pp.1-2) ISSN:0143-7496 DOI:10.1016/j.ijadhadh.2014.09.006

• Improvement of powertrain mechatronic systems for lean automotive manufacturing
  Proceeding
  

  Chiabert, Paolo; D'Antonio, Gianluca; Inoyatkhodjaev, J.; Lombardi, Franco; Ruffa, Suela
  PROCEDIA CIRP
  In: Procedia CIRP
  Elsevier
  9th CIRP Conference on Intelligent Computation in Manufacturing Engineering - CIRP ICME '14 (Capri) 23-25 July 2014
  Vol.33 pp.6 (pp.53-58) ISSN:2212-8271 DOI:10.1016/j.procir.2015.06.011

• Structural, optical and magnetic properties of Fe3O4 sputtered TeO2–PbO–B2O3 and PbO–Bi2O3–B2O3 glasses for sensing applications
  Article
  

  Chen, Qiuling; Huiwang, ; Perero, Sergio; Qingweiwang, ; Chen, Qiuping
  JOURNAL OF NON-CRYSTALLINE SOLIDS
  ELSEVIER
  Vol.408 pp.8 (pp.43-50) ISSN:0022-3093 DOI:10.1016/j.jnoncrysol.2014.10.011

• Electrophoretic deposition of Mn1.5Co1.5O4 on metallic interconnect and interaction with glass-ceramic sealant for solid oxide fuel cells application
  Article
  

  Smeacetto, Federico; DE MIRANDA, AURISTELA CARLA; Cabanas Polo, S.; Molin, S.; Boccaccini, D.; Salvo, Milena; Boccaccini, A. R.
  JOURNAL OF POWER SOURCES
  ELSEVIER
  Vol.280 pp.8 (pp.379-386) ISSN:0378-7753 DOI:10.1016/j.jpowsour.2015.01.120

• HIGH STRAIN-RATE AND HIGH TEMPERATURE BEHAVIOUR OF REFRACTORY SINTERED METALS
  Proceeding
  

  Peroni, Lorenzo; Scapin, Martina; Fichera, Claudio
  In: Plastic Behavior of Conventional and Advanced Materials: Theory, Experiment, and Modeling
  Akhtar S. Khan (STATI UNITI D'AMERICA)
  The 21st International Symposium on Plasticity and Its Current Applications (Montego Bay, Jamaica) Jan. 4-9, 2015
  pp.3

• Degradation of Epoxy-Steel Single Lap Joints Immersed in Water
  Article
  

  Goglio, Luca; Rezaei, Mohsen
  JOURNAL OF ADHESION
  Taylor & Francis
  Vol.91 pp.16 (pp.621-636) ISSN:0021-8464 DOI:10.1080/00218464.2014.948614

• Torsional Shear Strength Tests for Glass–Ceramic Joined Silicon Carbide
  Article
  

  Ferraris, Monica; Ventrella, Andrea; Salvo, Milena; Katoh, Y; Gross, D.
  INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY
  Wiley
  Vol.12 pp.7 (pp.693-699) ISSN:1546-542X DOI:10.1111/ijac.12248

• Sputtered silver nanocluster/silica composite coatings for antibacterial applications
  Book chapter
  

  Balagna, Cristina; Ferraris, Sara; Perero, Sergio; Miola, Marta; Baino, Francesco; Battiato, A.; Manfredotti, C.; Vittone, E.; Verne', Enrica; Ferraris, Monica
  Comprehensive guide for nanocoatings technology: Volume 4 Application and Commercialization
  NOVA Publishers, USA. (STATI UNITI D'AMERICA)
  Vol.4 pp.25 (pp.81-105) ISBN:9781634826488

• Gaussian Specimens for Gigacycle Fatigue Tests: Evaluation of Temperature Increment
  Book chapter
  

  Tridello, Andrea; Paolino, Davide Salvatore; Chiandussi, Giorgio; Rossetto, Massimo
  Advances in Fracture and Damage Mechanics XIII
  Trans Tech Publications Ltd (SVIZZERA)
  Vol.627 pp.4 (pp.85-88) DOI:10.4028/www.scientific.net/KEM.627.85

• Crystallization behaviour of glass-ceramic sealant for solid oxide fuel cells
  Article
  

  Sabato, ANTONIO GIANFRANCO; Salvo, Milena; DE MIRANDA, AURISTELA CARLA; Smeacetto, Federico
  MATERIALS LETTERS
  Elsevier BV: PO Box 211, 1000 AE Amsterdam Netherlands: 011 31 20 4853757, 4853642 011 31 20, 011 31 20 4853641, email: nlinfo-f@elsevier.nl, INTERNET: http://www.elsevier.nl, Fax : 011 31 20 4853598
  Vol.141 pp.4 (pp.284-287) ISSN:0167-577X DOI:10.1016/j.matlet.2014.11.128

• Dissimilar Metal Active Gas Welding of TWIP and DP Steel Sheets
  Article
  

  RUSSO SPENA, Pasquale; Matteis, Paolo; Scavino, Giorgio
  STEEL RESEARCH INTERNATIONAL
  Wiley
  Vol.86 pp.7 (pp.495-501) ISSN:1611-3683 DOI:10.1002/srin.201400154

• 7. Strain Measurement in an Aluminium Foam by Means of Digital Image Correlation
  Book chapter
  

  Goglio, Luca; Peroni, M.; Manfredini Vassoler, J.
  Visual Computing - Scientific Visualization and Imaging Systems
  Springer-Verlag (GERMANIA)
  pp.13 (pp.137-149) ISBN:9783642551307 DOI:10.1007/978-3-642-55131-4

• Silver nanocluster-silica composite antibacterial coatings formaterials to be used in mobile telephones
  Article
  

  Miola, Marta; Perero, Sergio; Ferraris, Sara; Alfio, Battiato; Chiara, Manfredotti; Ettore, Vittone; Davide Del, Vento; Simona, Vada; Giacomo, Fucale; Ferraris, Monica
  APPLIED SURFACE SCIENCE
  ELSEVIER
  Vol.313 pp.8 (pp.107-114) ISSN:0169-4332 DOI:10.1016/j.apsusc.2014.05.151

• DYNAMIC HIGH TEMPERATURE BEHAVIOUR OF HEAVY SINTERED MATERIALS
  Proceeding
  

  Fichera, Claudio; Peroni, Lorenzo; Scapin, Martina
  In: ABSTRACTS
  WORKSHOP ON DYNAMIC BEHAVIOUR OF MATERIALS AND ITS APPLICATIONS IN INDUSTRIAL PROCESSES (Varsavia) June 25-27, 2014
  pp.2 (pp.25-26)

• Investigation of the mechanical behaviour of AISI 316L stainless steel syntactic foams at different strain-rates
  Article
  

  Peroni, Lorenzo; Scapin, Martina; Fichera, Claudio; D., Lehmus; J., Weise; J., Baumeister; Avalle, Massimiliano
  COMPOSITES. PART B, ENGINEERING
  Elsevier Ltd
  Vol.66 pp.13 (pp.430-442) ISSN:1359-8368 DOI:10.1016/j.compositesb.2014.06.001

• PROGETTAZIONE OTTIMIZZATA DI UN SONOTRODO PER PROVE DI FATICA GIGACICLICA
  Proceeding
  

  Tridello, Andrea; Geng, Hanze; Paolino, Davide Salvatore; Chiandussi, Giorgio; Rossetto, Massimo
  In: AIAS 2014
  Padova University Press (ITALIA)
  43° Convegno Nazionale dell'AIAS (Rimini) 9-12 settembre 2014
  pp.9 ISBN:9788869380259

• Gaussian Specimens for Gigacycle Fatigue Tests: Damping Effects
  Article
  

  Tridello, Andrea; Paolino, Davide Salvatore; Chiandussi, Giorgio; Rossetto, Massimo
  PROCEDIA ENGINEERING
  ELSEVIER
  Vol.74 pp.6 (pp.113-118) ISSN:1877-7058 DOI:10.1016/j.proeng.2014.06.234

• Duplex S-N fatigue curves: statistical distribution of the transition fatigue life
  Article
  

  Paolino, Davide Salvatore; Tridello, Andrea; Geng, Hanze; Chiandussi, Giorgio; Rossetto, Massimo
  FRATTURA E INTEGRITÀ STRUTTURALE
  GRUPPO ITALIANO FRATTURA
  Vol.30 pp.7 (pp.417-423) ISSN:1971-8993 DOI:10.3221/IGF-ESIS.30.50

• Mechanical twins and a very cold case
  Proceeding
  

  Firrao, Donato; Matteis, Paolo; Ubertalli, Graziano
  In: Proceedings of MS&T 2014
  ACer, AIST, ASM, TMS, NACE (STATI UNITI D'AMERICA)
  Materials Science & Technology 2014 (Pittsburgh, PA, USA) 12/10/2014 - 16/10/2014
  pp.7 (pp.1717-1723)

• Caratterizzazione di leghe Zama 2 pressocolate in riferimento a fenomeni connessi con l’invecchiamento
  Proceeding
  

  Ubertalli, Graziano; Firrao, Donato; Scavino, Giorgio; Matteis, Paolo; Rosalbino, Francesco
  In: Atti del 35° Convegno Nazionale AIM
  AIM - Associazione Italiana di Metallurgia (ITALIA)
  35° Convegno Nazionale AIM (Roma) 5/11/2014 - 7/11/2014
  pp.12

• Crystallographic analysis reveals the effect of small charge explosions on FCC metals microstructure
  Book chapter
  

  Firrao, Donato; Ubertalli, Graziano; Matteis, Paolo
  Microscopy: advances in scientific research and education
  Formatex Research Center (SPAGNA)
  Vol.2 pp.12 (pp.1020-1031) ISBN:9788494213441

• Dissimilar arc welding of advanced high-strength car-body steel sheets
  Article
  

  Russo Spena, P.; D’Aiuto, F.; Matteis, Paolo; Scavino, Giorgio
  JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  ASM International / Springer
  Vol.23 pp.8 (pp.3949-3956) ISSN:1059-9495 DOI:10.1007/s11665-014-1209-z

• Chemical, mechanical and antibacterial properties of silvernanocluster/silica composite coated textiles for safety systems andaerospace applications
  Article
  

  Ferraris, Sara; Perero, Sergio; Miola, Marta; Verne', Enrica; Rosiello, A.; Ferrazzo, V.; Valletta, G.; Sanchez, J.; Ohrlander, M.; Tjörnhammard, S.; Fokine, M.; Laurell, F.; Blomberg, E.; Skoglund, S.; Odnevall Wallinder, I.; Ferraris, Monica
  APPLIED SURFACE SCIENCE
  Elsevier
  Vol.317 pp.9 (pp.131-139) ISSN:0169-4332 DOI:10.1016/j.apsusc.2014.07.196

• COMPORTAMENTO DI UNA LEGA DI ALLUMINIO 6061 T6 AD ALTA VELOCITA DI DEFORMAZIONE: CALIBRAZIONE E MODELLAZIONE
  Proceeding
  

  Andrea, Manes; Peroni, Lorenzo; Scapin, Martina; Marco, Giglio
  In: Atti del 43° Convegno Nazionale AIAS
  ASSOCIAZIONE ITALIANA PER L’ANALISI DELLE SOLLECITAZIONI (Rimini) 9-12 Settembre 2014
  pp.11

• ANALISI DI UNA PROCEDURA SPERIMENTALE PER LA CARATTERIZZAZIONE DI MATERIALI METALLICI A VELOCITA’ DI DEFORMAZIONE SUPERIORI A 10000 1/s
  Proceeding
  

  Peroni, Lorenzo; Scapin, Martina; Fichera, Claudio
  In: Atti del 43° Convegno Nazionale AIAS
  ASSOCIAZIONE ITALIANA PER L’ANALISI DELLE SOLLECITAZIONI (Rimini) 2-9 Settembre 2014
  pp.10

• BRAZILIAN TEST DINAMICO PER LA CARATTERIZZAZIONE DI PROTEZIONI BALISTICHE IN MATERIALE CERAMICO
  Proceeding
  

  Peroni, Lorenzo; Fichera, Claudio; Belingardi, Giovanni; Avalle, Massimiliano
  In: Atti del 43° Conv. Naz. AIAS
  43° Conv. Naz. AIAS (Rimini) 9-12 settembre 2014
  pp.12 (pp.1-12)

• Novel Glass-Ceramic Composition as Sealant for SOFCs
  Article
  

  Smeacetto, Federico; DE MIRANDA, AURISTELA CARLA; Andreas, Chrysanthou; Enrico, Bernardo; Michele, Secco; Massimiliano, Bindi; Salvo, Milena; Sabato, ANTONIO GIANFRANCO; Ferraris, Monica
  JOURNAL OF THE AMERICAN CERAMIC SOCIETY
  Wiley-Blackwell
  Vol.97 pp.8 (pp.3835-3842) ISSN:0002-7820 DOI:10.1111/jace.13219

• Development and integration of innovative glass fibre sensors into advanced composites for applications in hostile environments
  Proceeding
  

  Milsom, Ben; Olivero, Massimo; Milanese, Daniel; M., Roseman; S., Giannis; R., Martin; A., Terenzi; Ferraris, Monica; Salvo, Milena
  In: ECCM16 : 16th European conference on composite materials, Proceedings
  16th European conference on Composite Materials (ECCM-16) (Seville (Spain)) 22-26 June 2014
  pp.8

• ADVANCED MANUFACTURING ROUTES FOR METAL/COMPOSITE COMPONENTS FOR AEROSPACE
  Proceeding
  

  Salvo, Milena; Admacom, Team
  In: ECCM16 : 16th European conference on composite materials, Proceedings
  16th European conference on Composite Materials (ECCM-16) (Seville (Spain)) 22-26 June 2014
  pp.6

• On specimen design for size effect evaluation in ultrasonic gigacycle fatigue testing
  Article
  

  Paolino, Davide Salvatore; Tridello, Andrea; Chiandussi, Giorgio; Rossetto, Massimo
  FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
  Blackwell Publishing Ltd
  Vol.37 pp.10 (pp.570-579) ISSN:8756-758X DOI:10.1111/ffe.12149

• Effects of High-Energy Intense Multi-Bunches Proton Beam on Materials
  Article
  

  Scapin, Martina; Peroni, Lorenzo; Vittorio, Boccone; Francesco, Cerutti
  COMPUTERS & STRUCTURES
  Elsevier
  Vol.141 pp.10 (pp.74-83) ISSN:0045-7949 DOI:10.1016/j.compstruc.2014.05.008

• Arc welding of advanced high strength steels for car-body components
  Proceeding
  

  RUSSO SPENA, Pasquale; F., D’Aiuto; Matteis, Paolo; Scavino, Giorgio
  In: Characterization of Minerals, Metals, and Materials 2014
  John Wiley & Sons (STATI UNITI D'AMERICA)
  TMS 2014 Annual Meeting and Exhibition (San Diego) 16/2/2014 - 20/2/2014
  pp.8 (pp.277-284)

• TENSILE BEHAVIOUR OF T91 STEEL OVER A WIDE RANGE OF TEMPERATURES AND STRAIN-RATE UP TO 10^4 s^-1
  Article
  

  Scapin, Martina; Peroni, Lorenzo; Fichera, Claudio; Andrea, Cambriani
  JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  Springer
  Vol.23 pp.11 (pp.3007-3017) ISSN:1059-9495 DOI:10.1007/s11665-014-1081-x

• Thermo-Mechanical Modelling of High Energy Particle Beam Impacts
  Book chapter
  

  Scapin, Martina; Peroni, Lorenzo; Dallocchio, Alessandro
  Numerical Modeling of Materials Under Extreme Conditions
  Springer
  pp.20 ISBN:9783642542589 DOI:10.1007/978-3-642-54258-9_4

• Investigation of dynamic behaviour of copper at high temperature
  Article
  

  Scapin, Martina; Peroni, Lorenzo; Fichera, Claudio
  MATERIALS AT HIGH TEMPERATURES
  Maney Publishing
  Vol.31 pp.10 (pp.131-140) ISSN:0960-3409 DOI:10.1179/1878641314Y.0000000006

• Mechanical Behavior of Glidcop Al-15 at High Temperature and Strain Rate
  Article
  

  Scapin, Martina; Peroni, Lorenzo; Fichera, Claudio
  JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  Springer
  Vol.23 pp.10 (pp.1641-1650) ISSN:1059-9495 DOI:10.1007/s11665-014-0918-7

• Microleakage at enamel and dentin margins with a bulk fills flowable resin
  Article
  

  Nicola, Scotti; Mario, Alovisi; Elio, Berutti; Allegra, Comba; Alberto, Gambino; Paolino, Davide Salvatore; Damiano, Pasqualini
  EUROPEAN JOURNAL OF DENTISTRY
  Dental Investigations Society
  Vol.8 pp.8 (pp.1-8) ISSN:1305-7456 DOI:10.4103/1305-7456.126230

• Joining of β-SiC by spark plasma sintering
  Article
  

  Salvatore, Grasso; Peter, Tatarko; Rizzo, Stefano; Harshit, Porwal; Chunfeng, Hu; Yutai, Katoh; Salvo, Milena; Michael J., Reece; Ferraris, Monica
  JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
  Elsevier
  Vol.34 pp.6 (pp.1681-1686) ISSN:0955-2219 DOI:10.1016/j.jeurceramsoc.2013.12.023

• Biomaterials for orbital implants and ocular prostheses: overview and future prospects
  Article
  

  Baino, Francesco; Perero, Sergio; Ferraris, Sara; Miola, Marta; Balagna, Cristina; Verne', Enrica; VITALE BROVARONE, Chiara; Coggiola, A.; Dolcino, D.; Ferraris, Monica
  ACTA BIOMATERIALIA
  ELSEVIER
  Vol.10 pp.24 (pp.1064-1087) ISSN:1742-7061 DOI:10.1016/j.actbio.2013.12.014

• Joining of C/SiC composites by spark plasma sintering technique
  Article
  

  Rizzo, Stefano; Salvatore, Grasso; Salvo, Milena; Casalegno, Valentina; Michael J., Reece; Ferraris, Monica
  JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
  Elsevier, Amsterdam Netherlands
  Vol.34 pp.11 (pp.903-913) ISSN:0955-2219 DOI:10.1016/j.jeurceramsoc.2013.10.028

• Adhesive stresses in axially-loaded tubular bonded joints - Part II: development of an explicit closed-form solution for the Lubkin and Reissner model
  Article
  

  Goglio, Luca; Paolino, Davide Salvatore
  INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
  Elsevier
  Vol.48 pp.8 (pp.35-42) ISSN:0143-7496 DOI:10.1016/j.ijadhadh.2013.09.010

• Analytical design of gigacycle fatigue specimens for size effect evaluation
  Book chapter
  

  Tridello, Andrea; Paolino, Davide Salvatore; Chiandussi, Giorgio; Rossetto, Massimo
  Advances in Fracture and Damage Mechanics XII
  Trans Tech Publications Limited (REGNO UNITO DI GRAN BRETAGNA)
  Vol.577-578 pp.4 (pp.369-372) DOI:10.4028/www.scientific.net/KEM.577-578.369

• Fibre post adaptation and bond strength in oval canals
  Article
  

  N., Scotti; A., Forniglia; E., Bergantin; Paolino, Davide Salvatore; D., Pasqualini; E., Berutti
  INTERNATIONAL ENDODONTIC JOURNAL
  Wiley-Blackwell
  Vol.47 pp.7 (pp.366-372) ISSN:0143-2885 DOI:10.1111/iej.12156

• On the application of the stochastic approach in predicting fatigue reliability using Miner's damage rule
  Article
  

  Paolino, Davide Salvatore; Cavatorta, Maria Pia
  FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
  Wiley-Blackwell
  Vol.37 pp.11 (pp.107-117) ISSN:8756-758X DOI:10.1111/ffe.12093

• Proposal for a modified non-active brazing alloy for joining CFC composites to copper
  Article
  

  Casalegno, Valentina; Koppitz, T.; Pintsuk, G.; Salvo, Milena; Rizzo, Stefano; Perero, Sergio; Ferraris, Monica
  COMPOSITES. PART B, ENGINEERING
  Elsevier
  Vol.56 pp.7 (pp.882-888) ISSN:1359-8368 DOI:10.1016/j.compositesb.2013.08.079

• Shear Strength Measurement of AV119 Epoxy-Joined SiC by Different Torsion Tests
  Article
  

  Ferraris, Monica; Ventrella, Andrea; Salvo, Milena; Dietmar, Gross
  INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY
  John Wiley and Sons
  Vol.11 pp.8 (pp.394-401) ISSN:1546-542X DOI:10.1111/ijac.12025

• Variations in mechanical properties of an epoxy adhesive on exposure to warm moisture
  Article
  

  Goglio, Luca; Rezaei, Mohsen
  JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
  Taylor & Francis Inc.
  Vol.28 pp.11 (pp.1394-1404) ISSN:0169-4243 DOI:10.1080/01694243.2012.697392

• Moisture degradation of open-faced single lap joints
  Article
  

  Goglio, Luca; Rezaei, Mohsen; Rossetto, Massimo
  JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
  Taylor and Francis Inc.
  Vol.28 pp.12 (pp.1382-1393) ISSN:0169-4243 DOI:10.1080/01694243.2012.697391

• Degradation of Epoxy-Steel Single Lap Joints upon Immersion in Water
  Proceeding
  

  Goglio, Luca; Rezaei, Mohsen
  In: Book of Abstracts of the 2nd International conference on structural adhesive bonding AB 2013
  Faculty of Engineering University of Porto (PORTOGALLO)
  2nd International Conference on Structural Adhesive Bonding AB 2013 (Porto (P)) July 4-5, 2013
  ISBN:9789897230486

• Failure Criteria for Adhesive Bonds and their Relevance to Design: A Review
  Proceeding
  

  Goglio, Luca
  In: Abstract book
  ACE-X 2013 (Madrid (Spain)) July 1-4, 2013
  

• Novel glass-ceramic compositions for application as sealants for solid oxide fuel cells and solid oxide electrolysis cells
  Proceeding
  

  Smeacetto, Federico; A., De Miranda; Salvo, Milena; Ferraris, Monica; Leone, Pierluigi; Lanzini, Andrea; Santarelli, Massimo
  In: EFC 2013 - Proceedings of the 5th European Fuel Cell Piero Lunghi Conference
  ENEA - Agenzia nazionale per le nuove tecnologie, l'energia e lo sviluppo economico sostenibile (ITALIA)
  5th European Fuel Cell Piero Lunghi Conference and Exhibition, EFC 2013 (Rome; Italy)
  pp.2 DOI:10.978.888286/2978

• NOVEL GLASS-CERAMIC COMPOSITIONS FOR APPLICATION AS SEALANTS FOR SOLID OXIDE FUEL CELLS AND SOLID OXIDE ELECTROLYSIS CELLS
  Proceeding
  

  Smeacetto, Federico; DE MIRANDA, AURISTELA CARLA; Salvo, Milena; Ferraris, Monica; Leone, Pierluigi; Lanzini, Andrea; Santarelli, Massimo
  In: Proceedings of the 5th European Fuel Cell-Piero Lunghi Conference
  EFC 13 Fifth European Fuel Cell Technology & Applications Conference - Piero Lunghi Conference (Roma)
  pp.2 (pp.45-46)

• Strength and fracture of TWIP steel dissimilar weld joints
  Proceeding
  

  RUSSO SPENA, Pasquale; Matteis, Paolo; A., Sanchez; Scavino, Giorgio
  CONVEGNO NAZIONALE IGF...
  In: Acta Fracturae
  Gruppo Italiano Frattura (IGF) (ITALIA)
  XXII Convegno Nazionale IGF (Roma) 1/7/2013 - 3/7/2013
  pp.9 (pp.109-117) ISSN:2281-1443

• First results of an experiment on advanced collimator materials at CERN hiradmat facility
  Proceeding
  

  Bertarelli, A.; Aberle, O.; Assmann, R.; Berthomé, E.; Boccone, V.; Carra, Federico; Cerutti, F.; Charrondiere, C.; Dallocchio, A.; Donzé, M.; Francon, P.; Garlaschè, M.; Gentini, L.; Guinchard, M.; Mariani, N.; Masi, A.; Moyret, P.; Redaelli, S.; Rossi, A.; Cueva, M. C.; Charitonidis, N.; Peroni, Lorenzo; Scapin, Martina
  In: Proceedings of the 4th International Particle Accelerator Conference
  IPAC 2013 (Shanghai (China)) 12-17 maggio 2013
  

• Resistance Spot Welding of Advanced High Strength TWIP Steels
  Proceeding
  

  Russo Spena, P.; DE MADDIS, Manuela; Lombardi, Franco; D’Aiuto, F.
  In: Applied Mechanics and Materials
  Trans Tech Publications, Switzerland
  3rd International Conference on Applied Mechanics, Materials and Manufacturing, ICAMMM 2013
  Vol.423-426 pp.5 (pp.876-880) ISBN:9783037858882 DOI:10.4028/www.scientific.net/AMM.423-426.876

• Silver Nanocluster/Silica Composite Coatings Obtained by Sputtering for Antibacterial Applications
  Book chapter
  

  Balagna, Cristina; Ferraris, Sara; Perero, Sergio; Miola, Marta; Baino, Francesco; Coggiola, A.; Dolcino, D.; Battiato, A.; Manfredotti, C.; Vittone, E.; Verne', Enrica; Ferraris, Monica
  Structural Nanocomposites
  Springer-Verlag Berlin Heidelberg
  Vol.10 pp.22 (pp.225-247) ISBN:9783642403217 DOI:10.1007/978-3-642-40322-4_10

• Multi-purpose antibacterial coatings: sputtered silver nanoclusters-silica composite layers
  Proceeding
  

  Ferraris, Monica; Perero, Sergio; Ferraris, Sara; Miola, Marta; Baino, Francesco; Balagna, Cristina; A., Battiato; C., Manfredotti; E., Vittone; Verne', Enrica
  In: Book of Abstracts (online)
  European Conference on Smart & Functional Coatings (Torino) 26-27 Settembre, 2013
  pp.2

• Adhesive stresses in axially-loaded tubular bonded joints - Part I: Critical review and finite element assessment of published models
  Article
  

  Dragoni, Eugenio; Goglio, Luca
  INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
  Elsevier
  Vol.47 pp.11 (pp.35-45) ISSN:0143-7496 DOI:10.1016/j.ijadhadh.2013.09.009

• Influence of adhesive techniques on fracture resistance of endodontically treated premolars with various residual wall thicknesses
  Article
  

  Scotti, N.; Rota, R.; Scansetti, M.; Paolino, Davide Salvatore; Chiandussi, Giorgio; Pasqualini, D.; Berutti, E.
  THE JOURNAL OF PROSTHETIC DENTISTRY
  Elsevier
  Vol.110 pp.7 (pp.376-382) ISSN:0022-3913 DOI:10.1016/j.prosdent.2013.08.001

• Quasi-static and dynamic mechanical performance of glass microsphere- and cenosphere-based 316L syntactic foams
  Proceeding
  

  Dirk, Lehmhus; Jörg, Weise; Joachim, Baumeister; Peroni, Lorenzo; Scapin, Martina; Claudio, Fichera; Avalle, Massimiliano; Matthias, Busse
  In: Proceedings of 8th International Conference on Porous Metals and Metallic Foams (Metfoam 2013)
  8th International Conference on Porous Metals and Metallic Foams (Metfoam 2013) (Raleigh (USA)) 23-26 June 2013
  pp.4

• Analisi sperimentale del comportamento di materiali metallici sottoposti ad elevati strain-rate e temperature
  Proceeding
  

  Scapin, Martina; Peroni, Lorenzo; Fichera, Claudio
  In: Proceedings del 42° CONVEGNO NAZIONALE AIAS
  AIAS – ASSOCIAZIONE ITALIANA PER L’ANALISI DELLE SOLLECITAZIONI 42° CONVEGNO NAZIONALE, (UNIVERSITÀ DEGLI STUDI DI SALERNO) 11-14 SETTEMBRE 2013,
  pp.10

• UN SET-UP SPERIMENTALE PER LO STUDIO DEL COMPORTAMENTO DI MATERIALI IMPATTATI DA FASCI DI PARTICELLE AD ELEVATA ENERGIA
  Proceeding
  

  Carra, Federico; Scapin, Martina; A., Bertarelli; Peroni, Lorenzo
  In: Proceedings del 42° CONVEGNO NAZIONALE AIAS
  42° CONVEGNO NAZIONALE AIAS – ASSOCIAZIONE ITALIANA PER L’ANALISI DELLE SOLLECITAZIONI (UNIVERSITÀ DEGLI STUDI DI SALERNO) 11-14 SETTEMBRE 2013
  pp.10

• CARATTERIZZAZIONE SPERIMENTALE DI SCHIUME SINTATTICHE CON MATRICE IN AISI 316L
  Proceeding
  

  Peroni, Lorenzo; Avalle, Massimiliano; Scapin, Martina; Fichera, Claudio; D., Lehmhus; J., Weise
  In: Proceedings del 42° CONVEGNO NAZIONALE AIAS
  AIAS – ASSOCIAZIONE ITALIANA PER L’ANALISI DELLE SOLLECITAZIONI (UNIVERSITÀ DEGLI STUDI DI SALERNO) 11-14 SETTEMBRE 2013
  pp.10

• Cylindrical shock waves and dynamic phenomena induced in solids by intense proton beams
  Proceeding
  

  Alessandro, Bertarelli; Carra, Federico; Alessandro, Dallocchio; Michael, Guinchard; Nicola, Mariani; Peroni, Lorenzo; Stefano, Redaelli; Scapin, Martina
  BULLETIN OF THE AMERICAN PHYSICAL SOCIETY
  In: Titolo volume non avvalorato
  18th Biennial Intl. Conference of the APS Topical Group on Shock Compression of Condensed Matter held in conjunction with the 24th Biennial Intl. Conference of the Intl. Association for the Advancement of High Pressure Science and Technology (AIRAPT) (Seattle, Washington) July 9, 2013
  Vol.58, number 7 pp.1 ISSN:0003-0503

• A LS-DYNA/FLUKA COUPLING FOR THE NUMERICAL SIMULATION OF HIGH ENERGY PARTICLE BEAM INTERACTION WITH MATTER
  Proceeding
  

  Scapin, Martina; Peroni, Lorenzo; Vittorio, Boccone; Francesco, Cerutti
  In: Computational Methods for Coupled Problems in Science and Engineering V
  S. Idelsohn, M. Papadrakakis, and B. Schrefler
  Computational Methods for Coupled Problems in Science and Engineering V (Ibiza, Spain) 17-19 June 2013
  pp.8 (pp.1302-1309) ISBN:9788494140761

• Numerical simulation of landmine explosions: comparison between different modelling approaches
  Proceeding
  

  Fichera, Claudio; Peroni, Lorenzo; Scapin, Martina
  In: Computational Methods for Coupled Problems in Science and Engineering V
  Sergio R. Idelsohn Manolis, Papadrakakis Bernhard, A. Schrefler
  Proceedings of the V International Conference on Computational Methods for Coupled Problems in Science and Engineering (Ibiza, Spain) 17-19 June 2013
  pp.12 (pp.708-719) ISBN:9788494140761

• Behaviour of advanced materials impacted by high energy particle beams
  Article
  

  Bertarelli, A.; Carra, Federico; Cerutti, F.; Dallocchio, Alessandro; Garlasché, M.; Guinchard, M.; Mariani, N.; Dos, Santos; S. D., M.; Peroni, Lorenzo; Scapin, Martina; Boccone, V.
  JOURNAL OF PHYSICS. CONFERENCE SERIES
  Institute of Physics Publishing
  Vol.451 pp.6 ISSN:1742-6588 DOI:10.1088/1742-6596/451/1/012005

• Investigation of Dynamic Fracture Behavior of Graphite
  Book chapter
  

  Peroni, Lorenzo; Scapin, Martina; Carra, Federico; N., Mariani
  KEY ENGINEERING MATERIALS
  Damage assessment of structures X : selected, peer reviewed papers from the 10th international conference on damage assessment of structures, July 8-10, 2013, Dublin, Ireland
  Trans Tech Publications Inc.
  Vol.569 pp.8 (pp.103-110) ISSN:1662-9795 ISBN:9783037857960 DOI:10.4028/www.scientific.net/KEM.569-570.103

• Comparison between dog-bone and Gaussian specimens for size effect evaluation in gigacycle fatigue
  Article
  

  Tridello, Andrea; Paolino, Davide Salvatore; Chiandussi, Giorgio; Rossetto, Massimo
  FRATTURA E INTEGRITÀ STRUTTURALE
  GRUPPO ITALIANO FRATTURA
  Vol.26 pp.8 (pp.49-56) ISSN:1971-8993 DOI:10.3221/IGF-ESIS.26.06

• EFFECT OF POLYWAVE MULTILED CURING LIGHT DISTANCE ON SURFACE MICRO-HARDNESS DISTRIBUTION OF NANOFILLED COMPOSITES
  Proceeding
  

  Chiapello, M.; Bergantin, E.; Coero Borga, F. A.; Cadenaro, M.; Breschi, L.; Paolino, Davide Salvatore; Berutti, E.; Scotti, N.
  CLINICAL ORAL INVESTIGATIONS
  In: Titolo volume non avvalorato
  Springer
  6th biennial meeting of the European Federation of Conservative Dentistry (EFCD) held in association with the 33th national congress of the College National des Enseignants en Odontologie Conservatrice (CNEOC) (Paris) 9–11 May 2013
  Vol.17 pp.1 ISSN:1432-6981 DOI:10.1007/s00784-013-0943-1

• INTERACTION BETWEEN NANOFILLED COMPOSITES AND POLYWAVE MULTILED CURING LAMPS: AN IN VITRO STUDY
  Proceeding
  

  Battaglia, V.; Bergantin, E.; Paolino, Davide Salvatore; Coero Borga, F. A.; Cadenaro, M.; Breschi, L.; Berutti, E.; Scotti, N.
  In: Titolo volume non avvalorato
  Springer
  6th biennial meeting of the European Federation of Conservative Dentistry (EFCD) held in association with the 33th national congress of the College National des Enseignants en Odontologie Conservatrice (CNEOC) (Paris) 9–11 May 2013
  Vol.17 pp.1 DOI:10.1007/s00784-013-0943-1

• THE EFFECT OF NANO-HYBRID LOW-SHRINKAGE COMPOSITE ON CAVITIES WITH NON-SUPPORTED ENAMEL: A RANDOMIZED CLINICALTRIAL
  Proceeding
  

  Cuppari, M.; Alovisi, M.; Pasqualini, D.; Berutti, E.; Paolino, Davide Salvatore; Scotti, N.
  CLINICAL ORAL INVESTIGATIONS
  In: Titolo volume non avvalorato
  Springer
  6th biennial meeting of the European Federation of Conservative Dentistry (EFCD) held in association with the 33th national congress of the College National des Enseignants en Odontologie Conservatrice (CNEOC) (Paris) 9–11 May 2013
  Vol.17 pp.1 ISSN:1432-6981 DOI:10.1007/s00784-013-0943-1

• DIFFERENCE BETWEEN 2D AND 3D TECHNIQUES FOR EVALUATING SHAPING PERFORMANCE IN SIMULATED ROOT CANALS
  Proceeding
  

  Alovisi, M.; Paolino, Davide Salvatore; Chiandussi, Giorgio; Pasqualini, D.; Scotti, N.; Berutti, E.
  CLINICAL ORAL INVESTIGATIONS
  In: Titolo volume non avvalorato
  Springer
  6th biennial meeting of the European Federation of Conservative Dentistry (EFCD) held in association with the 33th national congress of the College National des Enseignants en Odontologie Conservatrice (CNEOC) (Paris) 9–11 May 2013
  Vol.17 pp.2 (pp.1072-1073) ISSN:1432-6981

• INFLUENCE OF CARBODIIMIDE CROSS-LINKING ON BOND STRENGTH TO RADICULAR DENTIN
  Proceeding
  

  Gregori, G.; Rota, R.; Mazzoni, A.; Breschi, L.; Paolino, Davide Salvatore; Berutti, E.; Scotti, N.
  CLINICAL ORAL INVESTIGATIONS
  In: Titolo volume non avvalorato
  Springer
  6th biennial meeting of the European Federation of Conservative Dentistry (EFCD) held in association with the 33th national congress of the College National des Enseignants en Odontologie Conservatrice (CNEOC) (Paris) 9–11 May 2013
  Vol.17 pp.1 ISSN:1432-6981

• PROVINI DI FATICA PER LA VALUTAZIONE DELL’EFFETTO SCALA IN CAMPO GIGACICLICO
  Proceeding
  

  Tridello, Andrea; Paolino, Davide Salvatore; Chiandussi, Giorgio; Rossetto, Massimo
  In: Titolo volume non avvalorato
  AIAS (Associazione Italiana per l'Analisi delle Sollecitazioni) (ITALIA)
  42° Convegno AIAS (Salerno) 11-14 Settembre 2013
  pp.7

• Dog-bone versus Gaussian gigacycle fatigue specimens for size effect evaluation
  Proceeding
  

  Tridello, Andrea; Paolino, Davide Salvatore; Chiandussi, Giorgio; Rossetto, Massimo
  CONVEGNO NAZIONALE IGF...
  In: Titolo volume non avvalorato
  GRUPPO ITALIANO FRATTURA (ITALIA)
  CONVEGNO IGF XXII (Roma) 1-3 Luglio 2013
  Vol.22 pp.8 (pp.23-30) ISSN:2281-1443 ISBN:9788895940472

• Thermal cycling of Crofer22APU-sealant-anode supported electrolyte joined structures for planar SOFCs up to 3000 h
  Article
  

  Smeacetto, Federico; Chrysanthou, A.; Moskalewicz, T.; Salvo, Milena
  MATERIALS LETTERS
  Elsevier
  Vol.111 pp.4 (pp.143-146) ISSN:0167-577X DOI:10.1016/j.matlet.2013.08.025i

• VISUALIZATION MODEL FOR PRODUCT LIFECYCLE MANAGEMENT
  Article
  

  Chiabert, Paolo; Lombardi, Franco; Martinez Gomez, J.; SAUZA BEDOLLA, Joel
  ANNALS OF THE FACULTY OF ENGINEERING HUNEDOARA
  University Politehnica TIMISOARA, Faculty of Engineering in HUNEDOARA
  Vol.XI pp.8 (pp.109-116) ISSN:1584-2665

• Effect of Environmental Exposure on the Fracture Properties of an Epoxy Adhesive
  Article
  

  Goglio, Luca; Rezaei, Mohsen
  JOURNAL OF ADHESION
  Lucas F.M. da Silva
  Vol.89 pp.15 (pp.807-821) ISSN:0021-8464 DOI:10.1080/00218464.2012.761569

• Effect of Different Substrate Pre-Treatments on the Resistance of Aluminum Joints to Moist Environments
  Article
  

  Goglio, Luca; Rezaei, Mohsen
  JOURNAL OF ADHESION
  Lucas F.M. da Silva
  Vol.89 pp.16 (pp.769-784) ISSN:0021-8464 DOI:10.1080/00218464.2012.759883

• A preliminary investigation into the physical and chemical properties of biomass ashes used as aggregate fillers for bituminous mixtures
  Article
  

  Melotti, Roberto; Santagata, Ezio; Bassani, Marco; Salvo, Milena; Rizzo, Stefano
  WASTE MANAGEMENT
  Elsevier Science Limited:Oxford Fulfillment Center, PO Box 800, Kidlington Oxford OX5 1DX United Kingdom:011 44 1865 843000, 011 44 1865 843699, EMAIL: asianfo@elsevier.com, tcb@elsevier.co.UK, INTERNET: http://www.elsevier.com, http://www.elsevier.com/locate/shpsa/, Fax: 011 44 1865 843010
  Vol.33 pp.12 (pp.1906-1917) ISSN:0956-053X DOI:10.1016/j.wasman.2013.05.015

• An experiment to test advanced materials impacted by intense proton pulses at CERN HiRadMat facility
  Article
  

  A., Bertarelli; E., Berthome; V., Boccone; Carra, Federico; F., Cerutti; N., Charitonidis; C., Charrondiere; A., Dallocchio; P., Fernandez Carmona; P., Francon; L., Gentini; M., Guinchard; N., Mariani; A., Masi; S. D., Marques dos Santos; P., Moyret; Peroni, Lorenzo; S., Redaelli; Scapin, Martina
  NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH. SECTION B, BEAM INTERACTIONS WITH MATERIALS AND ATOMS
  M. Breese, L.E. Rehn, C. Trautmann, I. Vickridge
  Vol.308 pp.12 (pp.88-99) ISSN:0168-583X DOI:10.1016/j.nimb.2013.05.007

• Post-curing conversion kinetics as functions of the irradiation time and increment thickness
  Article
  

  Scotti, N.; Venturello, Alberto; Coero Borga, F. A.; Pasqualini, D.; Paolino, Davide Salvatore; Geobaldo, Francesco; Berutti, E.
  JOURNAL OF APPLIED ORAL SCIENCE
  Faculdade de Odontologia de Bauru
  Vol.21 pp.6 (pp.190-195) ISSN:1678-7757 DOI:10.1590/1678-7757201302380

• Synthesis and characterization of SiO2 nano- and microwires by a non-catalytic technique
  Article
  

  Casalegno, Valentina; Rizzo, Stefano; Canavese, Giancarlo; Ventrella, Andrea; Salvo, Milena; Ferraris, Monica
  JOURNAL OF MATERIALS SCIENCE
  springer
  Vol.48 pp.7 (pp.6108-6114) ISSN:0022-2461 DOI:10.1007/s10853-013-7406-6

• Glasses and glass-ceramics as brazing materials for high-temperature applications
  Book chapter
  

  Salvo, Milena; Casalegno, Valentina; Rizzo, Stefano; Smeacetto, Federico; Ventrella, Andrea; Ferraris, Monica
  Advances in brazing: Science, technology and applications
  Woodhead Publishing (REGNO UNITO DI GRAN BRETAGNA)
  Vol.unico pp.20 (pp.525-544) ISBN:9780857094230 DOI:10.1533/9780857096500.3.525

• Microwave assisted combustion synthesis in the system Ti–Si–C for the joining of SiC: Experimental and numerical simulation results
  Article
  

  Rosa, R.; Veronesi, P.; Han, Shaohua; Casalegno, Valentina; Salvo, Milena; Colombini, E.; Leonelli, C.; Ferraris, Monica
  JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
  Elsevier
  Vol.33 pp.13 (pp.1707-1719) ISSN:0955-2219 DOI:10.1016/j.jeurceramsoc.2013.03.005

• Uncertainty in fatigue loading: Consequences on statistical evaluation of reliability in service
  Article
  

  Paolino, Davide Salvatore; Chiandussi, Giorgio; Belingardi, Giovanni
  PROBABILISTIC ENGINEERING MECHANICS
  Elsevier
  Vol.33 pp.9 (pp.38-46) ISSN:0266-8920 DOI:10.1016/j.probengmech.2013.02.001

• Modeling of Strain-Rate Behavior of a Lead-Antimony Alloy for Bullet Constructions
  Proceeding
  

  Peroni, Lorenzo; Scapin, Martina; Fichera, Claudio
  In: Analytical, computational and experimental Inelasticity in deformable solids
  Akhtar S. Khan (STATI UNITI D'AMERICA)
  19th International Symposium on Plasticity & its current applications (Nassau, Bahamas) 3-8 January 2013
  pp.3

• Mn1.5Co1.5O4 protective coating on Crofer22APU produced by thermal co-evaporation for SOFCs
  Article
  

  Ajitdoss, L. C.; Smeacetto, Federico; Bindi, M.; Beretta, D.; Salvo, Milena; Ferraris, Monica
  MATERIALS LETTERS
  Elsevier
  Vol.95 pp.4 (pp.82-85) ISSN:0167-577X DOI:10.1016/j.matlet.2012.12.079

• New glass-based coatings coloured with red pigments for Foamglas® panels
  Article
  

  Smeacetto, Federico; Galassi, S.; Ventrella, Andrea; Ferraris, Monica; Fontana, D.; Salvo, Milena
  JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
  Elsevier BV:PO Box 211, 1000 AE Amsterdam Netherlands:011 31 20 4853757, 011 31 20 4853642, 011 31 20 4853641, EMAIL: nlinfo-f@elsevier.nl, INTERNET: http://www.elsevier.nl, Fax: 011 31 20 4853598
  Vol.33 pp.7 (pp.1517-1523) ISSN:0955-2219 DOI:10.1016/j.jeurceramsoc.2012.12.001

• Thermomechanical warm forging of Ti–V, Ti–Nb, and Ti–B microalloyed medium carbon steels
  Article
  

  RUSSO SPENA, Pasquale; Firrao, Donato
  MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
  Elsevier
  Vol.560 pp.8 (pp.208-215) ISSN:0921-5093 DOI:10.1016/j.msea.2012.09.058

• Influence of the microstructure on fatigue and fracture toughness properties of large heat-treated mold steels
  Article
  

  Firrao, Donato; Matteis, Paolo; RUSSO SPENA, Pasquale; R., Gerosa
  MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
  Elsevier
  Vol.559 pp.13 (pp.371-383) ISSN:0921-5093 DOI:10.1016/j.msea.2012.08.113

• Sigmoidal crack growth rate curve: statistical modelling and applications
  Article
  

  Paolino, Davide Salvatore; Cavatorta, Maria Pia
  FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
  Wiley-Blackwell
  Vol.36 pp.11 (pp.316-326) ISSN:8756-758X DOI:10.1111/ffe.12001

• Performance of a glass-ceramic sealant in a SOFC short stack
  Article
  

  Smeacetto, Federico; Salvo, Milena; Santarelli, Massimo; Leone, Pierluigi; ORTIGOZA VILLALBA, GUSTAVO ADOLFO; Lanzini, Andrea; Ajitdoss, LAKSHMI CHANDRU; Ferraris, Monica
  INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
  Elsevier BV:PO Box 211, 1000 AE Amsterdam Netherlands:011 31 20 4853757, 011 31 20 4853642, 011 31 20 4853641, EMAIL: nlinfo-f@elsevier.nl, INTERNET: http://www.elsevier.nl, Fax: 011 31 20 4853598
  Vol.38 pp.9 (pp.588-596) ISSN:0360-3199 DOI:10.1016/j.ijhydene.2012.07.025

• A unified statistical model for S-N fatigue curves: probabilistic definition
  Article
  

  Paolino, Davide Salvatore; Chiandussi, Giorgio; Rossetto, Massimo
  FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
  Wiley-Blackwell
  Vol.36 pp.15 (pp.187-201) ISSN:8756-758X DOI:10.1111/j.1460-2695.2012.01711.x

• Erratum: Effect of canal length and curvature on working length alteration with waveOne reciprocating files
  Article
  

  Berutti, E.; Chiandussi, G.; Paolino, D. S.; Scotti, N.; Cantatore, G.; Castellucci, A.; Pasqualini, D.
  JOURNAL OF ENDODONTICS
  Elsevier
  Vol.38 pp.1 ISSN:0099-2399 DOI:10.1016/j.joen.2012.01.017

• Higher Rate and Impact Tests
  Book chapter
  

  Da Silva, Lucas F. M.; Adams, Robert D.; Blackman, Bamber R. K.; Goglio, Luca; Peroni, Marco; Sato, Chiaki; Dilger, Klaus; Frauenhofer, Michael; Kreling, Stefan
  Testing Adhesive Joints, Best Practices
  Wiley-VCH (GERMANIA)
  pp.45 (pp.273-317) ISBN:9783527329045 DOI:10.1002/9783527647026.ch4

• Influence of Microstructure on Crack Susceptibility of Large Chilled Iron Mill Rolls
  Proceeding
  

  Russo Spena, P.; DE MADDIS, Manuela; Lombardi, Franco
  In: INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2012, VOL 3, PTS A-C: DESIGN, MATERIALS, AND MANUFACTURING
  AMER SOC MECHANICAL ENGINEERS, THREE PARK AVENUE, NEW YORK, NY 10016-5990 USA
  ASME 2012 International Mechanical Engineering Congress and Exposition (Houston, Texas, USA) November 9–15, 2012
  Vol.3 pp.12 (pp.761-772) ISBN:9780791845196 DOI:10.1115/IMECE2012-89436

• Nuove prospettive per i biomateriali oculari impiantabili: rivestimenti antibatterici su dispositivi per oftalmoplastica
  Proceeding
  

  Baino, Francesco; Perero, Sergio; Miola, Marta; Ferraris, Sara; Verne', Enrica; Ferraris, Monica; A., Coggiola; D., Dolcino
  In: XXXVII Congresso SONO - Programma
  XXXVII Congresso Società Oftalmologica Nord-Occidentale (Camogli (GE)) 5-6 Ottobre 2012
  

• RECYCLING BIOMASS ASH INTO SUPPLEMENTARY CEMENTITIOUS MATERIALS (SCMs) THROUGH INNOVATIVE TECHNOLOGIES
  Proceeding
  

  Ferraris, Monica; Salvo, Milena; S., Rizzo; M., Caldirola; F., Canonico; M., Bianchi
  In: Titolo volume non avvalorato
  CISA Publisher, Italy
  FOURTH INTERNATIONAL SYMPOSIUM ON ENERGY FROM BIOMASS AND WASTE (San Servolo, Venice (Italy)) 12-15 November 2012
  pp.8 ISBN:9788862650069

• Sviluppo di generatori elettrochimici basati su tecnologia di cella a combustibile ad ossidi solidi
  Proceeding
  

  ORTIGOZA VILLALBA, GUSTAVO ADOLFO; Leone, Pierluigi; Lanzini, Andrea; Novaresio, Valerio; Santarelli, Massimo; Smeacetto, Federico; Salvo, Milena; Ferraris, Monica
  In: Titolo volume non avvalorato
  Giornate dell'Elettrochimica Italiana e Elettrochimica per il Recupero Ambientale (GEI-ERA 2012) (Santa Marina Salina (Me, Italia)) 17-22/06/2012
  ISBN:9788880801344

• Microbial ecology of space confined habitats and biofilm development on space materials: the project mars500 – MICHA
  Proceeding
  

  Francesco, Canganella; Giovanna, Bianconi; Elena Di, Mattia; Petra, Rettberg; Renato, Fani; Cesare, Lobascio; Perero, Sergio; Svetlana, Poddubko
  In: Titolo volume non avvalorato
  International Astronautical Congress, microgravity sciences and processes symposium (Italy (Napoli)) 1 - 5 October 2012
  

• Effect of thermal treatments on sputtered silver nanocluster/ silica composite coatings on soda-lime glasses: ionic exchange and antibacterial activity
  Article
  

  Ferraris, Monica; Ferraris, Sara; Miola, Marta; Perero, Sergio; Balagna, Cristina; Verne', Enrica; Gautier, G.; Manfredotti, C. h.; Battiato, A.; Vittone, E.; Speranza, G.; Bogdanovic, I.
  JOURNAL OF NANOPARTICLE RESEARCH
  Springer
  Vol.14 pp.19 ISSN:1388-0764 DOI:10.1007/s11051-012-1287-5

• Syntactic Iron Foams – On Deformation Mechanisms and Strain-Rate Dependence of Compressive Properties
  Article
  

  Peroni, Lorenzo; Scapin, Martina; Avalle, Massimiliano; Weise, Joerg; Lehmhus, Dirk; Baumeister, Joachim; Busse, Matthias
  ADVANCED ENGINEERING MATERIALS
  WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim (D)
  Vol.14 pp.10 (pp.909-918) ISSN:1438-1656 DOI:10.1002/adem.201200160

• Effetto degli elementi leganti sul trattamento di Kolsterizzazione di acciai inossidabili duplex
  Proceeding
  

  Ubertalli, Graziano; Frigo, M.; Bordiga, V.
  In: Atti del 34° Convegno nazionale
  AIM - Associazione Italiana di Metallurgia (ITALIA)
  34° Conv.Nazionale AIM (Trento) 7-9 novembre 2012
  pp.9 (pp.112-1-112-9)

• Silver nanocluster/silica composite coatings obtained by sputtering for antibacterial applications
  Proceeding
  

  Ferraris, Monica; Balagna, Cristina; Perero, Sergio; Miola, Marta; Ferraris, Sara; Baino, Francesco; A., Battiato; C., Manfredotti; E., Vittone; Verne', Enrica
  In: NANOSTRUC 2012 – Abstract book
  S. Sachse, J. Njuguna
  NANOSTRUC 2012 (Cranfield University, Bedfordshire (UK)) 2-4 Luglio 2012
  pp.1

• DEVELOPMENT OF METAL-DIAMOND COMPOSITES FOR LIGHT-WEIGHT ARMOUR
  Book chapter
  

  Scapin, Martina; Peroni, Lorenzo; S., Bizzaro
  Opportunities and Challenges of Light-Weight Armour
  Ezio Cadoni, Hanspeter Kaufmann
  pp.8 ISBN:9788875951207

• L’IMPIEGO DI ESTENSIMETRI A SEMICONDUTTORE IN PROVE AD ELEVATO STRAIN-RATE
  Proceeding
  

  Peroni, Lorenzo; Scapin, Martina
  In: Titolo volume non avvalorato
  41° Convegno Nazionale AIAS (Vicenza) 5-8 Settembre 2012
  pp.11

• PROBLEMATICHE NELLA SIMULAZIONE NUMERICA DI SCENARI DI IMPATTO BALISTICO
  Proceeding
  

  Peroni, Lorenzo; Scapin, Martina; Fichera, Claudio; M., Giglio; A., Gilioli; A., Manes
  In: Titolo volume non avvalorato
  41° Convegno Nazionale AIAS (Vicenza) 5-8 Settembre 2012
  pp.10

• Investigation about the influence of the mechanical properties of lead core and brass jacket of a NATO 7.62 mm ball bullet in numerical simulations of ballistic impacts
  Proceeding
  

  M., Giglio; A., Gilioli; A., Manes; Peroni, Lorenzo; Scapin, Martina
  In: Titolo volume non avvalorato
  EDP SCIENCES
  DYMAT 2012 - 10th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading (Freiburg, Germany) September 2nd-7th, 2012
  Vol.26 pp.5 DOI:10.1051/epjconf/20122604010

• Mechanical properties at high strain-rate of lead core and brass jacket of a NATO 7.62 mm ball bullet
  Proceeding
  

  Peroni, Lorenzo; Scapin, Martina; Fichera, Claudio; A. Manes M., Giglio
  In: Titolo volume non avvalorato
  EDP Sciences 2012
  DYMAT 2012 - 10th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading (Freiburg, Germany) September 2nd-7th, 2012
  pp.6

• STATISTICAL MODEL FOR GIGACYCLE S-N FATIGUE CURVES: PARAMETER ESTIMATION
  Proceeding
  

  Paolino, Davide Salvatore; Chiandussi, Giorgio; Rossetto, Massimo; Hobson, L.
  In: Titolo volume non avvalorato
  International Conference on Fatigue Damage of Structural Materials IX (Hyannis, MA, USA) 16-21 September 2012
  

• SVILUPPO DI UNA MACCHINA A ULTRASUONI PER PROVE DI FATICA GIGACICLICA
  Proceeding
  

  Paolino, Davide Salvatore; Rossetto, Massimo; Chiandussi, Giorgio; Tridello, Andrea
  In: Titolo volume non avvalorato
  41° CONVEGNO NAZIONALE AIAS (Vicenza) 5-8 SETTEMBRE 2012
  pp.7

• GIUNTO TUBOLARE INCOLLATO: RICERCA DI UNA SOLUZIONE ESPLICITA
  Proceeding
  

  Goglio, Luca; Paolino, Davide Salvatore
  In: Titolo volume non avvalorato
  41° CONVEGNO NAZIONALE AIAS (Vicenza) 5-8 SETTEMBRE 2012
  pp.10

• MODELLI PROBABILISTICI PER CURVE S-N IN REGIME GIGACICLICO
  Proceeding
  

  Paolino, Davide Salvatore; Rossetto, Massimo; Chiandussi, Giorgio
  In: Titolo volume non avvalorato
  41° CONVEGNO NAZIONALE AIAS (Vicenza) 5-8 SETTEMBRE 2012
  pp.9

• Silver nanoclusters-silica composite layers: antibacterical coatings from hospital to space
  Proceeding
  

  Ferraris, Monica; Perero, Sergio; Ferraris, Sara; Miola, Marta; Baino, Francesco; Balagna, Cristina; Battiato, A.; Manfredotti, C.; Vittone, E.; Verne', Enrica
  In: V International Workshop on Oxide Based Materials & AIZ Day 2012 - Book of Abstract
  OXIDES 2012 (Torino) 23-27 Settembre 2012
  pp.1

• High-Strain-Rate Testing of Adhesive Specimens and Joints by Hopkinson Bar Technique
  Book chapter
  

  Goglio, Luca; Peroni, Marco
  Testing Adhesive Joints - Best Practices
  WILEY-VCH Verlag (GERMANIA)
  pp.9 (pp.289-297) ISBN:9783527329045

• Silver nanocluster/silica composite coatings obtained by sputtering for antibacterial applications
  Proceeding
  

  Ferraris, Monica; Balagna, Cristina; Perero, Sergio; Miola, Marta; Ferraris, Sara; Baino, Francesco; Battiato, A.; Manfredotti, C.; Vittone, E.; Verne', Enrica
  IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING
  In: Titolo volume non avvalorato
  IOP Publishing Ltd
  International Conference on Structural Nano Composites, NANOSTRUC 2012 (Bedfordshire (UK)) 2-4 July 2012
  Vol.40 pp.6 ISSN:1757-899X DOI:10.1088/1757-899X/40/1/012037

• Design and in-house development of solid oxide fuel cell (SOFC) stacks for dealing with multiple fuels
  Book
  

  Santarelli, Massimo; CALI' QUAGLIA, Michele; Lanzini, Andrea; Leone, Pierluigi; Novaresio, Valerio; ORTIGOZA VILLALBA, GUSTAVO ADOLFO; Salvo, Milena; Ferraris, Monica; Smeacetto, Federico; Spinelli, Paolo; Zerbinati, Orfeo; Ginocchio, S; Beretta, D.
  EDIZIONI POLITEKO (ITALIA)
  pp.124 (pp.1-124) ISBN:9788897862024

• Re-use of ashes from the combustion of municipal solid waste and biomass in bituminous mixtures
  Proceeding
  

  Melotti, Roberto; Santagata, Ezio; Bassani, Marco; Baglieri, Orazio; Ferraris, Monica; Salvo, Milena; Rizzo, Stefano
  In: Titolo volume non avvalorato
  CISA Publisher (ITALIA)
  FOURTH INTERNATIONAL SYMPOSIUM ON ENERGY FROM BIOMASS AND WASTE (San Servolo, Venice (Italy)) 12-15 Novembre 2012
  pp.8 ISBN:9788862650069

• Effect of different substrate pre-treatments on the resistance to moist environment
  Proceeding
  

  Goglio, Luca; Rezaei, Mohsen
  In: Titolo volume non avvalorato
  ACE-X 2012 (Istanbul (TR)) 1-4 July, 2012
  pp.1

• Effect of environmental exposure on the fracture properties of an epoxy adhesive
  Proceeding
  

  Goglio, Luca; Rezaei, Mohsen
  In: Titolo volume non avvalorato
  ACE-X 2012 (Istanbul (TR)) 1-4 July, 2012
  pp.1

• INVESTIGATION OF THE MECHANICAL BEHAVIOUR OF METAL-DIAMOND COMPOSITES
  Proceeding
  

  Scapin, Martina; Peroni, Lorenzo; A., Bertarelli; Dallocchio, Alessandro; N., Mariani; S., Bizzarro
  In: Titolo volume non avvalorato
  ECCM15 - 15TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS (Venice, Italy) 24-28 June 2012
  pp.8

• HIGH STRAIN-RATE MECHANICAL BEHAVIOUR OF A COPPER MATRIX COMPOSITE FOR NUCLEAR APPLICATIONS
  Proceeding
  

  Peroni, Lorenzo; Scapin, Martina
  In: Titolo volume non avvalorato
  ECCM15 - 15TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS (Venice, Italy) 24-28 June 2012
  pp.8

• Characterization of New Glass Coated Foam GlassInsulating Tiles by Standard Tests
  Article
  

  Ventrella, Andrea; Smeacetto, Federico; Salvo, Milena; Ferraris, Monica
  JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  Springer
  Vol.21 pp.9 (pp.2380-2388) ISSN:1059-9495 DOI:10.1007/s11665-012-0164-9

• Smart biomaterials with tailored properties
  Proceeding
  

  Baino, Francesco; Balagna, Cristina; Bruno, Matteo; Ferraris, Monica; Ferraris, Sara; Gallo, Marta; Miola, Marta; Novajra, Giorgia; Pan, Guanjun; Perero, Sergio; Spriano, Silvia Maria; Tallia, Francesca; Verne', Enrica; VITALE BROVARONE, Chiara; Zhang, Xin
  In: Congresso Nazionale di Bioingegneria 2012 - Atti
  PATRON EDITORE (ITALIA)
  Terzo Congresso Gruppo Nazionale di Bioingegneria (Roma) 26-28 Giugno 2012
  pp.2

• PRESSURE-LESS JOINING OF CERAMIC MATRIX COMPOSITES
  Proceeding
  

  Salvo, Milena; Casalegno, Valentina; Rizzo, Stefano; Ventrella, Andrea; S., Novak; K., Handrick; Ferraris, Monica
  In: Proceedings of the 15th European Conference on Composite Materials
  15th European Conference on Composite Materials (Venice) 24-28 June 2012
  Vol.unico pp.8 (pp.1-8)

• Rivestimenti e trattamenti superficiali per impartire proprietà antibatteriche a dispositivi per oftalmoplastica
  Patent
  

  Baino, Francesco; Perero, Sergio; Miola, Marta; Ferraris, Sara; Verne', Enrica; Ferraris, Monica
  N.0001412705

• Dynamic mechanical behavior of syntactic iron foams with glass microspheres
  Article
  

  Peroni, Lorenzo; Scapin, Martina; Avalle, Massimiliano; Jörg, Weise; Dirk, Lehmhus
  MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
  ELSEVIER
  pp.12 ISSN:0921-5093 DOI:10.1016/j.msea.2012.05.053

• Antibacterial coating on polymer for space application
  Article
  

  Balagna, Cristina; Perero, Sergio; Ferraris, Sara; Miola, Marta; Fucale, G.; Manfredotti, C.; Battiato, A.; Santella, D.; Verne', Enrica; Vittone, E.; Ferraris, Monica
  MATERIALS CHEMISTRY AND PHYSICS
  Elsevier
  Vol.135 pp.9 (pp.714-722) ISSN:0254-0584 DOI:10.1016/j.matchemphys.2012.05.049

• DEVELOPMENT OF INNOVATIVE OPTICAL GLASSES FOR PHOTONICS AT POLITECNICO DI TORINO : NOVEL SILICA AND TELLURITE GLASSES
  Proceeding
  

  Bourhis, Kevin; Ferraris, Monica; Milanese, Daniel; Chen, Qiuping; Perero, Sergio; Lousteau, Joris; Mura, Emanuele; Negro, Davide; Boetti, NADIA GIOVANNA; Scarpignato, GERARDO CRISTIAN
  In: delle Tecnologie Fotoniche
  AEIT (ITALIA)
  Fotonica 2012, 14° Convegno Nazionale delle Tecnologie Fotoniche (Firenze) 15-17 maggio 2012
  pp.3 (pp.1-3)

• Effects of neutron irradiation on glass ceramics as pressure-less joining materials for SiC based components for nuclear applications
  Article
  

  Ferraris, Monica; Casalegno, Valentina; Rizzo, Stefano; Salvo, Milena; Van Staveren, T. O.; Matejicek, J.
  JOURNAL OF NUCLEAR MATERIALS
  Vol.429 pp.7 (pp.166-172) ISSN:0022-3115 DOI:10.1016/j.jnucmat.2012.05.035

• Torsional Shear Strength of Silicon CarbideComponents Pressurelessly Joined by a Glass-Ceramic
  Article
  

  Ferraris, Monica; Salvo, Milena; Rizzo, Stefano; Casalegno, Valentina; Han, Shaohua; Ventrella, Andrea; Hinoki, T.; Katoh, Y.
  INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY
  Vol.9 pp.9 (pp.786-794) ISSN:1546-542X DOI:10.1111/j.1744-7402.2012.02775.x

• Comparative evaluation of the enamel margins roughness obtained with different finishing devices
  Article
  

  Scotti, N.; Bregola, A.; Chiandussi, Giorgio; Paolino, Davide Salvatore; Pasqualini, D.; Berutti, E.
  MINERVA STOMATOLOGICA
  Edizioni Minerva Medica S.p.A.
  Vol.61 pp.9 (pp.1-9) ISSN:0026-4970

• Thermal fatigue characterization of CFC divertor modules using a one step brazing process
  Article
  

  Pintsuk, G.; Casalegno, Valentina; Ferraris, Monica; Koppitz, T.; Salvo, Milena
  JOURNAL OF NUCLEAR MATERIALS
  Elsevier
  Vol.426 pp.7 (pp.78-84) ISSN:0022-3115 DOI:10.1016/j.jnucmat.2012.03.021

• Dynamic response analysis of thermoplastic polyurethane
  Book chapter
  

  Fontanari, V.; Avalle, Massimiliano; Migliaresi, C.; Peroni, Lorenzo; Monelli, B. D.
  Materials with Complex Behaviour II
  Springer-Verlag (GERMANIA)
  Vol.16 pp.18 (pp.337-354) ISBN:9783642226991 DOI:10.1007/978-3-642-22700-4_20

• Surface modification of carbon/carbon composites to improve their wettability by copper
  Article
  

  Casalegno, Valentina; Salvo, Milena; Ferraris, Monica
  CARBON
  elsevier
  Vol.50 pp.11 (pp.2296-2306) ISSN:0008-6223 DOI:10.1016/j.carbon.2012.01.049

• Canal shaping with WaveOne Primary reciprocating files and ProTaper system: a comparative study
  Article
  

  Berutti, E.; Chiandussi, Giorgio; Paolino, Davide Salvatore; Scotti, N.; Cantatore, G.; Castellucci, A.; Pasqualini, D.
  JOURNAL OF ENDODONTICS
  Elsevier
  Vol.38 pp.5 (pp.505-509) ISSN:0099-2399 DOI:10.1016/j.joen.2011.12.040

• Computed micro-tomographic evaluation of glide pathwith nickel-titanium rotary pathFile in maxillary firstmolars curved canals
  Article
  

  Pasqualini, D.; Bianchi, C. C.; Paolino, Davide Salvatore; Mancini, L.; Cemenasco, A.; Cantatore, G.; Castellucci, A.; Berutti, E.
  JOURNAL OF ENDODONTICS
  Elsevier
  Vol.38 pp.5 (pp.389-393) ISSN:0099-2399 DOI:10.1016/j.joen.2011.11.011

• Effects induced by LHC high energy beam in copper structures
  Article
  

  Scapin, Martina; Peroni, Lorenzo; Dallocchio, Alessandro
  JOURNAL OF NUCLEAR MATERIALS
  S. Ishino , R.J.M. Konings , L.K. Mansur , T. Muroga , L. Werme
  Vol.Volume 420 pp.10 (pp.463-472) ISSN:0022-3115 DOI:10.1016/j.jnucmat.2011.10.036

• Torsion tests on AV119 epoxy - joined SiC
  Article
  

  Ferraris, Monica; Salvo, Milena; Casalegno, Valentina; Avalle, Massimiliano; Ventrella, Andrea
  INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY
  Wiley
  Vol.9 pp.9 (pp.786-794) ISSN:1546-542X DOI:10.1111/j.1744-7402.2011.02740.x

• Shear and bending strength of SiC/SiC joined by a modified commercial adhesive
  Article
  

  Salvo, Milena; Rizzo, Stefano; Casalegno, Valentina; Handrick, K.; Ferraris, Monica
  INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY
  Wiley
  Vol.9 pp.8 (pp.778-785) ISSN:1546-542X DOI:10.1111/j.1744-7402.2011.02739.x

• Parameters identification in strain-rate and thermal sensitive visco-plastic material model for an alumina dispersion strengthened copper
  Article
  

  Scapin, Martina; Peroni, Lorenzo; Peroni, Marco
  INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
  M. Langseth
  Vol.Volumes 40-41 pp.10 (pp.58-67) ISSN:0734-743X DOI:10.1016/j.ijimpeng.2011.10.002

• Durable Glass-Ceramic Coatings for Foam Glass
  Article
  

  Smeacetto, Federico; Salvo, Milena; Ventrella, Andrea; Rizzo, Stefano; Ferraris, Monica
  INTERNATIONAL JOURNAL OF APPLIED GLASS SCIENCE
  Wiley
  Vol.3 pp.6 (pp.69-74) ISSN:2041-1286 DOI:10.1111/j.2041-1294.2011.00071.x

• Root canal anatomy preservation of WaveOne reciprocating files with or without glide path
  Article
  

  Berutti, E.; Paolino, Davide Salvatore; Chiandussi, Giorgio; Alovisi, M.; Cantatore, G.; Castellucci, A.; Pasqualini, D.
  JOURNAL OF ENDODONTICS
  Elsevier
  Vol.38 pp.4 (pp.101-104) ISSN:0099-2399 DOI:10.1016/j.joen.2011.09.030

• Shockwaves simulation of accidental particle beam impacts in LHC metal structures
  Proceeding
  

  Scapin, Martina; Peroni, Lorenzo; Vittorio, Boccone; Carra, Federico
  In: Proceeding of 8th European LS-DYNA Conference
  8th European LS-DYNA Conference (Strasburgo (Francia)) 23-24 maggio 2011
  pp.9

• Continuous Innovativeness Supported by Integrated Computer-based and PLM Solutions
  Proceeding
  

  Anisic, Z.; Chiabert, Paolo; Gecevska, V. Kajmakoska B.; Lombardi, Franco
  In: Titolo volume non avvalorato
  -
  XV International Scientific Conference on Industrial Systems (Novi Sad, Serbia) September 14-16, 2011
  pp.6 (pp.461-466)

• Effects of artificial aging on surface roughness of resin composites
  Proceeding
  

  Bergantin, E.; Chiandussi, Giorgio; Paolino, Davide Salvatore; Marchesi, G.; Breschi, L.; Berutti, E.; Scotti, N.
  CLINICAL ORAL INVESTIGATIONS
  In: Titolo volume non avvalorato
  Springer
  5th biennial meeting of the European Federation of Conservative Dentistry (EFCD) held in association with the 6th international congress of the Society of Restorative Dentistry (Istanbul) 13–15 October 2011
  Vol.15 pp.1 ISSN:1432-6981 DOI:10.1007/s00784-011-0607-y

• Continuous innovativenenss supported by integrated computer-based and PLM solutions
  Article
  

  Kajmakoska, Bisera; Lombardi, Franco; Chiabert, Paolo; Anisic, Z.; Gecevska, V.
  ACTA TECHNICA CORVINIENSIS
  FACULTY OF ENGINEERING HUNEDOARA UNIVERSITY POLITEHNICA TIMISOARA
  Vol.V pp.6 (pp.41-46) ISSN:2067-3809

• Euro Nano Forum 2011: NANOSTRUCTURED ANTISEPTICAL COATINGS (NASLA): ANTIBACTERIAL PROPERTIES OF SILICA COATINGS CONTAINING SILVER NANOCLUSTER
  Other
  

  Ferraris, Monica; Perero, Sergio; Ferraris, Sara; Miola, Marta; Verne', Enrica
  

• I meccanismi fisici della fatica
  Book chapter
  

  Firrao, Donato; Rossetto, Massimo
  Tenacità e resistenza a fatica delle leghe metalliche
  AIM - Associazione Italiana di Metallurgia (ITALIA)
  pp.31 (pp.31-61) ISBN:9788885298866

• Evaluation of residual stresses in carbon/carbon composites components joined to copper before and after pulse electromagnetic treatment
  Article
  

  Stepanov, G. V.; Babutskii, A. I.; Mameev, I. A.; Ferraris, Monica; Casalegno, Valentina; Salvo, Milena
  STRENGTH OF MATERIALS
  Springer Science+Business Media, Inc.
  Vol.Vol. 43, No. 6 pp.8 (pp.637-644) ISSN:0039-2316

• Characterization of highly hardened surface layers on austenitic stainless steels.
  Article
  

  Ubertalli, Graziano; Mortarino, GIOVANNI MARCO MARIA; Firrao, Donato
  JOURNAL OF ASTM INTERNATIONAL
  American Institute of Physics
  Vol.8 pp.9 ISSN:1546-962X DOI:10.1520/JAI103172

• Metodi di indagine negli incidenti aerei ed esame dei casi Ustica/Mattei
  Book chapter
  

  Firrao, Donato; Ubertalli, Graziano
  Ingegneria forense : metodologie, protocolli, casi studio
  Flaccovio (ITALIA)
  pp.42 (pp.361-402) ISBN:9788857901015

• Joining and integration issues of ceramic matrix composites for the nuclear industry
  Book chapter
  

  Ferraris, Monica; Salvo, Milena; Casalegno, Valentina
  Ceramic Integration and Joining Technologies: From Macro to Nanoscale
  John Wiley & Sons Inc
  pp.51 (pp.39-89) ISBN:9780470391228

• Characterization of ash from biomass combustion for its use as filler in asphalt mixtures
  Proceeding
  

  Melotti, Roberto; Santagata, Ezio; Bassani, Marco; Salvo, Milena; Rizzo, Stefano
  In: Titolo volume non avvalorato
  CISA Publisher (ITALIA)
  Sardinia 2011 Symposium - XIII international waste management and landfill symposium (Santa Margherita di Pula (IT)) 3-7 October 2011
  pp.8 ISBN:9788862650007

• Shock loads induced on metal structures by LHC proton beams: modelling of thermo-mechanical effects
  Book chapter
  

  Scapin, Martina; Peroni, Lorenzo; Dallocchio, Alessandro; A., Bertarelli
  Performance, protection and strengthening of structures under extreme loading
  Trans Tech Publications
  Vol.Applied Mechanics and Materials, 82 pp.6 ISBN:9783037852170

• HIGH ENERGY BEAM IMPACTS ON BEAM INTERCEPTING DEVICES: ADVANCED NUMERICAL METHODS AND EXPERIMENTAL SET-UP
  Proceeding
  

  A., Bertarelli; V., Boccone; Carra, Federico; F., Cerutti; Dallocchio, Alessandro; N., Mariani; M., Timmins; Peroni, Lorenzo; Scapin, Martina
  In: Titolo volume non avvalorato
  IPAC2011 (San Sebastian (ES)) 4-9 september
  pp.3 ISBN:9789290833666

• Dynamic mechanical behaviour of syntactic iron foams with micro glass bubbles
  Proceeding
  

  Peroni, Lorenzo; Scapin, Martina; Avalle, Massimiliano; J., Weise; D., Lehmhus
  In: Titolo volume non avvalorato
  3rd International Conference on Impact Loading of Lightweight Structures (Valenciennes) 28 June - 1 July
  pp.2

• PROGETTO DI UN MOTOCICLO PER LA COMPETIZIONE MOTOSTUDENT
  Proceeding
  

  M., Furno; Peroni, Lorenzo; Soma', Aurelio; Bosso, Nicola
  In: Atti del 40° Convegno Nazionale ASSOCIAZIONE ITALIANA PER L’ANALISI DELLE SOLLECITAZIONI
  AIAS2011 (Palermo) 7-10 settembre
  pp.10 ISBN:9788895272856

• CARATTERIZZAZIONE E MODELLAZIONE AD ELEVATO STRAIN-RATE DI UNA LEGA DI ALLUMINIO
  Proceeding
  

  Peroni, Lorenzo; Scapin, Martina; D., Lumassi; A., Manes; M., Giglio
  In: Atti 40° Convegno nazionale ASSOCIAZIONE ITALIANA PER L’ANALISI DELLE SOLLECITAZIONI
  AIAS2011 (Palermo) 7-10 settembre
  pp.10 ISBN:9788895272856

• THERMO-MECHANICAL MODELLING OF DYNAMIC TENSILE EXTRUSION TEST
  Proceeding
  

  Peroni, Lorenzo; Scapin, Martina; Avalle, Massimiliano
  In: Titolo volume non avvalorato
  Coupled Problems 2011 - IV International Conference on Computational Methods for Coupled Problems in Science and Engineering 20-22 June
  pp.12 ISBN:9788487867590

• Numerical Simulations of Tungsten Targets Hit by LHC Proton Beam
  Proceeding
  

  Scapin, Martina; Peroni, Lorenzo; A., Bertarelli; Dallocchio, Alessandro
  In: Titolo volume non avvalorato
  Coupled Problems 2011 - Computational Methods for Coupled Problems in Science and Engineering IV (Kos) 20-22 June
  pp.12 ISBN:9788487867590

• Analysis of strain rate behavior of an Al 6061 T6 alloy
  Proceeding
  

  A., Manes; Peroni, Lorenzo; Scapin, Martina; M., Giglio
  PROCEDIA ENGINEERING
  In: Titolo volume non avvalorato
  Elsevier
  11th International Conference on the Mechanical Behavior of Materials (ICM11) (Milano) 5-9 giugno 2011
  Vol.10 pp.6 (pp.3477-3482) ISSN:1877-7058 DOI:10.1016/j.proeng.2011.04.573

• Damage evaluation in metal structures subjected to high energy deposition due to particle beams
  Proceeding
  

  Scapin, Martina; Peroni, Lorenzo; Dallocchio, Alessandro
  JOURNAL OF PHYSICS. CONFERENCE SERIES
  In: Titolo volume non avvalorato
  9th International Conference on Damage Assessment of Structures (DAMAS2011) (Oxford (UK)) 11-13 Luglio 2011
  Vol.305 pp.10 ISSN:1742-6588 DOI:10.1088/1742-6596/305/1/012062

• Numerical Analysis of Hybrid Joining in Car BodyApplications
  Article
  

  Scattina, Alessandro; Peroni, Lorenzo; Peroni, Marco; Avalle, Massimiliano
  JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
  Vol.25 pp.25 (pp.2409-2433) ISSN:0169-4243 DOI:10.1163/016942411X580117

• Surface functionalization of Ag-nanoclusters-silica composite films for biosensing
  Article
  

  Ferraris, Sara; Perero, Sergio; Verne', Enrica; Battistella, E.; Rimondini, L.; Ferraris, Monica
  MATERIALS CHEMISTRY AND PHYSICS
  Elsevier
  Vol.130 pp.10 (pp.1307-1316) ISSN:0254-0584 DOI:10.1016/j.matchemphys.2011.09.019

• Effect of Canal Length and Curvature on Working Length Alteration with WaveOne Reciprocating Files
  Article
  

  Berutti, E.; Chiandussi, Giorgio; Paolino, Davide Salvatore; Scotti, N.; Cantatore, G.; Castellucci, A.; Pasqualini, D.
  JOURNAL OF ENDODONTICS
  Elsevier
  Vol.37 pp.4 (pp.1687-1690) ISSN:0099-2399 DOI:10.1016/j.joen.2011.09.014

• Chapter 21 - Impact tests
  Book chapter
  

  Goglio, Luca
  Handbook of adhesion technology
  Springer
  Vol.1 pp.30 (pp.503-532) ISBN:9783642011689 DOI:10.1007/978-3-642-01169-6_21

• An analytical study of the tubular bonded joint under axial loading
  Proceeding
  

  Goglio, Luca; Dragoni, Eugenio
  In: Book of abstracts (on CD-ROM)
  AB 2011 - International Conference on Structural Adhesive Bonding (Porto (Portugal)) 7-8 July 2011
  pp.1

• Moisture degradation of open-faced single lap joints
  Proceeding
  

  Rezaei, Mohsen; Goglio, Luca; Rossetto, Massimo
  In: Book of abstracts (on CD-ROM)
  AB 2011 - International Conference on Structural Adhesive Bonding (Porto (Portugal)) 7-8 July 2011
  pp.1

• Variation of the elastic constants of an epoxy adhesive exposed to warm moisture
  Proceeding
  

  Rezaei, Mohsen; Goglio, Luca; Rossetto, Massimo
  In: Book of abstracts (on CD-ROM)
  AB 2011 - International Conference on Structural Adhesive Bonding (Porto (Portugal)) 7-8 July, 2011
  pp.1

• Investigation of influence of tab types on tensile strength of E-glass/epoxy fiber reinforced composite materials
  Article
  

  Belingardi, Giovanni; Paolino, Davide Salvatore; Koricho, ERMIAS GEBREKIDAN
  PROCEDIA ENGINEERING
  Elsevier
  Vol.10 pp.6 (pp.3279-3284) ISSN:1877-7058 DOI:10.1016/j.proeng.2011.04.541

• LIMITS FOR BEAM INDUCED DAMAGE: RECKLESS OR TOO CAUTIOUS?
  Proceeding
  

  A., Bertarelli; V., Boccone; Carra, Federico; F., Cerutti; Dallocchio, Alessandro; N., Mariani; Peroni, Lorenzo; Scapin, Martina
  In: Titolo volume non avvalorato
  C. Carli
  Proceedings of Chamonix 2011 workshop on LHC performance (Chamonix (F)) 24-28 gennaio 2011
  

• THERMO-MECHANICAL MODELLING OF METAL STRUCTURES SUBJECTED TO HIGH ENERGY PARTICLE BEAM IMPACTS
  Proceeding
  

  Peroni, Lorenzo; Scapin, Martina; Dallocchio, Alessandro
  In: Titolo volume non avvalorato
  PLASTICITY 2011 - THE INTERNATIONAL SYMPOSIUM ON PLASTICITY (Puerto Vallarta (Mexico)) 3-8 gennaio 2011
  pp.3

• Precision of the one-dimensional solutions for bonded double lap joints
  Article
  

  Goglio, Luca; Rossetto, Massimo
  INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
  Elsevier
  Vol.31 pp.14 (pp.301-314) ISSN:0143-7496 DOI:10.1016/j.ijadhadh.2010.10.004

• Measurement of longitudinal and transverse strain in an aluminium foam
  Article
  

  Goglio, Luca; MANFREDINI VASSOLER, Jakson; Peroni, Marco
  MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK
  Joerg Ellermeier
  Vol.42 pp.8 (pp.342-349) ISSN:0933-5137 DOI:10.1002/mawe.201100786

• Blind separation of manufacturing variability with independent component analysis: a convolutive approach
  Article
  

  Gandini, Martina; Lombardi, Franco; Vaccarino, Francesco
  EXPERT SYSTEMS WITH APPLICATIONS
  Elsevier
  Vol.38 pp.7 (pp.9939-9946) ISSN:0957-4174 DOI:10.1016/j.eswa.2011.02.036

• Thermal cycling and ageing of a glass-ceramic sealant for planar SOFCs
  Article
  

  Smeacetto, Federico; Chrysanthou, A.; Salvo, Milena; Moskalewicz, T.; D’Herin Bytner, F.; Ajitdoss, L. C.; Ferraris, Monica
  INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
  Elsevier
  Vol.36 pp.9 (pp.11895-11903) ISSN:0360-3199 DOI:10.1016/j.ijhydene.2011.04.083

• Joining of SiC-based materials for nuclear energy applications
  Article
  

  Ferraris, Monica; Salvo, Milena; Casalegno, Valentina; Han, Shaohua; Katoh, Y.; Jung, H. C.; Hinoki, T.; Kohyama, A.
  JOURNAL OF NUCLEAR MATERIALS
  Elsevier BV
  Vol.417 pp.4 (pp.379-382) ISSN:0022-3115 DOI:10.1016/j.jnucmat.2010.12.160

• Performance and testing of joined Crofer22APU-glass-ceramic sealant-anode supported cell in SOFC relevant conditions
  Article
  

  Smeacetto, Federico; Salvo, Milena; Leone, Pierluigi; Santarelli, Massimo; Ferraris, Monica
  MATERIALS LETTERS
  Elsevier BV
  Vol.65 pp.5 (pp.1048-1052) ISSN:0167-577X DOI:10.1016/j.matlet.2010.12.050

• Experimental Evaluation of Planar SOFC single unit cell with Crofer22APU plate assembly
  Article
  

  Leone, Pierluigi; Lanzini, Andrea; Delhomme, Baptiste; ORTIGOZA VILLALBA, GUSTAVO ADOLFO; Santarelli, Massimo; Smeacetto, Federico; Salvo, Milena; Ferraris, Monica
  JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY
  ASME
  Vol.8 pp.8 ISSN:1550-624X DOI:10.1115/1.4003227

• A new glass coating for foam glass
  Article
  

  Ventrella, Andrea; Smeacetto, Federico; Salvo, Milena; Ferraris, Monica
  INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY
  BLACKWELL PUBLISHING, 9600 GARSINGTON RD, OXFORD, ENGLAND, OXON, OX4 2DQ
  Vol.8 pp.7 (pp.187-193) ISSN:1546-542X DOI:10.1111/j.1744-7402.2009.02426.x

• Residual Stresses in a Cu–CFC Component for Thermonuclear Application: Numerical Prediction and Experimental Evaluation Using an Indentation Technique
  Article
  

  Bolzon, G.; Chiarullo, E. J.; Casalegno, Valentina; Salvo, Milena
  STRAIN
  Vol.47 pp.10 (pp.e474-e483) ISSN:0039-2103 DOI:10.1111/j.1475-1305.2009.00641.x

• X-ray photoelectron spectroscopy, high-resolution X-ray diffraction and refractive index analyses of Ti-doped lithium niobate (Ti:LiNbO3) nonlinear optical single crystal
  Article
  

  Kumar, P.; Moorthy Babu, S.; Perero, S.; Sai, R. L.; Bhaumik, I.; Ganesamoorthy, S.; Karnal, A. K.
  PRAMANA-JOURNAL OF PHYSICS
  INDIAN ACAD SCIENCES
  Vol.75 pp.6 (pp.1035-1040) ISSN:0304-4289 DOI:10.1007/s12043-010-0159-8

• On plastic notch effects in quenched and tempered steels
  Other
  

  RUSSO SPENA, Pasquale; Firrao, D.; Matteis, Paolo
  

• Numerical analysis of hybrid joining in car body applications
  Proceeding
  

  Avalle, Massimiliano; Peroni, Lorenzo; Peroni, Marco; Scattina, Alessandro
  In: Titolo volume non avvalorato
  ACE-X 2010 (Paris (F)) 8-9 luglio 2010
  

• Thermo-mechanical modelling of high energy particle beam impacts
  Proceeding
  

  Scapin, Martina; Peroni, Lorenzo; Dallocchio, Alessandro
  In: Titolo volume non avvalorato
  ACE-X 2010 (Paris (F)) 8-9 luglio 2010
  

• X-ray photoelectron spectroscopy, high-resolution X-ray diffraction and refractive index analyses of Ti-doped lithium niobate (Ti:LiNbO3) nonlinear optical single crystal
  Article
  

  Kumar, P.; Moorthy Babu, S.; Perero, Sergio; Say, L. R.; Bhaumik, I.; Ganesamoorthy, S.; Karnal, A. K.
  PRAMANA-JOURNAL OF PHYSICS
  Vol.75 pp.6 (pp.1035-1040) ISSN:0304-4289

• Product lifecycle management through innovative and competitive business environment
  Article
  

  Gecevska, V.; Chiabert, Paolo; Anisic, Z.; Lombardi, Franco; Cus, F.
  JOURNAL OF INDUSTRIAL ENGINEERING AND MANAGEMENT
  Vol.3 pp.14 (pp.323-336) ISSN:2013-0953 DOI:10.3926/jiem.2010.v3n2.p323-336

• Analisi della stabilità al fronte di scavo di gallerie di grande sezione (Cap. 13)
  Proceeding
  

  Bonini, Mariacristina; Barla, Giovanni Battista; Lombardi, Franco
  In: Problemi di stabilità nelle opere geotecniche
  Patron
  MIR 2010, XIII ciclo di conferenze di meccanica e ingegneria delle rocce (Torino) 30 novembre - 1 dicembre 2010
  pp.20 (pp.267-286) ISBN:9788855531023

• Identification of strain-rate and thermal sensitive material model with an inverse method
  Proceeding
  

  Peroni, Lorenzo; Scapin, Martina; Peroni, Marco
  In: Titolo volume non avvalorato
  EPJ Web of Conferences
  ICEM14 (Poitiers, France) 4-9 July 2010
  Vol.6 pp.8 ISBN:9782759805655 DOI:10.1051/epjconf/20100639004

• MODELLAZIONE DI STRUTTURE SOGGETTE A SHOCK TERMO-MECCANICI INDOTTI DA FASCI DI PARTICELLE AD ALTA ENERGIA
  Proceeding
  

  Scapin, Martina; Peroni, Lorenzo; Dallocchio, Alessandro
  In: Titolo volume non avvalorato
  XXXIX Convegno Nazionale AIAS (Maratea) 7-10 settembre 2010
  ISBN:9788860930743

• Measurement of thermal properties of a ceramic/metal joint by laser flash method
  Article
  

  Casalegno, Valentina; Vavassori, P.; Valle, M.; Ferraris, Monica; Salvo, Milena; Pintsuk, G.
  JOURNAL OF NUCLEAR MATERIALS
  Vol.407 pp.5 (pp.83-87) ISSN:0022-3115 DOI:10.1016/j.jnucmat.2010.09.032

• The way the mistery of the Mattei's case was solved
  Article
  

  Firrao, Donato; Ubertalli, Graziano; Matteis, Paolo; Pozzi, Chiara
  FRATTURA E INTEGRITÀ STRUTTURALE
  Vol.14 pp.12 (pp.81-92) ISSN:1971-8993 DOI:10.3221/IGF-ESIS.14.09

• Microwave activated combustion synthesis and compaction inseparate E and H fields: numerical simulation and experimentalresults
  Proceeding
  

  Rosa, R.; Veronesi, P.; Leonelli, C.; Bonamartini Corradi, A.; Ferraris, Monica; Casalegno, Valentina; Salvo, Milena; Han, Shaohua
  In: 12th International Ceramics Congress. Part B : Novel Routes for Ceramics Synthesis and Processing
  Trans Tech (SVIZZERA)
  CIMTEC 2010, 12th International Ceramics Congress and 5th Forum on New Materials (Montecatini Terme) June 6-11, 2010
  Vol.Advances in Science and Technology, 63 pp.6 (pp.197-202) ISBN:9783908158462 DOI:10.4028/www.scientific.net/AST.63.197

• Analisi del comportamento dinamico di supporti antishock per applicazioni navali
  Proceeding
  

  Peroni, Lorenzo; Avalle, Massimiliano
  In: Titolo volume non avvalorato
  AIAS Associazione Italiana per l'Analisi delle Sollecitazioni
  XXXIX Convegno Nazionale dell'Associazione Italiana per l’Analisi delle Sollecitazioni (AIAS) (Maratea) 7-10 settembre 2010
  pp.12 ISBN:9788860930743

• Approximation of the analytical models for the bonded single lap joint
  Proceeding
  

  Goglio, Luca; Rossetto, Massimo; Rezaei, Mohsen
  In: Titolo volume non avvalorato
  XXXIX Convegno nazionale AIAS (Maratea (I)) 7-10 settembre 2010
  pp.10 (pp.1312-1321) ISBN:9788860930743

• Was there a bomb on Mattei’s aircraft?
  Proceeding
  

  Firrao, Donato; Ubertalli, Graziano
  In: Supplemental proceedings
  The Minerals, Metals & Materials Society (TMS) (STATI UNITI D'AMERICA)
  TMS 2010 - 139th annual meeting & exibition (Seattle (USA)) 14/2/2010 - 18/2/2010
  Vol.3 pp.12 (pp.365-376) ISBN:9780873397537

• Antibacterial properties of silica coatings containing silver nanoclusters
  Proceeding
  

  Miola, Marta; Ferraris, Monica; Perero, Sergio; Ferraris, Sara; Verne', Enrica
  In: Congresso Nazionale di Bioingegneria 2010 Atti
  Patron (ITALIA)
  Secondo Congresso Nazionale di Bioingegneria - GNB 2010 (Torino) 8-10 luglio 2010
  pp.2 (pp.679-680) ISBN:9788855530828

• Fracture behavior in Cu46.5Zr46.5Al7 and Cu46.5Zr41.5Al7Y5 bulk metallic glasses.
  Article
  

  Matteis, Paolo; RUSSO SPENA, Pasquale; Pozzi, Chiara; Baser, T. A.; Baricco, M.; Battezzati, L.; Firrao, Donato; Castellero, A.
  METALLURGICAL AND MATERIALS TRANSACTIONS. A, PHYSICAL METALLURGY AND MATERIALS SCIENCE
  AMS International
  Vol.41 pp.8 (pp.1767-1774) ISSN:1073-5623 DOI:10.1007/s11661-010-0266-7

• Joining and Integration Issues of Ceramic Matrix Composites for Nuclear Applications
  Book chapter
  

  Ferraris, Monica; Salvo, Milena; Casalegno, Valentina; Rizzo, Stefano; Ventrella, Andrea
  Processing and Properties of Advanced Ceramics and Composites II: Ceramic Transactions
  WILEY (STATI UNITI D'AMERICA)
  Vol.220 pp.16 (pp.173-188) ISBN:9780470927151

• Experimental Evaluation of Glass-Ceramic Sealant in Planar SOFC Short Assemblies
  Proceeding
  

  Salvo, Milena; Smeacetto, Federico; Ajitdoss, LAKSHMI CHANDRU; Ferraris, Monica; Leone, Pierluigi; Santarelli, Massimo
  In: Proceedings of the 9th European Solid Oxide Fuel Cell Forum
  Paul Connor
  The 9th European Solid Oxide Fuel Cell Forum (Lucerne (CH)) 29 June – 2 July 2010
  pp.6 (pp.13-59-13-64)

• Yttria-stabilized zirconia thin film electrolyte produced by RF sputtering for solid oxide fuel cell applications
  Article
  

  Smeacetto, Federico; Salvo, Milena; Ajitdoss, LAKSHMI CHANDRU; Perero, Sergio; Moskalewicz, T.; Boldrini, S.; Doubova, L.; Ferraris, Monica
  MATERIALS LETTERS
  Vol.64 pp.4 (pp.2450-2453) ISSN:0167-577X DOI:10.1016/j.matlet.2010.08.016

• Precision of the one-dimensional solutions for bonded double lap joints
  Proceeding
  

  Goglio, Luca; Rossetto, Massimo
  In: Abstract book
  ACE-X 2010 (Paris (France)) 8-9 July, 2010
  pp.1 (pp.161-162)

• Measurement of longitudinal and transverse strain in an aluminium foam
  Proceeding
  

  Goglio, Luca; MANFREDINI VASSOLER, Jakson; Peroni, Marco
  In: Abstract book
  ACE-X 2010 (Paris (France)) 8-9 July, 2010
  pp.1

• Microwave-assisted combustion synthesis and compaction for high-temperature ceramics joining
  Proceeding
  

  Ferraris, Monica; Casalegno, Valentina; Salvo, Milena; S., Han; C., Leonelli; P., Veronesi
  In: poster at the 34th International Conference & Exposition on Advanced Ceramics & Composites (ICACC). January 24-29, 2010, Florida, USAAbstract ID #: 682861
  

• Joining of SiC and SiC/SiC for nuclear applications
  Proceeding
  

  Ferraris, Monica; Salvo, Milena; Casalegno, Valentina; Y., Katoh; T., Hinoki; S., Han
  In: oral presentation at the 34th International Conference & Exposition on Advanced Ceramics & Composites (ICACC). January 24-29, 2010, Florida, USA
  

• Shear strength tests of joined ceramics and C/C composites
  Proceeding
  

  Ferraris, Monica; Salvo, Milena; A., Ventrella
  In: 34th International Conference & Exposition on Advanced Ceramics & Composites (ICACC). January 24-29, 2010, Florida, USA
  

• Brazing of Mo to a CuZr alloy for the production of bimetallic raw materials for the CLIC accelerating structures
  Article
  

  Salvo, Milena; Casalegno, Valentina; Rizzo, Stefano; Ferraris, Monica; Izquierdo, G. A.; Heikkinen, S.; Sgobba, S.; Taborelli, M.
  JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
  Elsevier
  Vol.210 pp.8 (pp.791-798) ISSN:0924-0136 DOI:10.1016/j.jmatprotec.2010.01.010

• Chemical, mechanical and antibacterial properties of silver nanocluster - silica composite coatings obtained by sputtering
  Article
  

  Ferraris, Monica; Perero, Sergio; Miola, Marta; Ferraris, Sara; Gautier, G; Maina, G; Fucale, G.; Verne', Enrica
  ADVANCED ENGINEERING MATERIALS
  Vol.12 (7) pp.7 (pp.276-282) ISSN:1438-1656 DOI:10.1002/adem.200980076

• Comparison of shear strength tests on AV119 epoxy-joined ceramics
  Article
  

  Ventrella, Andrea; Salvo, Milena; Avalle, Massimiliano; Ferraris, Monica
  JOURNAL OF MATERIALS SCIENCE
  Vol.45 pp.5 (pp.4401-4405) ISSN:0022-2461 DOI:10.1007/s10853-010-4417-4

• On plastic notch effects in quenched and tempered steels
  Article
  

  RUSSO SPENA, Pasquale; Firrao, Donato; Matteis, Paolo
  THE JOURNAL OF MINERALS AND MATERIALS CHARACTERIZATION AND ENGINEERING
  Vol.9 pp.9 (pp.509-517) ISSN:1539-2511

• Microstructure and properties characterization of the double layered glass-ceramic coating onnear-α titanium alloy
  Article
  

  Moskalewicz, T; Smeacetto, Federico; Cempura, G.; Ajitdoss, LAKSHMI CHANDRU; Salvo, Milena; CZYRSKA FILEMONOWICZ, A.
  SURFACE & COATINGS TECHNOLOGY
  Vol.204 pp.8 (pp.3509-3516) ISSN:0257-8972 DOI:10.1016/j.surfcoat.2010.04.008

• Plastic localization phenomena in a Mn-alloyed austenitic steel
  Article
  

  Scavino, Giorgio; D'Aiuto, F.; Matteis, Paolo; RUSSO SPENA, Pasquale; Firrao, Donato
  METALLURGICAL AND MATERIALS TRANSACTIONS. A, PHYSICAL METALLURGY AND MATERIALS SCIENCE
  Vol.41 pp.9 (pp.1493-1501) ISSN:1073-5623 DOI:10.1007/s11661-010-0191-9

• A new glass to join foam glass components
  Article
  

  Ventrella, Andrea; Smeacetto, Federico; Salvo, Milena; Ferraris, Monica; Avalle, Massimiliano
  JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  Vol.19 pp.4 (pp.1244-1247) ISSN:1059-9495 DOI:10.1007/s11665-010-9623-3

• Silver nanocluster–silica composite coatings with antibacterial properties
  Article
  

  Ferraris, Monica; Perero, Sergio; Miola, Marta; Ferraris, Sara; Verne', Enrica; Morgiel, J.
  MATERIALS CHEMISTRY AND PHYSICS
  Vol.120 pp.4 (pp.123-126) ISSN:0254-0584 DOI:10.1016/j.matchemphys.2009.10.034

• Mechanical characterisation of particulate aluminium foams - strain-rate, density and matrix alloy vs. adhesive effects
  Article
  

  Lehmhus, Dirk; Baumeister, Joachim; Stutz, Lennart; Schneider, Eduard; Stöbener, Karsten; Avalle, Massimiliano; Peroni, Lorenzo; Peroni, Marco
  ADVANCED ENGINEERING MATERIALS
  Vol.12 pp.8 (pp.596-603) ISSN:1438-1656 DOI:10.1002/adem.200900315

• Comparison of shear strength tests on AV119 epoxy-joined carbon/carbon composites
  Article
  

  Ferraris, Monica; Ventrella, Andrea; Salvo, Milena; Avalle, Massimiliano; Pavia, Fabio; Martin, E.
  COMPOSITES. PART B, ENGINEERING
  Elsevier Ltd.
  Vol.41 pp.10 (pp.182-191) ISSN:1359-8368 DOI:10.1016/j.compositesb.2009.10.008

• Stress intensity factor in bonded joints: influence of the geometry
  Article
  

  Goglio, Luca; Rossetto, Massimo
  INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
  Vol.30 pp.9 (pp.313-321) ISSN:0143-7496 DOI:10.1016/j.ijadhadh.2009.12.008

• Fatigue crack growth in inhomogeneous steel components
  Article
  

  Firrao, Donato; Matteis, Paolo; RUSSO SPENA, Pasquale; Mortarino, GIOVANNI MARCO MARIA
  INTERNATIONAL JOURNAL OF FATIGUE
  Elsevier
  Vol.32 pp.6 (pp.864-869) ISSN:0142-1123 DOI:10.1016/j.ijfatigue.2009.10.004

• Joining of Advanced Ceramics, Glasses and Composites at Politecnico di Torino, Italy
  Book chapter
  

  Casalegno, Valentina; Chen, Qiuping; Chen, Qiuling; Salvo, Milena; Smeacetto, Federico; Ventrella, Andrea; Ferraris, Monica
  KEY ENGINEERING MATERIALS
  Key Engineering Materials
  Vol.434-435 pp.5 (pp.197-201) ISSN:1662-9795 DOI:10.4028/www.scientific.net/KEM.434-435.197

• Study of joining of carbon/carbon composites for ultra stable structures
  Article
  

  Salvo, Milena; Casalegno, Valentina; Vitupier, Yann; Cornillon, Laurence; Pambaguian, Laurent; Ferraris, Monica
  JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
  Elsevier
  Vol.30 pp.9 (pp.1751-1759) ISSN:0955-2219 DOI:10.1016/j.jeurceramsoc.2009.12.013

• New glass and glass-ceramic sealants for planar Solid Oxide Fuel Cells
  Article
  

  Smeacetto, Federico; Salvo, Milena; D'HERIN BYTNER, FREDERIC DANIEL; Leone, Pierluigi; Ferraris, Monica
  JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
  Vol.30 pp.8 (pp.933-940) ISSN:0955-2219 DOI:10.1016/j.jeurceramsoc.2009.09.033

• Bi-material joining for car body structures: experimental and numerical analysis
  Article
  

  Avalle, Massimiliano; Peroni, Lorenzo; Peroni, Marco; Scattina, Alessandro
  JOURNAL OF ADHESION
  Vol.86 pp.22 (pp.539-560) ISSN:0021-8464 DOI:10.1080/00218464.2010.484308

• Designing bonded joints by means of the jointcalc software
  Article
  

  Dragoni, E; Goglio, Luca; Kleiner, F.
  INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
  Vol.30 (pp.267-280) ISSN:0143-7496 DOI:10.1016/j.ijadhadh.2009.11.002

• Exact inference for the pth-quantile and the reliability of the two-parameter exponential distribution with singly type II censoring: a standard approach
  Article
  

  Paolino, Davide Salvatore
  COMMUNICATIONS IN STATISTICS. THEORY AND METHODS
  Taylor & Francis
  Vol.39 pp.12 (pp.2561-2572) ISSN:0361-0926 DOI:10.1080/03610920903068174

• Microstructure characterisation of erosion resistant coatings on carbon bonded carbon fibre composites
  Article
  

  Moskalewicz, T; Smeacetto, Federico; Salvo, Milena; Boccaccini, A. R.; CZYRSKA FILEMONOWICZ, A.
  JOURNAL OF MICROSCOPY
  Vol.237 pp.4 (pp.288-291) ISSN:0022-2720 DOI:10.1111/j.1365-2818.2009.03244.x

• Modelling of microwave assisted combustion synthesis applied to the joining of high temperature ceramics
  Proceeding
  

  Rosa, R.; Veronesi, P.; Leonelli, C.; Corradi, A. B.; Salvo, M.; Casalegno, V.; Shaohua, H.; Ferraris, M.
  Proceedings of the 12th International Conference on Microwave and High Frequency Heating, AMPERE
  Forschungszentrum Karlsruhe
  pp.4 (pp.352-355)

• Single and repeated impact on fiber composite laminates: damage index vs. residual flexural properties
  Proceeding
  

  Belingardi, Giovanni; Cavatorta, Maria Pia; Paolino, Davide Salvatore
  In: Titolo volume non avvalorato
  ICCM-17, 17th International Conference on Composite Materials (Edinburgh (UK)) 27-31 July, 2009
  pp.10

• Was there a bomb on Mattei’s aircraft?
  Proceeding
  

  Firrao, Donato; Ubertalli, Graziano
  In: Atti XX Convegno Nazionale IGF
  Gruppo Italiano Frattura (ITALIA)
  XX Convegno Nazionale IGF (Torino) 24-26 giugno 2009
  pp.13 (pp.18-30) ISBN:9788895940250

• Sugli effetti d'intaglio elasto-plastici in acciai temprati e rinvenuti: uno studio sperimentale del 1971 ri-esaminato con metodi numerici attuali
  Proceeding
  

  RUSSO SPENA, P.; Matteis, Paolo; Mortarino, GIOVANNI MARCO MARIA; Firrao, Donato
  In: Atti XX Convegno Nazionale IGF
  Gruppo Italiano Frattura (ITALIA)
  XX Convegno Nazionale IGF (Torino) 24-26/6/2009
  pp.6 (pp.259-264) ISBN:9788895940250

• Plastic localization phenomena in a Mn-alloyed austenitic steel
  Proceeding
  

  Scavino, Giorgio; D'Aiuto, F.; Matteis, Paolo; RUSSO SPENA, P.; Firrao, Donato
  In: EPD Congress 2009
  The Minerals, Metals & Materials Society (TMS) (STATI UNITI D'AMERICA)
  TMS 2009 Annual Meeting & Exhibition (San Francisco, CA, USA) 15/2/2009 - 19/2/2009
  pp.8 (pp.111-118) ISBN:9780873397445

• High heat flux testing of actively cooled tungsten and CFC mock-ups produced within the ExtreMat project
  Proceeding
  

  G., Pintsuk; Casalegno, Valentina; Ferraris, Monica; M., Grattarola; C., Gualco; K., Izdinsky; T., Koppitz; Salvo, Milena; F. SIMANCIK J., Linke
  In: 12th International Workshop on Plasma Facing Materials and Components for Fusion Applications (11-14 May 2009) poster P100
  

• Radiofrequency magnetron co-sputtering deposition of Nickel based nanocomposite formagnetic-optical SPR sensor
  Proceeding
  

  Chen, Qiuping; Perero, Sergio; Chen, Qiuling; Ferraris, Monica
  In: Proceedings of Magnet' 09 (Roma, Italy) 24 Oct
  Proceedings of Magnet' 09 (Roma, Italy) 24 Oct
  

• Joining of advanced ceramics, glasses and composites
  Proceeding
  

  Casalegno, Valentina; Chen, Qiuping; Chen, Qiuling; Salvo, Milena; Smeacetto, Federico; Ventrella, Andrea; Ferraris, Monica
  In: proceedings of The Sixth China International Conference on High-Performance CeramicsCICC-6
  proceedings of The Sixth China International Conference on High-Performance Ceramics (Harbin, China)
  

• Environment for engineering and entrepreneurship education
  Proceeding
  

  Gecevska, V; Lombardi, Franco; Trajkovic, V.
  In: Proceedings of the Business Development Conference 2009
  Business Development Conference (Zenica, Bosnia) 13-14 novembre 2009
  

• Web-lab e-platform for engineering and Business education
  Book chapter
  

  V., Gecevska; Lombardi, Franco
  INTELLIGENT PRODUCTION SYSTEMS - Way to Competitiveness and Innovative Engineering - Chapter 22
  (pp.247-256) ISBN:9789989270147

• Machining parameter optimization using ant colony system
  Book chapter
  

  F., Cus; Lombardi, Franco
  INTELLIGENT PRODUCTION SYSTEMS- Way to Competitiveness and Innovative Engineering
  Faculty of Mechanical Engineering, University of Maribor (SLOVENIA)
  pp.5 (pp.221-225) ISBN:9789989270147

• Operational safety assessment of 1940s cast steel pulleys
  Proceeding
  

  Firrao, Donato; Matteis, Paolo; RUSSO SPENA, Pasquale
  In: Materials Science & Technology 2009 Conference and Exhibition
  The Printing House (STATI UNITI D'AMERICA)
  Materials Science & Technology 2009 Conference and Exhibition (MS&T'09) (Pittsburgh) 25/10/2009 - 29/10/2009
  pp.9 (pp.541-549)

• Fatigue crack growth in inhomogeneous steel components
  Other
  

  Firrao, D.; Matteis, Paolo; RUSSO SPENA, Pasquale; Mortarino, GIOVANNI MARCO MARIA
  

• Planar SOFC stack development and operation
  Proceeding
  

  Leone, Pierluigi; Lanzini, Andrea; ORTIGOZA VILLALBA, GUSTAVO ADOLFO; Santarelli, Massimo; CALI' QUAGLIA, Michele; Smeacetto, Federico; Salvo, Milena; Ferraris, Monica
  In: Proceedings of EFC2009
  Third European Fuel Cell Technology & Applications Conference - Piero (Rome, Italy) December 15-18, 2009
  pp.2

• One-step brazing process for CFC monoblock joints and mechanical testing
  Article
  

  Casalegno, Valentina; Salvo, Milena; Murdaca, Stefano; Ferraris, Monica
  JOURNAL OF NUCLEAR MATERIALS
  Vol.393 (2) pp.6 (pp.300-305) ISSN:0022-3115 DOI:10.1016/j.jnucmat.2009.06.015

• Caratterizzazione in campo dinamico di un composito rame-allumina: identificazione di modelli termo-meccanici
  Proceeding
  

  Peroni, Marco; Peroni, Lorenzo; Dallocchio, Alessandro
  In: PROCEEDINGS CONVEGNO AIAS
  XXXVIII CONVEGNO AIAS (TORINO) 9-11 SETTEMBRE 2009
  pp.10

• Joining and Integration Issues of Ceramic Matrix Composites for Nuclear Applications
  Proceeding
  

  Ferraris, Monica; Salvo, M.; Casalegno, Valentina; Rizzo, S.; Ventrella, A.
  In: The American Ceramic Society's Ceramic Transactions proceedings ISSN 1042-1122
  MS&T'09
  

• Rare earth doped tellurite fibres, nanocluster doped silica thin films, and direct bonding for photonics
  Other
  

  Milanese, Daniel; Ferraris, Monica; Chen, Qiuling; Lousteau, Joris; Perero, Sergio; Chen, Qiuping; Gebavi, Hrvoje; R., Perumal
  

• Antibacterial properties of sputtered silver nanocluster silica composite coating
  Proceeding
  

  Ferraris, Monica; Perero, Sergio; Miola, Marta; Ferraris, Sara; Verne', Enrica
  In: Digest of the European Congress and Exhibition on Advanced Materials and Processes (Euromat) 2009
  European Congress and Exhibition on Advanced Materials and Processes (Euromat) 2009 (Glasgow, UK) 7-10/09/2009
  

• Comparison of shear strength tests on epoxy -joined ceramic components (and CMCs )
  Proceeding
  

  Ferraris, Monica; Salvo, M.; Ventrella, A.; Avalle, Massimiliano; Martin, E.
  In: proceedings of 3rd International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2009, Rome - Italy, 22-23 June, 2009
  International Conference on Advanced Computational Engineering and Experimenting
  

• Brazing of Mo to a CuZr alloy for the production of bimetallic raw materials for the CLIC accelerating structures
  Proceeding
  

  Salvo, M.; Casalegno, Valentina; Rizzo, S.; Ferraris, Monica; ARNAU IZQUIERDO, G.; Heikkinen, S.; Sgobba, S.; Taborelli, M.
  In: XIX Congresso AIV , Senigallia,Italy, Maggio 2009
  

• Bi-material joining for car body structures: experimental and numerical analysis
  Proceeding
  

  Peroni, Marco; Peroni, L; Avalle, Massimiliano; Scattina, Alessandro
  In: PROCEEDING ACE-X 2009
  III CONVEGNO ACE-X (ROMA) 22-23 GIUGNO 2009
  

• Considerazioni sullo stato di tensione singolare nelle giunzioni adesive
  Proceeding
  

  Goglio, Luca; Rossetto, Massimo
  In: Atti del XXXVIII Convegno Nazionale AIAS
  Convegno Nazionale AIAS (Torino) 9-11 settembre 2009
  (pp.173-174)

• Cedimento statico e sotto impatto di un nodo strutturale incollato
  Proceeding
  

  Goglio, Luca; Peroni, Marco
  In: Titolo volume non avvalorato
  Atti del XXXVIII Convegno Nazionale AIAS (Torino) 9-11 settembre 2009
  (pp.235-236)

• Caratterizzazione sperimentale di schiume ibride
  Proceeding
  

  Peroni, Lorenzo; Avalle, Massimiliano; Peroni, Marco; Lehmhus, D.; Weise, J.
  In: Atti del XXXVIII Convegno Nazionale dell'Associazione Italiana per l'Analisi delle Sollecitazioni
  Geda Srl (ITALIA)
  XXXVIII Convegno Nazionale AIAS (Torino) 9-11 settembre 2009
  pp.10

• Advanced experimental investigation and numerical simulation of polycarbonate behaviour at different strain-rate and temperature
  Proceeding
  

  Peroni, Marco; Peroni, Lorenzo; Avalle, Massimiliano
  In: Proceedings of the 9th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
  EDP Sciences (FRANCIA)
  DYMAT 2009 (Brussels (Belgium)) 7-11 settembre 2009
  (pp.1383-1389) ISBN:9782759804726 DOI:10.1051/dymat/2009195

• Fatigue and fracture toughness properties of large-bloom mixed-microstructure heat-treated steels
  Proceeding
  

  Firrao, Donato; Matteis, Paolo; RUSSO SPENA, Pasquale; Mortarino, GIOVANNI MARCO MARIA; Silva, G.; Rivolta, B.; Gerosa, R.; Pinasco, M. R.; Ienco, M. G.; Fabbreschi, M.
  In: 12th International Conference on Fracture
  12th International Conference on Fracture (Ottawa (Canada)) 12/7/2009 - 17/7/2009
  

• Single and repeated impact tests on fiber composite laminates: damage index vs. residual flexural properties
  Proceeding
  

  Belingardi, Giovanni; Cavatorta, Maria Pia; Paolino, Davide Salvatore
  In: ICCM17 - XVII Int. Conf. Composite Materials
  IOM Communications
  ICCM17 - XVII Int. Conf. Composite Materials (EDINBURGH) 27-31 July 2009
  (pp.1-10)

• The mechanical behaviour of polyurethane foam: multiaxial and dynamic behaviour
  Article
  

  Peroni, Lorenzo; Avalle, Massimiliano; Peroni, Marco
  INTERNATIONAL JOURNAL OF MATERIALS ENGINEERING INNOVATION
  Vol.1 pp.21 (pp.154-174) ISSN:1757-2754

• Stress intensity factor in bonded joints: influence of the geometry
  Proceeding
  

  Goglio, Luca; Rossetto, Massimo
  In: Titolo volume non avvalorato
  Advanced Computational Engineering and Experimenting, ACE-X 2009 (Roma (I)) 22-23 June
  

• On the rate of growth and extent of the steady damage accumulation phase in repeated impact tests
  Article
  

  Belingardi, Giovanni; Cavatorta, Maria Pia; Paolino, Davide Salvatore
  COMPOSITES SCIENCE AND TECHNOLOGY
  Elsevier
  Vol.69 pp.6 (pp.1693-1698) ISSN:0266-3538 DOI:10.1016/j.compscitech.2008.10.023

• JOINING OF CERAMIC MATRIX COMPOSITES AND ADVANCED CERAMICS
  Proceeding
  

  Ferraris, Monica; Salvo, Milena; F., Smeacetto; Casalegno, Valentina; A., Ventrella
  In: Proceedings of INSTM 09
  Proceedings of INSTM 09 (Tirrenia) June 2009
  

• Room temperature plastic flow localization in a Mn-alloyed austenitic steel
  Proceeding
  

  Firrao, Donato; Matteis, Paolo; Mortarino, GIOVANNI MARCO MARIA; RUSSO SPENA, Pasquale; Scavino, Giorgio; D'Aiuto, Fabio
  MATERIALS SCIENCE FORUM
  In: Recent Developments in the Processing and Applications of Structural Metals and Alloys
  Trans Tech Publications
  International conference on Recent Developments in the processing and applications of structural metals and alloys (COMO (Italy)) 2008, 22-25 June
  Vol.604-605 pp.8 (pp.139-146) ISSN:0255-5476 DOI:10.4028/www.scientific.net/MSF.604-605.139

• Design, Characterization and Performance of Glass Ceramic Sealants for Planar SOFCs
  Proceeding
  

  Salvo, Milena; Smeacetto, Federico; Ferraris, Monica; Ajitdoss, LAKSHMI CHANDRU; Chrysanthou, A.
  In: SOFC: Cells and Components
  SOFC: Cells and Components (Lucerna, CH) July 1, 2009
  pp.7 (pp.1-7)

• Fracture of (Cu50Zr50)100-x-zAlxYz Bulk Metallic Glasses.
  Other
  

  Matteis, Paolo; RUSSO SPENA, P.; Pozzi, Chiara; Firrao, D.; Baser, T. A.; Baricco, M.; Eckert, J.; Battezzati, L.; Das, J.
  

• Evaluation of the singular stresses in adhesive joints
  Article
  

  Goglio, Luca; Rossetto, Massimo
  JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
  Vol.23 (pp.1441-1457) ISSN:0169-4243 DOI:10.1163/156856109X433018

• MODELING OF MICROWAVE ASSISTED COMBUSTION SYNTHESIS APPLIED TO THE JOININGOF HIGH TEMPERATURE CERAMICS
  Proceeding
  

  R., Rosa; P., Veronesi; C. LEONELLI AND A. B., Corradi; Salvo, Milena; Casalegno, Valentina; Ferraris, Monica; H., Han
  In: AMPERE 2009
  AMPERE 2009 (Germany)
  

• One-step brazing process and mechanical tests for CFC monoblock joints
  Proceeding
  

  Casalegno, Valentina; Salvo, M; Murdaca, S; Ferraris, Monica
  In: 12th International Workshop on Plasma-Facing Materials and Componentsfor Fusion Applications Jülich Germany
  www.fz-juelich.de/pfmc-12E-mail: pfmc-12@fz-juelic (GERMANIA)
  12th International Workshop on Plasma-Facing Materials and Componentsfor Fusion Applications (Jülich , Germany) 11-14 May 2009
  

• AlSi7 metallic foams – aspects of material modelling for crash analysis
  Article
  

  Avalle, Massimiliano; Lehmhus, D; Peroni, Lorenzo; Pleteit, H; Schmiechen, P; Belingardi, Giovanni; Busse, M.
  INTERNATIONAL JOURNAL OF CRASHWORTHINESS
  Vol.14 (pp.269-285) ISSN:1358-8265 DOI:10.1080/13588260802445836

• Effect of the heat treatment on the mechanical properties of a precipitation hardening steel for large plastic molds
  Article
  

  Firrao, Donato; Matteis, Paolo; Mortarino, GIOVANNI MARCO MARIA; RUSSO SPENA, Pasquale; Ienco, M. G.; Pellati, G.; Pinasco, M. R.; Gerosa, R.; Silva, G.; Rivolta, B.; Tata, E.; Montanari, R.
  LA METALLURGIA ITALIANA
  pp.10 (pp.33-42) ISSN:0026-0843

• Erosion protective coatings for low density, highly porous carbon/carbon composites
  Article
  

  Smeacetto, Federico; Salvo, Milena; Ferraris, Monica; Casalegno, Valentina; Canavese, Giancarlo; Moskalewicz, T; Ellacott, S; Rawlings, R. D.; Boccaccini, A. R.
  CARBON
  Vol.47 pp.9 (pp.1511-1519) ISSN:0008-6223 DOI:10.1016/J.CARBON.2009.01.045

• Thermo-mechanical model identification of a strengthened copper with an inverse method
  Proceeding
  

  Peroni, M.; Peroni, Lorenzo; A., Dallocchio
  In: Proceedings Dymat 2009
  EDP SCIENCES
  Dymat 2009 (Brussel) 7-11 September 2009
  pp.7 (pp.1367-1373) ISBN:9782759804733 DOI:10.1051/dymat/2009193

• Use of vitrified bottom ashes of municipal solid waste incinerators in bituminous mixtures in substitution of natural sands
  Article
  

  Bassani, Marco; Santagata, Ezio; Baglieri, Orazio; Ferraris, Monica; Salvo, Milena; Ventrella, Andrea
  ADVANCES IN APPLIED CERAMICS
  Maney Publishing
  Vol.108 pp.11 (pp.33-43) ISSN:1743-6753 DOI:10.1179/174367608X364285

• Performance and testing of glass-ceramic sealant used to join anode-supported-electrolyte to Crofer22APU in planar solid oxide fuel cells
  Article
  

  Smeacetto, Federico; Chrysanthou, A; Salvo, Milena; Zhang, Z; Ferraris, Monica
  JOURNAL OF POWER SOURCES
  ELSEVIER SCIE
  Vol.190 pp.6 (pp.402-407) ISSN:0378-7753 DOI:10.1016/j.jpowsour.2009.01.042

• Analysis of the inelastic behavior of foams with numerical models obtained from X-ray tomography
  Proceeding
  

  Peroni, Lorenzo; Avalle, Massimiliano; Peroni, Marco
  In: Proceedings Plasticity 2009
  NEAT PRESS (STATI UNITI D'AMERICA)
  Plasticity 2009 (St. Thomas, US Virgin Islands, US) 3-8 gennaio 2009
  (pp.52-54) ISBN:9780965946391

• Comparison of the energy absorption capability of crash boxes assembled by spot-weld and continuous joining techniques
  Article
  

  Peroni, Lorenzo; Avalle, Massimiliano; Belingardi, Giovanni
  INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
  Elsevier
  Vol.36 pp.14 (pp.498-511) ISSN:0734-743X DOI:10.1016/j.ijimpeng.2008.06.004

• Use of vitrified MSWI bottom ashes for concrete production
  Article
  

  Ferraris, Monica; Salvo, Milena; Ventrella, Andrea; Buzzi, L.; Veglia, M.
  WASTE MANAGEMENT
  Vol.29 pp.7 (pp.1041-1047) ISSN:0956-053X DOI:10.1016/j.wasman.2008.07.014

• Use of vitrified bottom ashes in concrete
  Article
  

  Ferraris, Monica; Salvo, Milena; Ventrella, Andrea; Buzzi, L.
  WASTE MANAGEMENT
  Vol.29 (pp.1041-1047) ISSN:0956-053X

• Electrochemical preparation and characterization of Ni/SiCcompositionally graded multilayered coatings
  Article
  

  GARCIA LECINA, E.; GARCIA URRUTIA, I.; Diez, J. A.; Salvo, Milena; Smeacetto, Federico; Gautier, G.; Seddon, R.; Martin, R.
  ELECTROCHIMICA ACTA
  Vol.54 pp.7 (pp.2556-2562) ISSN:0013-4686 DOI:10.1016/j.electacta.2008.04.064

• Superficial hardening of austenitic stainless steels using TiN plasma vapor deposition (PVD), Kolsterization', and their characterizations
  Article
  

  Ubertalli, G.; Mortarino, G. M. M.; Rosalbino, F.; Firrao, D.
  LA METALLURGIA ITALIANA
  AIM
  Vol.100 pp.6 (pp.15-20) ISSN:0026-0843

• Experimental evaluation of pulse electric current effect on residual stresses in composite-to-copper joints
  Article
  

  Stepanov, G. V.; Babutskii, A. I.; Mameev, I. A.; Ferraris, M.; Casalegno, V.; Salvo, M.
  STRENGTH OF MATERIALS
  Springer
  Vol.40 pp.6 (pp.452-457) ISSN:0039-2316 DOI:10.1007/s11223-008-9055-6

• Stacking sequence effect on low velocity impact response of glass/epoxy laminates
  Proceeding
  

  Belingardi, Giovanni; Cavatorta, Maria Pia; Paolino, Davide Salvatore
  In: Impact Loading of Lightweight Structures
  ILLS 2008 (Trondheim (Norway)) 17-19 June, 2008
  ISBN:9788274820975

• Web Based Environment in Engineering and Entrepreneurship Education
  Proceeding
  

  V., Gecevska; Lombardi, Franco; F., Cus; M., Gusev
  In: Proc. International Conference for Entrepreneurship, Innovation and Regional Development
  International Conference for Entrepreneurship, Innovation and Regional Development (Ohrid) 2008
  (pp.81-90)

• Evaluation of the singular stresses in adhesive joints
  Proceeding
  

  Goglio, Luca; Rossetto, Massimo
  In: Titolo volume non avvalorato
  ACE-X2008 (Barcellona (E)) 14-15 July, 2008
  pp.1

• Use of vitrified bottom ashes of municipal solid waste incinerators for concrete and bituminous mixtures production
  Other
  

  Ferraris, Monica; Salvo, Milena; Andrea, Ventrella; Chen, Qiuping
  

• Glass-Ceramic Seal to Join Crofer 22 APUAlloy to Anode-Supported Electrolyte in Planar SOFCs
  Proceeding
  

  Salvo, Milena; F., Smeacetto; Ferraris, Monica; Casalegno, Valentina; P., Asinari
  In: Titolo volume non avvalorato
  American Ceramic Society (STATI UNITI D'AMERICA)
  32ND INTERNATIONAL CONFERENCE & EXPOSITION ON ADVANCED CERAMICS & COMPOSITES. Daytona Beach, FL, USA (Daytona Beach, FL) JANUARY 27–FEBRUARY 1.
  

• Comparison of Different Shear TestConfigurations on Joined Advanced Ceramics and CMCs
  Proceeding
  

  Ferraris, Monica; A., Ventrella; Salvo, Milena; Avalle, Massimiliano
  In: Titolo volume non avvalorato
  American Ceramic Society
  32ND INTERNATIONAL CONFERENCE & EXPOSITION ON ADVANCED CERAMICS & COMPOSITES (Daytona Beach, FL, USA) JANUARY 27–FEBRUARY 1
  

• Caratterizzazione di strati superficiali induriti ottenuti su acciai inossidabili austenitici mediante PVD e Kolsterizzazione
  Article
  

  Ubertalli, Graziano; Mortarino, GIOVANNI MARCO MARIA; Rosalbino, Francesco; Firrao, Donato
  LA METALLURGIA ITALIANA
  Vol.100 pp.6 (pp.25-30) ISSN:0026-0843

• Simulazioni sperimentali delle trasformazioni di fase dell’austenite al raffreddamento in acciai per stampi per materie plastiche
  Proceeding
  

  Firrao, Donato; Matteis, Paolo; RUSSO SPENA, Pasquale; M. R., Pinasco; G., Pellati; B., Rivolta; R., Gerosa; A., Silvestri; E., Tata; R., Montanari; A., Ghidini
  In: Titolo volume non avvalorato
  Associazione Italiana di Metallurgia (AIM) (ITALIA)
  32° Convegno Nazionale AIM (Ferrara) 24-26/09/2008
  ISBN:9788885298675

• Effects of microalloying on an innovative quenched and tempered plastic mold steel
  Other
  

  Firrao, Donato; Matteis, Paolo; RUSSO SPENA, Pasquale; Mortarino, GIOVANNI MARCO MARIA; Chiarbonello, Maurizio; Pinasco, M. R.; Ienco, M. G.; Fabbreschi, M.; Silva, G.; Rivolta, B.; Gerosa, R.; Tata, M.; Missori, S.; Montanari, R.; Ghidini, A.
  

• Characterization and performance of glass-ceramic sealant to join metallic interconnects to YSZ and anode-supported-electrolyte in planar SOFCs
  Article
  

  Smeacetto, Federico; Salvo, Milena; Ferraris, Monica; Casalegno, Valentina; Asinari, Pietro; Chrysanthou, A.
  JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
  Vol.28 pp.7 (pp.2521-2527) ISSN:0955-2219 DOI:10.1016/j.jeurceramsoc.2008.03.035

• Boron nitride/titanium nitride laminar lubricating coating deposited by pulsed laser ablation on polymer surface
  Article
  

  Kosydar, R; Bonarski, J. T.; Kot, M; Zimowski, S; Ferraris, Monica; Salvo, Milena; Major, B.
  BULLETIN OF THE POLISH ACADEMY OF SCIENCES. TECHNICAL SCIENCES
  Vol.56 (3) (pp.217-221) ISSN:0239-7528

• Portevin - Le Chatelier effect in a Mn-alloyed thermomechanically processed austenitic steel
  Proceeding
  

  F., Daiuto; Scavino, Giorgio; Matteis, Paolo; Mortarino, GIOVANNI MARCO MARIA; RUSSO SPENA, Pasquale; Firrao, Donato
  In: Titolo volume non avvalorato
  Associazione Italiana di Metallurgia (ITALIA)
  3rd International Conference on ThermoMechanical Processing of steels (Padova) 10-12/09/2008
  ISBN:9788885298668

• Microstructural characterisation of SiC and TiC coatings on CBCF
  Proceeding
  

  T, Moskalewicz; Smeacetto, Federico; Salvo, Milena; A. R., Boccaccini
  In: Titolo volume non avvalorato
  International Conference on Electron Microscopy EM'2008 (Zakopane) 8–11 June 2008
  ISBN:9788360958155

• Modellazione numerica di strutture soggette ad esplosioni
  Proceeding
  

  Belingardi, Giovanni; Peroni, Lorenzo; Rapelli, G.
  In: Titolo volume non avvalorato
  CLUA edizioni (ITALIA)
  XXXVII Conv. Naz. AIAS (ROMA) 10-13 settembre 2008
  (pp.1-10) ISBN:9788887965513

• Modellazione numerica di materiali cellulari con ausilio di tomografie computerizzate
  Proceeding
  

  Avalle, Massimiliano; Peroni, Lorenzo; Peroni, Marco
  In: AIAS 2008 - Atti del XXXVII Convegno Nazionale
  clua Edizioni Ancona (ITALIA)
  XXXVII Convegno Nazionale dell'Associazione Italiana per l'Analisi delle Sollecitazioni (AIAS) (Roma) 10-13 settembre 2008
  ISBN:9788887965513

• Static and impact behaviour of an adhesively bonded assembly
  Proceeding
  

  Goglio, Luca; Peroni, M.
  In: Titolo volume non avvalorato
  Advanced Computation in Engineering and eXperimenting (ACE-X) 2008 (Barcelona (E)) 14-15 July, 2008
  

• Jointcalc - An analytical tool to estimate the strength of adhesively bonded joints
  Proceeding
  

  Dragoni, E; Gambaro, C; Goglio, Luca; Kleiner, F.
  In: Titolo volume non avvalorato
  Euradh 2008 - Adhesion '08 (Oxford (UK)) 3-5 September 2008
  

• A new damage index to monitor the range of the penetration process in thick laminates
  Article
  

  Belingardi, Giovanni; Cavatorta, Maria Pia; Paolino, Davide Salvatore
  COMPOSITES SCIENCE AND TECHNOLOGY
  Vol.68 pp.7 (pp.2646-2652) ISSN:0266-3538 DOI:10.1016/j.compscitech.2008.04.029

• Fatigue behavior of homogeneuous-microstructure and mixed-microstructure steels
  Other
  

  D., Firrao; Matteis, Paolo; G. M. M., Mortarino; RUSSO SPENA, Pasquale; G., Silva; B., Rivolta; R., Gerosa; A., Ghidini
  Vol.cd-rom

• Acciaio Innovativo per stampi per materie plastiche: caratterizzazione microstrutturale
  Proceeding
  

  M., Fabbreschi; M. G., Ienco; G., Pellati; Scavino, Giorgio; Ubertalli, Graziano; R., Gerosa; B., Rivolta; A., Ghidini
  In: Titolo volume non avvalorato
  AIM (ITALIA)
  32° Conv. Naz. AIM (Ferrara) 24-26 settembre 2008
  

• Room temperature plastic flow localization in a Mn-alloyed austenitic steel
  Other
  

  D., Firrao; Matteis, Paolo; Mortarino, GIOVANNI MARCO MARIA; RUSSO SPENA, Pasquale; Scavino, Giorgio; F., D'Aiuto
  

• Fracture of Cu46.5Zr46.5Al7 and Cu46.5Zr41.5Al7Y5 bulk metallic glasses
  Proceeding
  

  Matteis, Paolo; RUSSO SPENA, Pasquale; C., Pozzi; Firrao, Donato; T. A., Baser; M., Baricco; J., Eckert; Battezzati, Livio
  In: Multilevel Approach to Fracture of Materials, Components and Structures
  VUTIUM (REPUBBLICA CECA)
  17th European Conference on Fracture (Brno, Rep. Ceca) 2-5/9/2008
  pp.8 (pp.1717-1724) ISBN:9788021436923

• Fatigue behavior of homogeneous-microstructure and mixed-microstructure steels
  Proceeding
  

  Firrao, Donato; Matteis, Paolo; Mortarino, GIOVANNI MARCO MARIA; RUSSO SPENA, Pasquale; G., Silva; B., Rivolta; R., Gerosa; A., Ghidini
  In: Multilevel Approach to Fracture of Materials, Components and Structures
  VUTIUM (REPUBBLICA CECA)
  17th European Conference on Fracture (Brno (CZE)) Sep. 2-5, 2008
  pp.7 (pp.2357-2363) ISBN:9788021436923

• Microstructure, mechanical properties and oxidation behavior of the TiAl(Si,Ag) coating on near-α titanium alloy
  Article
  

  Moskalewicz, T; Wendler, B; Smeacetto, Federico; Salvo, Milena; Manescu, A; CZYRSKA FILEMONOWICZ, A.
  SURFACE & COATINGS TECHNOLOGY
  Vol.202 (pp.5876-5881) ISSN:0257-8972 DOI:10.1016/j.surfcoat.2008.06.111

• Aluminum foam–polymer hybrid structures (APM aluminum foam) in compression testing
  Article
  

  Karsten, Stöbener; Dirk, Lehmhus; Avalle, Massimiliano; Peroni, Lorenzo; Matthias, Busse
  INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
  Elsevier Ltd.
  Vol.45 pp.15 (pp.5627-5641) ISSN:0020-7683 DOI:10.1016/j.ijsolstr.2008.06.007

• Effect of the heat treatment on the mechanical properties of a precipitation hardening steel for large plastic molds.
  Proceeding
  

  Firrao, Donato; Matteis, Paolo; Mortarino, GIOVANNI MARCO MARIA; RUSSO SPENA, Pasquale; M. G., Ienco; G., Pellati; M. R., Pinasco; R., Gerosa; G., Silva; E., Tata; R., Montanari
  In: Titolo volume non avvalorato
  Associazione Italiana di Metallurgia (AIM) (ITALIA)
  Innovation in heat treatment for industrial competitiveness - European Conference on Heat Treatment (ECHT) 2008 (Verona) 7- 9/5/2008
  pp.11 ISBN:9788885298644

• Experimental evaluation of the torsional behaviour of thin walled beams: elastic and buckling situations
  Proceeding
  

  Belingardi, Giovanni; Peroni, Lorenzo; Scattina, Alessandro
  In: High Performance Structures and Materials IV
  WIT Press (REGNO UNITO DI GRAN BRETAGNA)
  HPSM 4 - High Performance Structures and Materials (Algarve - Portugal) maggio 2008
  (pp.253-262) ISBN:9781845641061 DOI:10.2495/HPSM080271

• Identification of the strain rate parameters for structural adhesives
  Article
  

  Fancello, Ea; Goglio, Luca; MANFREDINI VASSOLER, Jakson; Stainier, L.
  JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
  Vol.22 (pp.1523-1540) ISSN:0169-4243 DOI:10.1163/156856108X309495

• Non- destructive characterization of carbon fiber composite/Cu joints for nuclear fusion applications
  Article
  

  Casalegno, Valentina; Salvo, Milena; Ferraris, Monica; Smeacetto, Federico; Merola, M; Bettuzzi, M.
  FUSION ENGINEERING AND DESIGN
  Elsevier
  Vol.83 pp.11 (pp.702-712) ISSN:0920-3796 DOI:10.1016/j.fusengdes.2008.04.005

• Repeated impact response of hand lay-up and vacuum infusion thick glass reinforced laminates
  Article
  

  Belingardi, Giovanni; Cavatorta, Maria Pia; Paolino, Davide Salvatore
  INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
  Vol.35 pp.11 (pp.609-619) ISSN:0734-743X DOI:10.1016/j.ijimpeng.2007.02.005

• Joining of machined SiC/SiC composites for thermonuclear fusion reactors
  Article
  

  Ferraris, Monica; Salvo, Milena; Casalegno, Valentina; Ciampichetti, Andrea; Smeacetto, Federico; Zucchetti, Massimo
  JOURNAL OF NUCLEAR MATERIALS
  Elsevier BV:PO Box 211, 1000 AE Amsterdam Netherlands:011 31 20 4853757, 011 31 20 4853642, 011 31 20 4853641, EMAIL: nlinfo-f@elsevier.nl, INTERNET: http://www.elsevier.nl, Fax: 011 31 20 4853598
  Vol.375 pp.6 (pp.410-415) ISSN:0022-3115 DOI:10.1016/j.jnucmat.2008.02.020

• Experimental evaluation of pulse electric current effect on residual stresses in composite-to-copper joint
  Article
  

  Stepanov, G.; Babutsky, A.; Mameev, I.; Ferraris, Monica; Casalegno, Valentina; Salvo, Milena
  STRENGTH OF MATERIALS
  Springer
  Vol.40 (3) pp.6 (pp.452-457) ISSN:0039-2316

• Microstructural Modifications after Small Charge Explosions in Aluminum and Copper Targets
  Proceeding
  

  Firrao, Donato; Matteis, Paolo; Pozzi, Chiara; Scavino, Giorgio; Ubertalli, Graziano; M. G., Ienco; G., Pellati; P., Piccardo; M. R., Pinasco; G., Costanza; R., Montanari; M. E., Tata; G., Brandimarte; S., Petralia
  In: Supplemental Proceedings
  The Minerals, Metals & Materials Society (TMS) (STATI UNITI D'AMERICA)
  2008 TMS Annual Meeting & Exhibition (New Orleans, LA, USA) 9/3/2008 - 13/3/2008
  Vol.1 (pp.327-332) ISBN:9780873397162

• Design of adhesive joints based on peak elastic stresses
  Article
  

  Goglio, Luca; Rossetto, Massimo; Dragoni, E.
  INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
  Vol.28 pp.9 (pp.427-435) ISSN:0143-7496 DOI:10.1016/j.ijadhadh.2008.04.001

• DEVELOPMENT OF TESTING SYSTEMS FOR DYNAMIC ASSESMENT OF SHEET METAL SPECIMENS
  Article
  

  Peroni, Marco; Peroni, Lorenzo
  MECCANICA
  Vol.43 (pp.225-236) ISSN:0025-6455

• Neutron diffraction measurement of residual stresses in CFC/Cu/CuCrZr joints for nuclearfusion technology
  Article
  

  Fiori, F; Calbucci, V; Casalegno, Valentina; Ferraris, Monica; Salvo, Milena; Giuliani, A; Manescu, A; Rustichelli, F.
  JOURNAL OF PHYSICS. CONDENSED MATTER
  Institute Of Physics
  Vol.20 pp.6 ISSN:0953-8984 DOI:10.1088/0953-8984/20/10/104260

• Glass and composite seals for the joining of YSZ to metallic interconnect in solid oxide fuel cells
  Article
  

  Smeacetto, Federico; Salvo, Milena; Ferraris, Monica; Casalegno, Valentina; Asinari, Pietro
  JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
  Vol.28 pp.6 (pp.611-616) ISSN:0955-2219 DOI:10.1016/j.jeurceramsoc.2007.07.008

• Glass–ceramic seal to join Crofer 22 APU alloy to YSZ ceramic in planar SOFCs
  Article
  

  Smeacetto, Federico; Salvo, Milena; Ferraris, Monica; Cho, J; Boccaccini, A. R.
  JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
  Vol.28 (1) pp.8 (pp.61-68) ISSN:0955-2219 DOI:10.1016/j.jeurceramsoc.2007.05.006

• One-step brazing process to join CFC composites to copper and copper alloy
  Article
  

  Salvo, Milena; Casalegno, Valentina; Rizzo, Stefano; Smeacetto, Federico; Ferraris, Monica; Merola, M.
  JOURNAL OF NUCLEAR MATERIALS
  Vol.374 pp.6 (pp.69-74) ISSN:0022-3115 DOI:10.1016/j.jnucmat.2007.07.010

• High strain-rate compression and tension behaviour of an epoxy bi-component adhesive
  Article
  

  Goglio, Luca; Peroni, Lorenzo; Peroni, Marco; Rossetto, Massimo
  INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
  Vol.28 pp.11 (pp.329-339) ISSN:0143-7496 DOI:10.1016/j.ijadhadh.2007.08.004

• The mechanical behaviour of aluminium foam structures in different loading conditions
  Article
  

  Peroni, Lorenzo; Avalle, Massimiliano; Peroni, Marco
  INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
  Vol.35 pp.15 (pp.644-658) ISSN:0734-743X DOI:10.1016/j.ijimpeng.2007.02.007

• Protective Coatings For Carbon Bonded CarbonFibre Composites
  Article
  

  Smeacetto, Federico; Ferraris, Monica; Salvo, Milena; Ellacott, S. D.; Ahmed, A; Rawlings, R. D.; Boccaccini, A. R.
  CERAMICS INTERNATIONAL
  Vol.34 (pp.1297-1301) ISSN:0272-8842 DOI:10.1016/j.ceramint.2007.03.012

• Impact rupture of structural adhesive joints under different stress combinations
  Article
  

  Goglio, Luca; Rossetto, Massimo
  INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
  Vol.7 pp.9 (pp.635-643) ISSN:0734-743X DOI:10.1016/j.ijimpeng.2007.02.006

• Dynamic effects on mechanical characteristics of composite plates submitted to impact tests
  Proceeding
  

  Belingardi, Giovanni; Cavatorta, Maria Pia; Paolino, Davide Salvatore
  In: Experimental Analysis of Nano and Engineering Materials and Structures
  Springer
  Proceedings of the 13th International Conference on Experimental Mechanics (Alexandroupolis (Greece)) July 1–6, 2007
  pp.2 (pp.685-686) ISBN:9781402062384 DOI:10.1007/978-1-4020-6239-1_340

• Size effect on repeated impact response of glass/epoxy laminates
  Proceeding
  

  Belingardi, Giovanni; Cavatorta, Maria Pia; Paolino, Davide Salvatore
  In: Titolo volume non avvalorato
  ETDCM 8; 8th Seminar on Experimental Techniques and Design in Composite Materials (Cagliari (Italy)) 3-6 October, 2007
  

• Evidences of explosive events from microstructural changes in metal objects.
  Proceeding
  

  Firrao, Donato; Matteis, Paolo; Pozzi, Chiara; G., Scavino; Ubertalli, Graziano; M. G., Ienco; P., Piccardo; M. R., Pinasco; R., Montanari; G., Costanza; M. E., Tata; G., Brandimarte; S., Petralia
  In: Titolo volume non avvalorato
  Interpol (FRANCIA)
  15th Int. Forensic Science Symposium
  

• Microstructure and Properties of Warm Forged Microalloyed Medium Carbon Steels
  Other
  

  D., Firrao; RUSSO SPENA, Pasquale; R., Valentini
  

• Strengthening Mechanisms in a Novel Precipitation Hardening Steel for Plastic Molds
  Other
  

  D., Firrao; M., Chiarbonello; Matteis, Paolo; G. M. M., Mortarino; RUSSO SPENA, Pasquale; G., Scavino; Ubertalli, Graziano; M. G., Ienco; A., Parodi; G., Pellati; M. R., Pinasco; R., Gerosa; B., Rivolta; A., Silvestri; G., Silva; A., Tavasci; E., Tata; S., Missori; R., Montanari; A., Ghidini
  

• Applications of Innovative Trip and Twip Steels to Automotive Body Structures
  Other
  

  G., Scavino; C., Federici; S., Maggi; J., Lamontanara; F., D'Aiuto; Matteis, Paolo; M., Chiarbonello; G. M. M., Mortarino; RUSSO SPENA, Pasquale; D., Firrao
  

• Ferromagnetic Resonance and Microwave Behavior of ASn-substituted (A= Ni-Co-Zn) BaM-hexaferrites
  Article
  

  Pasquale, M; Perero, Sergio; Lisjak, D.
  IEEE TRANSACTIONS ON MAGNETICS
  Vol.43 (pp.2636-2638) ISSN:0018-9464

• Microwave measurement uncertainty due to applied magnetic field
  Article
  

  Perero, Sergio; Pasquale, M.
  PHYSICA STATUS SOLIDI. A, APPLICATIONS AND MATERIALS SCIENCE
  Vol.204 (pp.4062-4066) ISSN:1862-6300

• Design of adhesive joints based on peak elastic stresses,
  Proceeding
  

  Goglio, Luca; Rossetto, Massimo; Dragoni, E.
  In: Titolo volume non avvalorato
  Advanced Computational Engineering and Experimenting ACE-X 2007 (ALGARVE (P)) 12-13 July
  

• Identification of the strain rate parameters for structural adhesives
  Proceeding
  

  Fancello, E. A.; Goglio, Luca; MANFREDINI VASSOLER, Jakson
  In: Titolo volume non avvalorato
  Advanced Computational Engineering and Experimenting ACE-X 2007 (ALGARVE) 12-13 July 2007
  

• Microstructural effects in face-centered-cubic alloys after small charge explosions
  Article
  

  Firrao, Donato; Matteis, Paolo; Scavino, Giorgio; Ubertalli, Graziano; Pozzi, Chiara; Ienco, M. G.; Piccardo, P.; Pinasco, M. R.; Costanza, G.; Montanari, R.; Tata, M. E.; Brandimarte, G.; Petralia, S.
  METALLURGICAL AND MATERIALS TRANSACTIONS. A, PHYSICAL METALLURGY AND MATERIALS SCIENCE
  SPRINGER
  Vol.38A pp.16 (pp.2869-2884) ISSN:1073-5623 DOI:10.1007/S11661-007-9318-Z

• Design and performance of glass-ceramic sealants for planar SOFCs
  Proceeding
  

  Smeacetto, Federico; Salvo, Milena; Asinari, Pietro; Ferraris, Monica
  In: Proceedings of the 2nd european fuel cell technology and applications conference
  ASME (STATI UNITI D'AMERICA)
  EFC2007 (Rome) 11-14 dicembre
  (pp.303-304) ISBN:9780791848012

• Analysis of Kinematic Methods For Invariants Based Classification in the ISO/TC213 Framework
  Proceeding
  

  Chiabert, Paolo; Lombardi, Franco; Vaccarino, Francesco
  In: Proceedings of the 10th CIRP Seminar on CAT
  Shaker-Verlag (GERMANIA)
  10th CIRP Seminar on CAT (Erlangen) March 2007
  pp.8 (pp.1-8) ISBN:9783832260361

• Meccanismi di rafforzamento per precipitazione in un acciaio innovativo per stampi per materie plastiche.
  Proceeding
  

  Firrao, Donato; M., Chiarbonello; Matteis, Paolo; Mortarino, GIOVANNI MARCO MARIA; RUSSO SPENA, Pasquale; G., Scavino; Ubertalli, Graziano; M. G., Ienco; A., Parodi; G., Pellati; M. R., Pinasco; R., Gerosa; B., Rivolta; A., Silvestri; G., Silva; A., Tavasci; E., Tata; S., Missori; R., Montanari; A., Ghidini
  In: Titolo volume non avvalorato
  AIM (ITALIA)
  21° Convegno Nazionale Trattamenti Termici (Salsomaggiiore (PR)) 8-9-10 maggio 2007
  ISBN:9788885298743

• Comparison between Traditional and Innovative Steels for Large Plastic Moulds.
  Book chapter
  

  Firrao, Donato; M., Chiarbonello; Matteis, Paolo; Mortarino, GIOVANNI MARCO MARIA; RUSSO SPENA, Pasquale; G., Scavino; Ubertalli, Graziano; M. G., Ienco; G., Pellati; M. R., Pinasco; E., Stagno; R., Gerosa; B., Rivolta; A., Tavasci; E., Tata; R., Montanari; A., Silvestri; G., Silva; S., Missori; A., Ghidini
  EPD Congress 2007
  TMS (STATI UNITI D'AMERICA)
  pp.10 (pp.69-78) ISBN:9780873396783

• Caratterizzazione microstrutturale ed a fatica di acciai FeP05 e trip con e senza saldatura.
  Proceeding
  

  Scavino, Giorgio; D'Aiuto, Fabio; Ubertalli, Graziano; Maggi, S.
  In: Titolo volume non avvalorato
  AIM (ITALIA)
  21° Convegno Nazionale Trattamenti Termici (Salsomaggiiore) 8-9-10 maggio 2007
  Vol.1 (pp.1-12) ISBN:9788885298743

• Valutazione dell'austenite residua in campioni cementati con metodi diffrattometrici ed ottimizzazione del coefficiente R.
  Proceeding
  

  D'Aiuto, Fabio; Ubertalli, Graziano; Scavino, Giorgio
  In: Trattamenti Termici -
  AIM (ITALIA)
  21° Convegno Nazionale Trattamenti Termici (Salsomaggiiore) 8-9-10 maggio 2007
  Vol.1 (pp.1-8) ISBN:9788885298743

• Relationships between tensile and fracture mechanics properties and fatigue properties of large plastic mould steel blocks.
  Article
  

  Firrao, Donato; Matteis, Paolo; Scavino, Giorgio; Ubertalli, Graziano; Ienco, M. G.; Pinasco, M. R.; Stagno, E.; Gerosa, R.; Rivolta, B.; Silvestri, A.; Silva, G.; Ghidini, A.
  MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
  Vol.468-470 pp.8 (pp.193-200) ISSN:0921-5093 DOI:10.1016/j.msea.2006.07.166

• Microstructure and properties of the protective Ti-Al-Si-Ag coating on Timetal 834
  Article
  

  Moskalewicz, T; Rutkowski, B; Wendler, D; Smeacetto, Federico; Salvo, Milena; Penkalla, H. J.; CZYRSKA FILEMONOWICZ, A.
  IM INżYNIERIA MATERIAłOWA
  Vol.3-4 (pp.698-701) ISSN:0208-6247

• Microstructural changes due to small charge explosions in FCC metals
  Proceeding
  

  Firrao, D.; Matteis, Paolo; Scavino, Giorgio; Ubertalli, Graziano; Pozzi, Chiara; Ienco, M. G.; Piccardo, P.; Pinasco, M. R.; Montanari, R.; Tata, M. E.; Costanza, G.; Brandimarte, G.; Petralia, S.
  In: Titolo volume non avvalorato
  VI Convegno Nazionale sulla Scienza e Tecnologia dei Materiali (Perugia) 12/6/2007 - 15/6/2007
  

• Shape partitioning based on symmetries detection
  Proceeding
  

  Chiabert, Paolo; DE MADDIS, Manuela; Lombardi, Franco; Orlando, Maurizio; Ruffa, Suela; Vaccarino, Francesco; Levi, Raffaello
  In: Proc. Israel – Italy Bi-National Conference on “Shape Modeling and Reasoning for Industrial and Biomedical Applications”
  Technion (ISRAELE)
  Israel – Italy Bi-National Conference on “Shape Modeling and Reasoning for Industrial and Biomedical (Haifa) 6-8/5/2007
  Vol.1 pp.6 (pp.80-85)

• Damage variables in impact testing of composite laminates
  Book chapter
  

  Cavatorta, Maria Pia; Paolino, Davide Salvatore
  COMPOSITE MATERIALS RESEARCH PROGRESS
  Nova Science Publisher
  (pp.241-260) ISBN:9781600219948

• The mechanical behaviour of polyurethane foam in multiaxial loading conditions
  Proceeding
  

  Peroni, Lorenzo; Avalle, Massimiliano
  In: IMPLAST 2007
  The University Press Bochum (GERMANIA)
  IMPLAST 2007 (Bochum) 21-24 agosto 2007
  (pp.103-110) ISBN:9783899662665

• Identification of strain-rate sensitivity parameters of steels with an inverse method
  Proceeding
  

  Peroni, Lorenzo; Peroni, Marco; Belingardi, Giovanni
  In: Experimental Analysis of Nano and Engineering Materials and Structures - Experimental Analysis of Nano and Engineering Materials and Structures Proceedings of the 13th International Conference on Experimental Mechanics
  ICEM13 (Int. Conf. on Experimental Mechanics) (Adrianopolis (Greece)) July 2007
  pp.10 ISBN:9781402062384

• Caratterizzazione di materiali cellulari ad elevate velocità di deformazione con un sistema di prova SHPB multi-impulso
  Proceeding
  

  Peroni, Marco; Avalle, Massimiliano; Peroni, Lorenzo
  In: AIAS 2007 - Atti del XXXVI Convegno Nazionale
  Cuzzolin Editore (ITALIA)
  XXXVI Convegno Nazionale dell'Associazione Italiana per l'Analisi delle Sollecitazioni (Ischia) 4-8 settembre 2007
  ISBN:9788887998757

• Caratterizzazione dell’influenza della velocità di deformazione sul comportamento meccanico di materiali polimerici
  Proceeding
  

  Peroni, Marco; Avalle, Massimiliano; Peroni, Lorenzo
  In: AIAS 2007 - Atti del XXXVI Convegno Nazionale
  Cuzzolin Editore (ITALIA)
  XXXVI Convegno Nazionale dell'Associazione Italiana per l'Analisi delle Sollecitazioni (Ischia) 4-8 settembre 2007
  ISBN:9788887998757

• Experimental Investigation of the Energy Absorption Capability of Continuous Joined Crash Boxes
  Proceeding
  

  Peroni, Lorenzo; Avalle, Massimiliano; Belingardi, Giovanni
  In: Proceedings of the 20th International Technical Conference on the Enhanced Safety of Vehicles
  20th ESV (Lyon, France) 18-21 giugno 2007
  pp.13

• AN INVERSE METHOD FOR IDENTIFICATION OF STRAIN-RATE SENSITIVITY PARAMETERS OF METALS
  Proceeding
  

  Peroni, Marco; Belingardi, Giovanni; Peroni, Lorenzo
  In: Plasticity of Conventional and Emerging Materials: Theory & Applications
  NEAT PRESS (STATI UNITI D'AMERICA)
  Proceedings of PLASTICITY ’07 (Girwood, ALASKA) 2 - 6 JUNE 2007
  (pp.67-69) ISBN:9780965946377

• Caratterizzazione microstrutturale e a fatica di campioni di acciaio 19MnCr5 sottoposti a cementazione e carbonitrurazione
  Proceeding
  

  Ubertalli, Graziano; D'Aiuto, Fabio; Scavino, Giorgio; E., Morgano
  In: raccolta su cd rom
  Associazione italiana metallurgia (ITALIA)
  21° Convegno nazionale trattamenti termici (Salsomaggiore terme) 8/10 maggio 2007
  ISBN:9788885298743

• Effect of the Strain Rate on the Mechanical Behaviour of Epoxy Adhesives
  Article
  

  Goglio, Luca; Peroni, Marco; Rossetto, Massimo
  KEY ENGINEERING MATERIALS
  Vol.347 (pp.671-676) ISSN:1662-9795

• Protectivecoatings for induction casting of titanium
  Article
  

  Smeacetto, Federico; Salvo, Milena; Ferraris, Monica
  SURFACE & COATINGS TECHNOLOGY
  Vol.201 (24) (pp.9541-9548) ISSN:0257-8972 DOI:10.1016/j.surfcoat.2007.04.027

• Conservative likelihood inference for type I censored samples from the log-location-scale distributions
  Article
  

  Paolino, Davide Salvatore
  COMMUNICATIONS IN STATISTICS. SIMULATION AND COMPUTATION
  Taylor & Francis
  Vol.36 pp.15 (pp.519-533) ISSN:0361-0918 DOI:10.1080/03610910701212876

• Joining of ceramics to metals. New concepts in joining
  Other
  

  Casalegno, Valentina; Ferraris, Monica; Salvo, Milena; Smeacetto, F.
  

• JOINING OF CROFER22 TO ANODE-SUPPORTED-ELECTROLYTE BY GLASS-CERAMIC SEALANT
  Other
  

  Smeacetto, Federico; Salvo, Milena; Ferraris, Monica; Boccaccini, A. R.; Jimnez, C.
  

• Method to produce coating and joining for foam glass samples
  Other
  

  Ferraris, Monica; Smeacetto, Federico; Ventrella, A; Salvo, Milena; Saponaro, C.
  

• CFC/Cu joints for ITER Divertor: non-destructive characterization
  Other
  

  Casalegno, Valentina; Salvo, Milena; Ferraris, Monica; Vesprini, R; Merola, M.
  

• SHEAR STRENGTH TESTS OF JOINED ADVANCED CERAMICS AND C/C COMPOSITES
  Other
  

  Ferraris, Monica; Ventrella, A; Salvo, Milena; Avalle, Massimiliano
  

• Characterising the sintering behaviour of pulverised fuel ash using heating stage microscopy
  Article
  

  Adell, V; Cheeseman, C. R.; Ferraris, Monica; Salvo, Milena; Smeacetto, Federico; Boccaccini, A. R.
  MATERIALS CHARACTERIZATION
  Vol.58 (pp.980-988) ISSN:1044-5803 DOI:10.1016/J.MATCHAR.2006.10.004

• A finite element simulation and experimental validation of a composite bolted joint loaded in bending and torsion
  Article
  

  Cavatorta, Maria Pia; Paolino, Davide Salvatore; Peroni, Lorenzo; M., Rodino
  COMPOSITES. PART A: APPLIED SCIENCE AND MANUFACTURING
  Elsevier
  Vol.38 pp.11 (pp.1251-1261) ISSN:1359-835X DOI:10.1016/j.compositesa.2006.06.010

• Fatigue analysis of honeycomb-composite sandwich beams
  Article
  

  Belingardi, Giovanni; P., Martella; Peroni, Lorenzo
  COMPOSITES. PART A: APPLIED SCIENCE AND MANUFACTURING
  Elsevier
  Vol.38 pp.9 (pp.1183-1191) ISSN:1359-835X DOI:10.1016/j.compositesa.2006.06.007

• Experimental investigation of plastic collapse of aluminium extrusions in biaxial bending
  Article
  

  Belingardi, Giovanni; Peroni, Lorenzo
  INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
  Vol.49 (pp.554-566) ISSN:0020-7403 DOI:10.1016/j.ijmecsci.2006.09.025

• Agencies for Perception in Environmental Monitoring
  Article
  

  Amigoni, F.; Brandolini, A.; Caglioti, V.; Dilecce, V.; Guerriero, A.; Lazzaroni, M.; Lombardi, Franco; Ottoboni, R.; Pasero, Eros Gian Alessandro; Piuri, V.; Scotti, O.; Somenzi, D.
  IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT
  Piscataway, N.J. : IEEE
  Vol.55 pp.13 (pp.1038-1050) ISSN:0018-9456 DOI:10.1109/TIM.2006.877747

• 18th International Conference on Surface Modification Technologies; Dijon; 15 November 2004 through 17 November 2004; Code 67119 - Microprobe characterization of nitrocarburized surface layers.
  Proceeding
  

  Scavino, Giorgio; Ubertalli, Graziano
  In: Proceedings of the 18th International Conference on Surface Modification Technologies
  18th International Conference on Surface Modification Technologies (Dijon (F)) 15 - 17 November 2004
  Vol.2006 pp.5 (pp.321-325)

• Microwave resonance in nanogranular (Fe0.7Co0.3)71B22Ni7 films
  Article
  

  Pasquale, M; Perero, Sergio; Bertotti, G; Kabos, P; Lim, S. H.
  IEEE TRANSACTIONS ON MAGNETICS
  Vol.42 ISSN:0018-9464

• Nanostructure and Ferromagnetic Resonance of Fe-Co Based Thin films
  Other
  

  Perero, Sergio; Sasso, C. P.; Magni, A; Coisson, M; Celegato, F; Pasquale, M; Lim, S. H.
  

• Structure, ferromagnetic resonance, and permeability of nanogranular Fe-Co-B-Ni films
  Article
  

  Pasquale, M; Celegato, F; Coisson, M; Magni, A; Perero, Sergio; Kabos, P; Teppati, Valeria; Han, S. H.; Kim, J; Lim, S. H.
  JOURNAL OF APPLIED PHYSICS
  AIP
  Vol.99 pp.3 ISSN:0021-8979 DOI:10.1063/1.2165926

• Relationships between tensile and fracture mechanics properties and fatigue properties of large plastic mold steel
  Other
  

  Firrao, D.; Matteis, Paolo; Scavino, Giorgio; Ubertalli, Graziano; Ienco, M. G.; Pinasco, M. R.; Stagno, E.; Gerosa, R.; Rivolta, B.; Silvestri, A.; Silva, G.; Ghidini, A.
  TMS 2006 Annual Meeting (TMS2006) (San Antonio, Texas, USA) 12/3/2006 - 16/3/2006
  

• Resistenza dei materiali e dei collegamenti
  Book
  

  Goglio, Luca
  Levrotto & Bella (ITALIA)
  ISBN:9788882181239

• Analysis of the coach rollover scenario
  Article
  

  Belingardi, Giovanni; Martella, P; Peroni, Lorenzo
  VEHICLE SYSTEM DYNAMICS
  Taylor & Francis
  Vol.44 pp.13 (pp.455-467) ISSN:0042-3114 DOI:10.1080/00423110600874420

• Comparative Response in Repeated Impact Tests of Hand Lay-up and Vacuum Infusion Glass Reinforced Composites
  Proceeding
  

  Belingardi, Giovanni; Cavatorta, Maria Pia; Paolino, Davide Salvatore
  In: Titolo volume non avvalorato
  ASME (STATI UNITI D'AMERICA)
  8th Biennial ASME Conference on Engineering Systems Design and Analysis (Torino (Italy)) July 4-7 2006.
  Vol.3 pp.8 (pp.675-682) ISBN:9780791842508

• Vacuum infusion of a composite E-glass vinylester laminate for nautical application: experimental response to repeated impacts.
  Proceeding
  

  Belingardi, Giovanni; Cavatorta, Maria Pia; Paolino, Davide Salvatore
  WIT TRANSACTIONS ON THE BUILT ENVIRONMENT
  In: Titolo volume non avvalorato
  WIT PRESS (REGNO UNITO DI GRAN BRETAGNA)
  9th International Conference of Structures under shock and impact (SUSI) (New Forest (UK)) July 2-5, 2006
  Vol.87 pp.10 (pp.345-354) ISSN:1746-4498 ISBN:9781845641757 DOI:10.2495/SU060341

• Study of the sintering mechanism of pulverised fuel ash using heating stage microscopy
  Other
  

  Adell, V; Cheeseman, C. R.; Boccaccini, A. R.; Ferraris, Monica; Salvo, Milena; Smeacetto, Federico
  

• Sintering anisotropy and shape distortion during viscous flow sintering: the case of glass matrix composites and glass-ceramics
  Other
  

  Boccaccini, A. R.; Adell, V; Cheeseman, C. R.; Ferraris, Monica; Salvo, Milena; Smeacetto, Federico
  

• Non-Destructive Testing of CFC/Cu Joints
  Other
  

  Casalegno, Valentina; Ferraris, Monica; Salvo, Milena; Merola, M; Vesprini, R.
  

• Metal-Ceramic Joint Planar SOFC
  Other
  

  Smeacetto, Federico; Ferraris, Monica; Salvo, Milena
  

• SHEAR TESTS FOR W/CU/CUCRZR AND CFC/CU/CUCRZR JOINTS
  Other
  

  Ferraris, Monica; Casalegno, Valentina; Salvo, Milena; Merola, M.
  

• JOINING OF CERAMICS AND COMPOSITES TO METALS FOR ENERGY PRODUCTION: FUSION ENERGY, SOFC
  Other
  

  Ferraris, Monica; Salvo, Milena; Smeacetto, Federico; Casalegno, Valentina; Ventrella, A.
  

• COMPARISON OF DIFFERENT SHEAR TEST CONFIGURATIONS FOR JOINED CERAMICS AND CMCS
  Other
  

  Ferraris, Monica; Avalle, Massimiliano; Ventrella, A; Salvo, Milena; Casalegno, Valentina; Smeacetto, Federico
  

• Proposal for a new technique to join CFC composites to copper
  Article
  

  Appendino, Pietro; Ferraris, Monica; Casalegno, Valentina; Salvo, Milena; Merola, M; Grattarola, M.
  JOURNAL OF NUCLEAR MATERIALS
  Vol.348 pp.6 (pp.102-107) ISSN:0022-3115 DOI:10.1016/J.JNUCMAT.2005.09.007

• Fracture mechanics of large plastic moulds and property assessment of 1.2738 (P20 modified) plastic mould steel.
  Proceeding
  

  Firrao, Donato; Matteis, Paolo; Mortarino, GIOVANNI MARCO MARIA; Scavino, Giorgio; Ubertalli, Graziano; Chiarbonello, Maurizio; M. G., Ienco; A., Parodi; M. R., Pinasco; E., Stagno; R., Gerosa; B., Rivolta; G., Silva; A., Ghidini
  In: Tooling materials and their applications from research to market.
  Ancora (ITALIA)
  TOOL06 - 7th international tooling conference (Torino) 02/05/2006 - 05/05/2006
  Vol.1 pp.10 (pp.715-724) ISBN:9788882020187

• Sviluppo di sistemi di prova per la caratterizzazione a trazione di lamiere ad elevata velocità di deformazione
  Proceeding
  

  Peroni, Lorenzo; Peroni, Marco
  In: Atti del XXXV Convegno Nazionale Associazione Italiana per l’Analisi delle Sollecitazioni
  AIAS2006 (Ancona) 13-16 Settembre
  pp.10 ISBN:9788887288773

• Friction and wear behaviour of sintered steels submitted to sliding and abrasion tests
  Article
  

  L., Ceschini; G., Palombarini; G., Sambogna; Firrao, Donato; Scavino, Giorgio; Ubertalli, Graziano
  TRIBOLOGY INTERNATIONAL
  Vol.39 pp.8 (pp.748-755) ISSN:0301-679X DOI:10.1016/j.triboint.2005.07.003

• Caratterizzazione statica e dinamica di punti di saldatura in condizioni di sollecitazione multiassiale
  Proceeding
  

  Peroni, Lorenzo; Belingardi, Giovanni; Avalle, Massimiliano
  In: Atti del XXXV Convegno Nazionale dell'Associazione Italiana per l'Analisi delle Sollecitazioni
  Edizioni Nuova Prohmos (ITALIA)
  XXXV Convegno Nazionale dell'Associazione Italiana per l'Analisi delle Sollecitazioni (Ancona) 13-16 settembre 2006
  ISBN:9788887288773

• High strain-rate compression test on metallic foam using a multiple pulse SHPB apparatus
  Article
  

  Peroni, Marco; Peroni, Lorenzo; Avalle, Massimiliano
  JOURNAL DE PHYSIQUE IV
  Vol.134 (pp.609-616) ISSN:1155-4339 DOI:10.1051/jp4:2006134094

• Intelligent approach for optimal modeling of manufacturing systems
  Article
  

  Gecevska, V; Cus, F; Lombardi, Franco; Dukovski, V; Kuzinovski, M.
  JOURNAL OF ACHIVEMENTS IN MATERIALS AND MANUFACTURING ENGINEERING
  OCSCO World Press
  Vol.14 pp.7 (pp.97-103) ISSN:1734-8412

• Heat treatment and failure risk of large automotive plastic molds: a fracture mechanics approach and property assessment
  Article
  

  Firrao, Donato; Matteis, Paolo; Scavino, Giorgio; Ubertalli, Graziano; M. G., Ienco; A., Parodi; M. R., Pinasco; E., Stagno; R., Gerosa; B., Rivolta; G., Silva; A., Ghidini
  LA METALLURGIA ITALIANA
  Vol.98(11-12) (pp.43-51) ISSN:0026-0843

• Shear strength tests of joined advanced ceramics
  Proceeding
  

  Avalle, Massimiliano; Ventrella, Andrea; Ferraris, Monica; Salvo, Milena
  In: 2006 Proceedings of the 8th Biennial ASME Conference on Engineering Systems Design and Analysis: CD-ROM
  8th Biennial ASME Conference on Engineering Systems Design and Analysis (Torino, Italy) 4-7 luglio 2006
  ISBN:9780791837795

• The mechanical behaviour of aluminium foam structures in different loading conditions
  Proceeding
  

  Peroni, Lorenzo; Avalle, Massimiliano; Peroni, Marco
  In: 2006 Proceedings of the 8th Biennial ASME Conference on Engineering Systems Design and Analysis: CD-ROM
  8th Biennial ASME Conference on Engineering Systems Design and Analysis (Torino, Italy) 4-7 luglio 2006
  ISBN:9780791837795

• Experimental investigation of the energy absorption capability of bonded crash boxes
  Proceeding
  

  Peroni, Lorenzo; Avalle, Massimiliano
  In: Structures Under Shock and Impact IX
  WIT Press (REGNO UNITO DI GRAN BRETAGNA)
  Ninth International Conference on Structures Under Shock and Impact (New Forest) 3-5 luglio 2006
  (pp.445-454) ISBN:9781845641757

• Multiaxial characterization of the mechanical behaviour of an aluminium foam
  Proceeding
  

  Peroni, Lorenzo; Avalle, Massimiliano; Martella, P.
  In: High Performance Structures and Materials III
  WIT Press (REGNO UNITO DI GRAN BRETAGNA)
  Third International Conference on High Performance Structures and Materials (Ostend, Belgium) 3-5 maggio 2006
  (pp.249-258) ISBN:9781845641627

• Strength of adhesive joints under impact stress conditions
  Proceeding
  

  Goglio, Luca; Rossetto, Massimo
  In: Titolo volume non avvalorato
  8th Biennial Conference on Engineering Systems Design and Analysis (ESDA 2006) (Torino (Italy)) July 4-7
  (pp.95306-1-95306-7)

• Impact rupture of structural adhesive joints under different stress combinations
  Proceeding
  

  Goglio, Luca; Rossetto, Massimo
  In: Titolo volume non avvalorato
  20 International Symposium Swiss Bonding 06 (Rapperswil am Zuerichsee (CH)) 16-18 maggio 2006
  (pp.275-283)

• Mechanical properties of large plastic-mold steel blooms
  Proceeding
  

  Chiarbonello, Maurizio; Firrao, Donato; R., Gerosa; A., Ghidini; M. G., Ienco; Matteis, Paolo; Mortarino, GIOVANNI MARCO MARIA; A., Parodi; M. R., Pinasco; B., Rivolta; Scavino, Giorgio; Silva, Gustavo; E., Stagno; Ubertalli, Graziano
  In: Fracture of nano and engineering materials and structures
  Springer (PAESI BASSI)
  16th European Conference of Fracture (ECF16) (Alexandroupolis, Greece) July 3-7, 2006
  (pp.433-434) ISBN:9781014020499

• Relazione tra proprietà tensili, Tenacità a frattura e proprietà a fatica di grandi blocchi di acciai per stampi per materie plastiche
  Proceeding
  

  Firrao, Donato; Matteis, Paolo; Scavino, Giorgio; Ubertalli, Graziano; M. G., Ienco; M. R., Pinasco; E., Stagno; R., Gerosa; B., Rivolta; A., Silvestri; G., Silva; A., Ghidini
  In: Atti del XVIII Convegno Nazionale del Gruppo Italiano Frattura
  Luigi Pellegrini Editore (ITALIA)
  XVIII Convegno Nazionale del Gruppo Italiano Frattura (Cetraro (CS)) 31 Maggio - 1 Giugno 2006
  (pp.173-180)

• Repeated impact behaviour and damage progression of glass reinforced plastics
  Proceeding
  

  Belingardi, Giovanni; Cavatorta, Maria Pia; Paolino, DAVIDE SALVATORE
  In: Fracture of Nano and Engineering Materials and Structures
  Springer (PAESI BASSI)
  16th ECF - European Conference on Fracture (Alexandroupolis (Greece)) 3-7 July 2006
  ISBN:9781402049712

• Innovative procedure for the analysis of reliability data from time censored samples
  Proceeding
  

  Belingardi, Giovanni; Paolino, Davide Salvatore
  In: Titolo volume non avvalorato
  ICAD 2006 - 4th International Conference on Axiomatic Design (Firenze (I)) 13 - 16 June 2006
  (pp.1-6)

• Metal objects mapping after small charge explosions. A study on AISI 304Cu steel with two different grain sizes.
  Article
  

  Firrao, Donato; Matteis, Paolo; Scavino, Giorgio; Ubertalli, Graziano; Ienco, M. G.; Pellati, G.; Piccardo, P.; Pinasco, M. R.; Stagno, E.; Costanza, G.; Montanari, R.; Tata, M. E.; Brandimarte, G.; Petralia, S.
  JOURNAL OF FORENSIC SCIENCES
  Vol.51 pp.12 (pp.520-531) ISSN:0022-1198 DOI:10.1111/J.1556-4029.2006.00111.X

• Mechanical twins in 304 stainless steel after small charge explosions
  Article
  

  Firrao, Donato; Matteis, Paolo; Scavino, Giorgio; Ubertalli, Graziano; Ienco, M. G.; Pellati, G.; Piccardo, P.; Pinasco, M. R.; Stagno, E.; Montanari, R.; Tata, M. E.; Brandimarte, G.; Petralia, S.
  MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
  Elsevier
  Vol.424 pp.10 (pp.23-32) ISSN:0921-5093 DOI:10.1016/j.msea.2006.02.036

• A method of preparing coated foam glass articles and articles thereby obtained
  Patent
  

  Ferraris, Monica; Salvo, Milena; Smeacetto, Federico; Ventrella, Andrea; Saponaro, C.
  N.WO2006/059306 A1

• E-learning Environment Implemented in Manufacturing Engineering Courses
  Proceeding
  

  V., Gecevska; F., Cus; Lombardi, Franco; P., Cosic
  In: Proceedings of E-Learn World Conference on E-learing in Corporate, Government, Healthcare and Higher Education
  E-Learn World Conference on E-learing in Corporate, Government, Healthcare and Higher Education (Canada) 2005
  

• Microprobe characterisation of nitrocarburized surface layers
  Proceeding
  

  Scavino, Giorgio; Ubertalli, Graziano
  In: Surface Modification Technologies XVIII
  ASM Int., Materials Park (STATI UNITI D'AMERICA)
  Surface Modification Technologies XVIII (Digione Francia) 15 - 17 nonembre 2004
  (pp.1-5)

• Microwave properties and anisotropy field distribution in nanogranular Fe-Co-Al-O Film
  Article
  

  Pasquale, M; Co, ; Sson, M; Perero, Sergio; Lim, S. H.
  IEEE TRANSACTIONS ON MAGNETICS
  Vol.41 ISSN:0018-9464

• Nanostructure and Microwave properties of CoFeAlO film
  Proceeding
  

  Pasquale, M; Sasso, C. P.; Magni, A; Perero, Sergio; Celegato, F; Teppati, Valeria; Sohn, J. C.; Lim, S. H.
  In: Titolo volume non avvalorato
  3° International Workshop on High frequency Micromagnetic Devices and Materials (Sendai, Miyagi, Japan) April 11th-12th, 2005
  pp.2 (pp.13-14)

• Microwave properties and anisotropy field distribution in nanogranular Fe-Co-Al-O Film
  Proceeding
  

  Pasquale, M; Coisson, M; Perero, Sergio; Lim, S. H.
  In: Digests of the IEEE International
  Magnetics Conference, 2005. INTERMAG (Asia) 4-8 April 2005
  (pp.1925-1926)

• CFC/Cu Joints for ITER Divertor: New Developments
  Other
  

  Ferraris, Monica; Salvo, Milena; Casalegno, Valentina; Merola, M.
  

• Design and realisation of coating for SiC/SiC
  Other
  

  Ferraris, Monica; Salvo, Milena; Casalegno, Valentina; Smeacetto, F.
  

• Comparison of different shear test configurations for joined ceramics and CMCs
  Other
  

  Avalle, Massimiliano; Ventrella, A; Ferraris, Monica; Salvo, Milena
  

• Composite seal for joining YSZ to metallic interconnect in solid oxide fuel cells
  Other
  

  Ferraris, Monica; Smeacetto, Federico; Salvo, Milena; Casalegno, Valentina
  

• Innovative technique for joining carbon-carbon composites to copper
  Other
  

  Ferraris, Monica; Salvo, Milena; Casalegno, Valentina; Merola, M.
  

• Joining between CFC composites and copper
  Other
  

  Casalegno, Valentina; Ferraris, Monica; Salvo, Milena; Merola, M.
  

• JOINING OF DIFFERENT MATERIALS FOR ENERGY PRODUCTION: FUSION ENERGY, SOFC.
  Other
  

  Ferraris, Monica; Appendino, Pietro; Casalegno, Valentina; Milanese, Daniel; Salvo, Milena; Smeacetto, Federico; Ventrella, A.
  

• JOINING OF C/C COMPOSITES TO COPPER FOR THERMONUCLEAR FUSION APPLICATION
  Other
  

  Casalegno, Valentina; Ferraris, Monica; Salvo, Milena; Merola, M.
  

• Composite Seal for SOFC
  Other
  

  Ferraris, Monica; Salvo, Milena; Smeacetto, Federico
  

• Analisi del comportamento flessionale di profilati scatolati, saldati a punti
  Proceeding
  

  Belingardi, Giovanni; P., Martella; Peroni, Lorenzo
  In: Titolo volume non avvalorato
  XXXIV Convegno Nazionale dell'Associazione Italiana per l'Analisi delle Sollecitazioni (Milano) 14-17 Settembre
  ISBN:9788890191619

• Analisi sperimentale del comportamento a fatica di una struttura sandwich composito-honeycomb
  Proceeding
  

  Belingardi, Giovanni; P., Martella; Peroni, Lorenzo
  In: Titolo volume non avvalorato
  XXXIV Convegno Nazionale dell'Associazione Italiana per l'Analisi delle Sollecitazioni (Milano) September, 14-17
  pp.10 ISBN:9788890191619

• Analisi termo-meccanica agli elementi finiti di una struttura investita da fasci di particelle ad alta energia
  Proceeding
  

  Dallocchio, Alessandro; A., Bertarelli; Peroni, Lorenzo
  In: Titolo volume non avvalorato
  XXXIV Convegno Nazionale dell'Associazione Italiana per l'Analisi delle Sollecitazioni (Milano) 14-17 Settembre 2005
  pp.10 ISBN:9788890191619

• METODOLOGIE SPERIMENTALI PER LA CARATTERIZZAZIONE DELLA RESISTENZA A TAGLIO DI GIUNZIONI PER MATERIALI CERAMICI AVANZATI E COMPOSITI CERAMICI
  Proceeding
  

  Avalle, Massimiliano; Ventrella, Andrea; Ferraris, Monica; Salvo, Milena
  In: Titolo volume non avvalorato
  AIAS (Associazione Italiana per l'Analisi delle Sollecitazioni)
  ASSOCIAZIONE ITALIANA PER L’ANALISI DELLE SOLLECITAZIONI, XXXIV CONVEGNO NAZIONALE (POLITECNICO DI MILANO) 14–17 SETTEMBRE 2005
  Vol.CD ISBN:9788890191619

• Considerations about the static strength prediction of the bonded joints
  Proceeding
  

  Goglio, Luca; Rossetto, Massimo
  In: Titolo volume non avvalorato
  19th Int. Symposium SWISS BONDING 05 23-25 May
  (pp.252-259)

• An integrated approach for virtual prototyping of manufactured flexible parts and related assemblies
  Proceeding
  

  Chiabert, Paolo; Conte, A.; DE MADDIS, Manuela; Lombardi, Franco; Orlando, Maurizio
  In: Titolo volume non avvalorato
  18th International Conference on Production Research August 2005
  ISBN:9788887030969

• A data driven methodology for supporting the design phase of forming tools
  Proceeding
  

  DE MADDIS, Manuela; Basuc, D.; Lombardi, Franco
  In: Titolo volume non avvalorato
  18th International Conference on Production Research August 2005
  ISBN:9788887030969

• Caratterizzazione sperimentale in campo dinamico di un adesivo epossidico bicomponente
  Proceeding
  

  Goglio, Luca; Peroni, Lorenzo; Peroni, Marco; Rossetto, Massimo
  In: Titolo volume non avvalorato
  XXXIV Convegno Nazionale AIAS 14-17 settembre 2005
  ISBN:9788890191619

• Heat treatment and failure risk of large automotive plastic molds: a fracture mechanics approach and property assessment
  Proceeding
  

  Firrao, Donato; Matteis, Paolo; Scavino, Giorgio; Ubertalli, Graziano; Ienco, M. G.; Parodi, A.; Pinasco, M. R.; Stagno, E.; Gerosa, R.; Rivolta, B.; Silva, G.; Ghidini, A.
  In: Heat treatment and surface engineering in automotive applications
  AIM (ITALIA)
  2nd International Conference - Heat Treatment and Surface Engineering in Automotive applications (Riva del Garda (TN), Italy) 20 - 22 giugno 2005
  pp.13 ISBN:9788885298545

• Numerical investigation on plastic collapse of thin walled beams subjected to biaxial bending
  Proceeding
  

  Belingardi, Giovanni; Peroni, Lorenzo
  In: Titolo volume non avvalorato
  COMPLAS VIII - Computational Plasticity
  (pp.299-302) ISBN:9788495999801

• Coach passenger injury risk during rollover: influence of the seat and the restraint system
  Proceeding
  

  Belingardi, Giovanni; Martella, P.; Peroni, Lorenzo
  In: Titolo volume non avvalorato
  19th International Technical Conference on the Enhanced Safety of Vehicles - ESV (Washington D.C.) June 6-9, 2005
  pp.13

• Impact behaviour of bonded built up beams: experimental results
  Article
  

  Belingardi, Giovanni; Goglio, Luca; Rossetto, Massimo
  INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
  Vol.25 pp.8 (pp.173-180) ISSN:0143-7496 DOI:10.1016/j.ijadhadh.2004.06.004

• Effetti di esplosioni di piccola carica sull’acciaio AISI 304Cu
  Article
  

  Firrao, Donato; Matteis, Paolo; Scavino, Giorgio; Ubertalli, Graziano; Ienco, M. G.; Pellati, G.; Piccardo, P.; Pinasco, M. R.; Stagno, E.; Montanari, R.; Tata, M. E.; Brandimarte, G.; Petralia, S.
  LA METALLURGIA ITALIANA
  Vol.97(3) (pp.9-22) ISSN:0026-0843

• Evaluation of the fatigue strength of notched specimens by the point and line methods with high stress ratios
  Article
  

  Chiandussi, Giorgio; Rossetto, Massimo
  INTERNATIONAL JOURNAL OF FATIGUE
  Vol.27 (pp.639-650) ISSN:0142-1123 DOI:10.1016/j.ijfatigue.2004.11.006

• AISI 304Cu steel subjected to small charge explosions: microstructural changes with limited or no macro-deformation
  Book chapter
  

  Firrao, Donato; Matteis, Paolo; Scavino, Giorgio; Ubertalli, Graziano; Ienco, M. G.; Pellati, G.; Piccardo, P.; Pinasco, M. R.; Stagno, E.; Montanari, R.; Tata, M. E.; Brandimarte, G.; Petralia, S.
  EPD Congress 2005
  TMS (The Minerals, Metals & Materials Society) (STATI UNITI D'AMERICA)
  (pp.83-97) ISBN:9780873395816

• Process to join carbon based materials to metals and its applications
  Patent
  

  Ferraris, Monica; Salvo, Milena; Casalegno, Valentina
  N.WO2005037734

• Oxidation protective coating for SiC fibre reinforced glass matrix composites
  Article
  

  Ferraris, Monica; Salvo, Milena; Peter, Ildiko; A. R., Boccaccini
  ADVANCED ENGINEERING MATERIALS
  Vol.6 [11] (pp.910-914) ISSN:1438-1656

• Evaluation of dynamic characteristic of materials by uniaxial tensile impact
  Proceeding
  

  Peroni, Lorenzo
  In: Advances in Experimental Mechanics
  ICEM12- 12th International Conference on Experimental Mechanics (Bari) 29 August/2 September 2004
  pp.10 ISBN:9788838662737

• Deep-drawing influence on crash behaviour of metal sheet parts
  Proceeding
  

  Basuc, F.; Perona, P.; Lombardi, Franco
  In: Titolo volume non avvalorato
  4th CIRP International Computation in Manufacturing Engineering (ICME 04) 30th June- 2nd July, 2004
  (pp.283-286) ISBN:9788887030792

• The Influence of Manufacturing Process and Material Quality on Crash Behaviour of Sheet Metal Parts
  Proceeding
  

  Basuc, F.; Lombardi, Franco
  In: Titolo volume non avvalorato
  Intl. Conf. on Manufacturing Systems (ICMaS 2004) 7 - 8 October 2004
  (pp.489-492) ISBN:9789732711026

• Analysis of Technological and Geometrical Parameters of Sheet Metal Stamping Processes
  Proceeding
  

  Basuc, D; Lombardi, Franco
  In: 30th International Conference on Manufacturing Systems
  Intl. Conf. on Manufacturing Systems (ICMaS 2004) (Bucharest) 7 - 8 October 2004
  (pp.485-488) ISBN:9789732711026

• Dynamical aspects regarding the ceramic ball bearings used in machine tools main spindle bearings
  Proceeding
  

  Ghinea, M.; Lombardi, Franco
  In: Titolo volume non avvalorato
  DAAAM 2004 European Conference 3 - 6th November 2004
  

• Springback control in stamping car body parts
  Proceeding
  

  DE MADDIS, Manuela; Basuc, D.; Lombardi, Franco
  In: Titolo volume non avvalorato
  4th CIRP International Computation in Manufacturing Engineering (ICME 04) 30th June- 2nd July, 2004
  (pp.263-268) ISBN:9788887030792

• A simple failure criterion for the design of adhesive joints
  Proceeding
  

  Goglio, Luca; Rossetto, Massimo; Dragoni, E.
  In: Titolo volume non avvalorato
  Structural Adhesives in Engineering - 7th International Conference (SAE VII) Bristol, UK, 13 – 15 July 2004
  (pp.76-79)

• Flexural behaviour of a polymeric foam/glass-fiber composite: FE modelling and experimental testing
  Proceeding
  

  Belingardi, Giovanni; Cavatorta, Maria Pia; Peroni, Lorenzo
  In: Titolo volume non avvalorato
  WIT PRESS (REGNO UNITO DI GRAN BRETAGNA)
  SECOND INTERNATIONAL CONFERENCE ON HIGH PERFORMANCE STRUCTURES AND MATERIALS (Ancona (Italy)) 31 MAY- 2 JUNE 2004
  (pp.3-12) ISBN:9781853127175

• Friction and wear behaviour of sintered steels submitted to sliding and abrasion tests.
  Proceeding
  

  L., Ceschini; G., Palombarini; G., Sambogna; Firrao, Donato; Scavino, Giorgio; Ubertalli, Graziano
  In: Titolo volume non avvalorato
  AIM (ITALIA)
  4TH AIMETA Int. Tribology Conf.. (Roma) 14-17 September 2004
  Vol.1 pp.10 (pp.1-10)

• The Influence of Manufacturing Process and Material Quality on Crash Behaviour of Sheet Metal Parts
  Article
  

  Basuc, F.; Lombardi, Franco
  REVUE ROUMAINE DES SCIENCES TECHNIQUES. SERIE DE MECANIQUE APPLIQUEE
  (pp.489-492) ISSN:0035-4074

• Analysis of Technological and Geometrical Parameters of Sheet Metal Stamping
  Article
  

  Basuc, D.; Lombardi, Franco
  REVUE ROUMAINE DES SCIENCES TECHNIQUES. SERIE DE MECANIQUE APPLIQUEE
  Vol.49 (pp.485-488) ISSN:0035-4074

• Comparison of fatigue data using the maximum likelihood method
  Article
  

  Goglio, Luca; Rossetto, Massimo
  ENGINEERING FRACTURE MECHANICS
  Vol.71 pp.12 (pp.725-736) ISSN:0013-7944

• Direct joining of CFC to copper
  Article
  

  Appendino, Pietro; Ferraris, Monica; Casalegno, Valentina; Salvo, Milena; Merola, M.; Grattarola, M.
  JOURNAL OF NUCLEAR MATERIALS
  Vol.329-333 pp.4 (pp.1563-1566) ISSN:0022-3115 DOI:10.1016/j.jnucmat.2004.04.313

• Oxidation Protective Glass-Ceramic Coating for SiC Fibre Reinforced Glass Matrix Composites
  Article
  

  Ferraris, Monica; Salvo, Milena; I., Matekovits; A. R., Boccaccini
  ADVANCED ENGINEERING MATERIALS
  Wiley
  Vol.11 pp.5 (pp.910-914) ISSN:1438-1656 DOI:10.1002/adem.200400106

• Production of glass-ceramic bodies from the bottom ashes of municipal solid waste incinerators
  Article
  

  Appendino, Pietro; Ferraris, Monica; Matekovits, I.; Salvo, Milena
  JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
  Elsevier
  Vol.24 pp.8 (pp.803-810) ISSN:0955-2219 DOI:10.1016/S0955-2219(03)00264-4

• Vetrificazione e riutilizzo di ceneri provenienti da inceneritori di rifiuti solidi urbani
  Article
  

  Appendino, Pietro; Ferraris, Monica; Matekovits, I.; Salvo, Milena; Veglia, M.; Buzzi, L.
  ENCO JOURNAL
  Vol.26 pp.5 (pp.27-31)

• Experimental investigation of plastic collapse of aluminium extrusions in biaxial bending
  Book chapter
  

  Belingardi, Giovanni; Peroni, Lorenzo
  Structures under shock and impact VIII, Series Structures and Materials
  pp.10 ISBN:9781853127069 DOI:10.2495/SU040311

• Joining of ceramic matrix composites for fusion application
  Proceeding
  

  Ferraris, Monica; P., Appendino; Casalegno, Valentina; F., Smeacetto; Salvo, Milena
  In: Adv. Sci. Technol. 33 (2003) 141-152. ISBN: 88-86538-35-9
  Vol.33 (pp.141-152) ISBN:9788886538350

• Rivestimenti vetroceramici antiusura per leghe di alluminio
  Patent
  

  Ferraris, Monica; Peter, Ildiko; Salvo, Milena; Auger, S.
  N.TO2003A000439

• Sintered glass-ceramics from incinerator fly ashes. Part. II. The influence of the particle size and heat-treatment on the properties
  Article
  

  Karamanov, A.; Pelino, M.; Salvo, Milena; Peter, Ildiko
  JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
  Vol.23 [10] pp.7 (pp.1609-1615) ISSN:0955-2219

• Development of a new technique to join C/C to copper
  Other
  

  Appendino, P; Casalegno, Valentina; Ferraris, Monica; Grattarola, M; Merola, M; Salvo, Milena
  

• The Barkhausen method for residual strss control
  Proceeding
  

  Scavino, Giorgio; Ubertalli, Graziano; A., DI VINCENZO
  In: Titolo volume non avvalorato
  4° International Conference on Barkhausen noise and micromagnetic testing 3-4 luglio 2003
  pp.10 (pp.369-378) ISBN:9789519840055

• Effetto degli elementi di lega e delle diverse condizioni di sinterizzazione su campioni nitrocarburati
  Proceeding
  

  Scavino, Giorgio; D., Firrao; Ubertalli, Graziano; Rosalbino, Francesco; L., Mura; C., Verniani
  In: Titolo volume non avvalorato
  19° Convegno nazionale Trattamenti Termici 20-22 maggio 2003
  pp.11 (pp.91-101) ISBN:9788885298484

• Preliminary results on damage tolerance in fatigue tests of gamma-TiAl valves
  Proceeding
  

  Marino, Francesco; Guerra, M; Rebuffo, A; Rossetto, Massimo; Vicario, V.
  In: Titolo volume non avvalorato
  TMS (The Mineral, Metals & Materials Society) (STATI UNITI D'AMERICA)
  Gamma Titanium Aluminides 2003 (San Diego (USA)) March
  (pp.531-537) ISBN:9780873395434

• Considerazioni sull’applicazione del metodo di Taylor in presenza di tensioni medie elevate
  Proceeding
  

  Chiandussi, Giorgio; Mezzina, D; Rossetto, Massimo
  In: Atti del XXXII Convegno Nazionale AIAS
  XXXII Convegno Nazionale AIAS (Salerno) Settembre
  pp.10 (pp.045, 1-10) ISBN:9788887030648

• Un criterio di resistenza statica dei giunti incollati basato sulle tensioni efficaci
  Proceeding
  

  Goglio, Luca; Rossetto, Massimo
  In: Atti XXXII Convegno Nazionale AIAS
  XXXII Convegno Nazionale AIAS (Salerno) Settembre
  pp.9 (pp.099, 1-9) ISBN:9788887030648

• Mechanical characterisation of aluminium foam made by compact powder technology:static and dynamic behaviour and FEM analysis evaluation
  Proceeding
  

  G. B., Broggiato; F., Campana; Peroni, Lorenzo
  In: Cellular metals: manufacture, properties, applications. International Confrerence MetFoam
  METFOAM 2003 (Berlin) 23.6. - 25.6.2003
  pp.10 ISBN:9783935538121

• SIMULAZIONE NUMERICA DI ELEMENTI MECCANICI CON INSERTI IN SCHIUMA DI ALLUMINIO
  Proceeding
  

  F., Campana; L., Cortese; Peroni, Lorenzo
  In: Titolo volume non avvalorato
  XXXII Convegno Nazionale AIAS (Salerno)
  pp.10 ISBN:9788887030648

• On the convergence of simulation results in the numerical modelling of the plastic collapse of thin walled structures
  Proceeding
  

  Peroni, Lorenzo; M., Martella; D., Gastaldin
  In: Titolo volume non avvalorato
  D.R.J. Owen, E. Oñate, CIMNE
  VII International Conference on Computational Plasticity, COMPLAS 2003 (Barcelona, Spain) April 7- 10, 2003
  pp.10 ISBN:9788495999221

• Estensioni dell’algoritmo di Crisfield per l’integrazione delle equazioni del moto non lineari di sistemi meccanici
  Proceeding
  

  Peroni, Lorenzo; R., Vadori
  In: Titolo volume non avvalorato
  XXXII Convegno Nazionale AIAS (Salerno) 3-6 settembre 200
  pp.10 ISBN:9788887030648

• Flexural behaviour of a polymeric foam/glass-fiber composite sandwich
  Proceeding
  

  Peroni, Lorenzo; R., Duella
  In: ETDCM6
  Sixth International Seminar on EXPERIMENTAL TECHNIQUES AND DESIGN IN COMPOSITE MATERIALS (Vicenza) 18-20th June, 2003
  

• The influence of the materials behaviour on the FEM crash results
  Proceeding
  

  F., Basuc; P., Perona; Lombardi, Franco
  In: Titolo volume non avvalorato
  BRAMAT 2003 13-14 march
  

• New developments in 2D-3D FEM simulation of the close die forging processes
  Proceeding
  

  D., Basuc; Lombardi, Franco
  In: Titolo volume non avvalorato
  BRAMAT 2003 13-14 march
  

• Comparison of different joining techniques in a crashworthiness perspective
  Proceeding
  

  Avalle, Massimiliano; Goglio, Luca; Mauri, M.
  In: Titolo volume non avvalorato
  Publications Office of the European Union
  European vehicle passive safety network
  

• Effetto degli elementi di lega e delle diverse condizioni di sinterizzazione su campioni termochimicamente trattati
  Proceeding
  

  Scavino, Giorgio; Firrao, Donato; Ubertalli, Graziano; Rosalbino, Francesco; L., Mura; C., Verniani
  In: Titolo volume non avvalorato
  19° Convegno Nazionale Trattamenti Termici AIM 20-22 maggio 2003
  pp.10 (pp.63-72) ISBN:9788885298484

• INDAGINE SPERIMENTALE SUL COLLASSO PLASTICO FLESSIONALE DI STRUTTURE IN PARETE SOTTILE
  Proceeding
  

  Belingardi, Giovanni; Peroni, Lorenzo
  In: Titolo volume non avvalorato
  XXXII Convegno Nazionale AIAS (Salerno) 3-6 settembre 2003
  pp.10 ISBN:9788887030648

• Multibody analysis of M3 bus rollover: structural behaviour and passenger injury risk
  Proceeding
  

  Peroni, Lorenzo; Gastaldin, D.; Martella, P.; Belingardi, Giovanni
  In: Titolo volume non avvalorato
  18th International Technical Conference on the Enhanced Safety of Vehicles - ESV (Nagoya, Japan) May 19-22, 200
  pp.12

• Joining of C/C composites to copper
  Article
  

  Appendino, Pietro; Casalegno, Valentina; Ferraris, Monica; Grattarola, M.; Merola, M.; Salvo, Milena
  FUSION ENGINEERING AND DESIGN
  Vol.66-68 pp.5 (pp.225-229) ISSN:0920-3796 DOI:10.1016/S0920-3796

• Multilayer coating with self-sealing properties for carbon-carbon composites
  Article
  

  Smeacetto, Federico; Ferraris, Monica; Salvo, Milena
  CARBON
  Vol.41 pp.7 (pp.2105-2111) ISSN:0008-6223 DOI:10.1016/S0008-6223

• Collasso plastico di strutture in parete sottile: modelli ed indagini sperimentali
  Other
  

  Peroni, Lorenzo
  

• Processo per realizzare un rivestimento composito vetroceramico per leghe di alluminio
  Patent
  

  Ferraris, Monica; Salvo, Milena; I., Matekovits; S., Augier
  N.TO2003A000439

• Oxidation barrier multilayer coatings for carbon-carbon composites
  Proceeding
  

  Smeacetto, Federico; Ferraris, Monica; Salvo, Milena
  CERAMIC ENGINEERING AND SCIENCE PROCEEDINGS
  In: Titolo volume non avvalorato
  Wiley
  26th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures (Cocoa Beach (USA)) January 13-18, 2002
  Vol.23 (4) pp.8 (pp.477-484) ISSN:0196-6219 ISBN:9780470294758 DOI:10.1002/9780470294758.ch53

• Vetro-ceramici da rifiuti industriali con additivi refrattari
  Proceeding
  

  A., Karamanov; M., Aloisi; M., Pelino; Ferraris, Monica; Salvo, Milena
  In: Titolo volume non avvalorato
  6. Congresso AIMAT (Modena (ITA)) 8-11 Set. 2002
  ISBN:9788888679006

• Giunzione di materiali compositi a matrice ceramica per applicazioni nel settore della fusione termonucleare controllata
  Proceeding
  

  Appendino, Pietro; Casalegno, Valentina; Ferraris, Monica; M., Montorsi; Salvo, Milena; Smeacetto, Federico
  In: Titolo volume non avvalorato
  6. Congresso AIMAT (Modena (ITA)) 8-11 Set. 2002
  ISBN:9788888679006

• Joining of ceramic matrix composites for fusion application
  Proceeding
  

  Ferraris, Monica; Appendino, Pietro; Casalegno, Valentina; Smeacetto, Federico; Salvo, Milena
  In: Proceedings CIMTEC 2002
  CIMTEC 2002 (Firenze (Italy)) 14-18 July 2002
  

• CARATTERIZZAZIONE DI SCHIUME DI ALLUMINIOPER LA REALIZZAZIONE DI DISSIPATORI DI ENERGIA
  Proceeding
  

  G. B., Broggiato; F., Campana; L., Cortese; Peroni, Lorenzo
  In: Titolo volume non avvalorato
  XXXI Convegno Nazionale AIAS (Parma) 18-21 Settembre
  pp.10

• Cordierite–mullite coating for SiCf/SiC composites
  Article
  

  Ferraris, Monica; Salvo, Milena; Smeacetto, Federico
  JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
  Vol.22 pp.5 (pp.2343-2347) ISSN:0955-2219 DOI:10.1016/S0955-2219

• Strain-rate effects on the energy absorption capability of crash boxes with different geometry
  Proceeding
  

  Peroni, L.; Avalle, Massimiliano; Petrella, V; Monacelli, G.
  In: Titolo volume non avvalorato
  Structures under Shock and Impact VII
  (pp.259-268) ISBN:9781853129117

• Properties of joints between ceramic materials with GLASS INTERAYER
  Proceeding
  

  Esposito, L.; Salvo, Milena
  In: Titolo volume non avvalorato
  6th International Conference on Joining Ceramics, Glass and Metal Munich, Germany, 30 Sept- 1 Oct. 2002
  Vol.unico

• Problematiche nella modellazione numerica di fenomeni di collasso plastico di strutture in parete sottile
  Proceeding
  

  Peroni, Lorenzo; M., Martella; D., Gastaldin
  In: Titolo volume non avvalorato
  XXXI Convegno Nazionale AIAS (Parma) 18 - 21 settembre 2002
  pp.10

• Vetrificazione di scorie provenienti da inceneritori urbani e loro utilizzo per la produzione di materiali utilizzabili nel settore delle infrastrutture civili
  Proceeding
  

  Appendino, Pietro; Ferraris, Monica; Peter, Ildiko; Salvo, Milena
  In: Titolo volume non avvalorato
  6. Congresso AIMAT (Modena (ITA)) 8-11 Set. 2002
  ISBN:9788888679006

• The influence of the ceramic materials used at the main spindle bearings on the machine tool performances
  Proceeding
  

  M., Ghinea; Lombardi, Franco
  In: Titolo volume non avvalorato
  AMME 2002 15-18 December
  

• Sul comportamento strutturale di travi scatolate con giunzioni adesive: risultati sperimentali di prove d’impatto
  Proceeding
  

  Belingardi, Giovanni; Goglio, Luca; Rossetto, Massimo
  In: Atti del XXXI Convegno Nazionale AIAS
  XXXI Convegno Nazionale AIAS (Parma (I)) 18-21 settembre 2002
  pp.10 (pp.1-10)

• Un possibile criterio per il calcolo della resistenza statica dei giunti incollati
  Proceeding
  

  Goglio, Luca; Rossetto, Massimo; Dragoni, E.
  In: Atti del XXXI Convegno Nazionale AIAS
  XXXI Convegno Nazionale AIAS (Parma (I)) 18-21 settembre 2002
  pp.10 (pp.1-10)

• Ultrasonic testing of anaerobic bonded joints
  Article
  

  Goglio, Luca; Rossetto, Massimo
  ULTRASONICS
  Vol.40 (pp.205-210) ISSN:0041-624X

• Oxidation protective multilayer coatings for carbon-carbon composites
  Article
  

  Smeacetto, Federico; Salvo, Milena; Ferraris, Monica
  CARBON
  Pergamon
  Vol.40 pp.5 (pp.583-587) ISSN:0008-6223 DOI:10.1016/S0008-6223(01)00151-8

• A test rig for frictionally damped bladed segments
  Article
  

  Berruti, TERESA MARIA; Filippi, S.; Goglio, Luca; Gola, Muzio; Salvano, S.
  JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER
  Vol.124 (pp.388-394) ISSN:0742-4795

• Investigating the effect of spew and chamfer size on the stresses in metal/plastics adhesive joints
  Article
  

  Belingardi, Giovanni; Goglio, Luca; Tarditi, A.
  INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
  Elsevier
  Vol.22 pp.10 (pp.273-282) ISSN:0143-7496 DOI:10.1016/S0143-7496(02)00004-0

• Strain-rate effects on the energy absorption capability of crash boxes with different geometry
  Book chapter
  

  Peroni, Lorenzo; Avalle, Massimiliano; V., Petrella; G., Monacelli
  Structures under Shock and Impact VII
  N. JONES, The University of Liverpool, United Kingdom and C. A. BREBBIA, Wessex Institute of Technology, United Kingdom and A. M. RAJENDRAN, US Army Research Laboratory, USA
  Vol.11 pp.10 (pp.259-268) ISBN:9781853129117 DOI:10.2495/SU020251

• Introduzione alla Fotoelasticità
  Book
  

  Rossetto, Massimo
  Levrotto & Bella
  pp.56

• Quando si romperà?
  Article
  

  Firrao, Donato; Rossetto, Massimo
  LA STAMPA
  La Stampa
  Vol.2001 pp.1 ISSN:1122-1763

• Structure and properties of sintered glass-ceramics from incinerator fly-ashes
  Proceeding
  

  A., Karamanov; A., Vitale; M., Pelino; Ferraris, Monica; Salvo, Milena
  In: Proceedings of VARIREI 2001
  ed. M. Pelino (ITALIA)
  VARIREI 2001 (L’AQUILA) June 2001
  (pp.128-133)

• Vitrification and use of wastes for the production of glass-ceramics
  Proceeding
  

  Appendino, Pietro; Ferraris, Monica; Peter, Ildiko; Salvo, Milena
  In: Proceedings of VARIREI 2001
  VARIREI 2001 (L'Aquila (Italy)) June 2001
  (pp.79-82)

• Recycling solid wastes as building materials
  Proceeding
  

  Appendino, Pietro; Ferraris, Monica; Peter, Ildiko; Salvo, Milena; E., Belmondo; S., Guicciardi
  In: Proceedings of the 7th Eur.Conf. on Advanced Materials and Processes, EUROMAT 2001
  EUROMAT 2001 (Rimini (ITA)) 10-14 Giugno 2001
  

• Joining of Ceramic Oxides with Glass interlayers
  Proceeding
  

  Laura, Esposito; Alida, Bellosi; Ferraris, Monica; Salvo, Milena
  In: Proceedings of EUROMAT 2001
  Vincenzini (ITALIA)
  EUROMAT 2001 (Rimini-Italy) June 2001
  

• Safety aspects of joints and coatings for plasma facing components with composite structures
  Article
  

  Zucchetti, Massimo; Ferraris, Monica; Salvo, Milena
  FUSION ENGINEERING AND DESIGN
  Elsevier BV:PO Box 211, 1000 AE Amsterdam Netherlands
  Vol.58-59 pp.5 (pp.939-943) ISSN:0920-3796 DOI:10.1016/S0920-3796(01)00519-1

• Glass matrix composites from solid waste materials
  Article
  

  Ferraris, Monica; Salvo, Milena; Smeacetto, Federico; Augier, L.; Barbieri, L.; Corradi, A.; Lancellotti, I.
  JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
  Vol.21 [4] pp.8 (pp.453-460) ISSN:0955-2219 DOI:10.1016/S0955-2219(00)00236-3

• Sviluppo di tecnologie di processo per la fabbricazione di componenti metallo- plastici destinati ad applicazioni autoveicolistiche
  Other
  

  Belingardi, Giovanni; Goglio, Luca; Rossetto, Massimo
  

• Protective coating for carbon-carbon composites
  Book chapter
  

  Smeacetto, Federico; Ferraris, Monica; Salvo, Milena
  High Temperature Ceramic Matrix Composites
  Wiley-VCH Verlag GmbH. (GERMANIA)
  Vol.unico (pp.240-244) ISBN:9783527303205 DOI:10.1002/3527605622.ch39

• Multibody analysis of the structural behaviour of a M3 bus in a rollover accident.
  Proceeding
  

  Peroni, L; Giorda, Andrea; Martella, P; Vadori, R.
  In: Book of abstract of EUROMECH Colloquium
  EUROMECH Colloquium (École Normale Supérieure, Cachan, France) 24 - 27 settembre 2001
  

• Analisi del comportamento strutturale di un bus in condizioni di roll-over con il metodo multibody.
  Proceeding
  

  Peroni, Lorenzo; Giorda, Andrea; Martella, P; Vadori, R.
  In: Atti del XXX Convegno Nazionale AIAS
  XXX Convegno Nazionale AIAS (Alghero) 12 -15 Settembre 2001
  pp.10

• Comparison of fatigue data using the maximum likelihood method
  Proceeding
  

  Goglio, Luca; Rossetto, Massimo
  In: Advances Fracture and Damage Mechanics II - Guagliano M. and Alibaldi M.H. Ed.
  Hoggar (SVIZZERA)
  Advances Fracture and Damage Mechanics II (Milano) Settembre
  pp.6 (pp.101-106) ISBN:9782940130146

• FEM and experimental analysis of industrial forming processes
  Proceeding
  

  D., Basuc; Lombardi, Franco
  In: Titolo volume non avvalorato
  A.T.T. Congress and Exhibition October 1- 3
  

• Analisi e confronto di dati di fatica con il metodo della massima verosimiglianza
  Proceeding
  

  Goglio, Luca; Rossetto, Massimo
  In: Atti del XXX Convegno Nazionale AIAS
  XXX Convegno Nazionale AIAS (Alghero) Settembre
  pp.11 (pp.323-333)

• Basic issues for a new Geometrical Product Specification language
  Proceeding
  

  Chiabert, Paolo; Lombardi, Franco; Orlando, Maurizio
  In: Titolo volume non avvalorato
  XII ADM International Conference September 5-7, 2001
  (pp.1-8)

• About a CAT model consistent with ISO/TC213 last issues
  Proceeding
  

  Chiabert, Paolo; Lombardi, Franco; Orlando, M.
  In: Titolo volume non avvalorato
  10th International Scientific Conference AMME'2001 December 9-13, 2001
  (pp.65-68)

• Plasma Treatments Effected on Sintered Steels.
  Proceeding
  

  D., Firrao; Scavino, Giorgio; Ubertalli, Graziano; E., Cordano; L., Mura; C., Verniani
  In: Titolo volume non avvalorato
  EUROMAT 2001 10-14 June
  ISBN:9788885298392

• Studio del collasso flessionale di profilati in parete sottile sottoposti a flessione deviata
  Proceeding
  

  Belingardi, Giovanni; Peroni, Lorenzo
  In: Titolo volume non avvalorato
  XXX Congresso Nazionale AIAS (Alghero) 12 - 15 settembre 2001
  pp.10

• Controllo a ultrasuoni dell'incollaggio di lamiere: recenti sviluppi
  Article
  

  Goglio, Luca; Rossetto, Massimo
  LAMIERA
  Vol.38 (7) (pp.104-117) ISSN:0391-5891

• Influence of cutting parameters on residual stresses induced by milling in pressure die-cast aluminium alloy components
  Article
  

  Berruti, TERESA MARIA; Ubertalli, Graziano
  JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING
  ASME
  Vol.123 pp.5 (pp.547-551) ISSN:1087-1357 DOI:10.1115/1.1383552

• Hermetic and self-sealing double-layer coating for SiC/SiC
  Proceeding
  

  Ferraris, Monica; B., Riccardi; Salvo, Milena; Smeacetto, Federico
  In: 4th International Energy Agency Workshop on SiC/SiC Ceramic Matrix Composites for fusion Structural Applications
  Editors B. Riccardi, R.H. Jones e A. Kohyama
  4th International Energy Agency Workshop on SiC/SiC Ceramic Matrix Composites for fusion Structural (Frascati) 12-13 ottobre
  (pp.213-219)

• Glass coating for SiCf/SiC composites for high temperature application
  Article
  

  Ferraris, Monica; Montorsi, M.; Salvo, Milena
  ACTA MATERIALIA
  Vol.48 pp.4 (pp.4721-4724) ISSN:1359-6454 DOI:10.1016/S1359-6454(00)00263-9

• Possible evidence of charge-stripe ordering in the ab-plane resistivity of strongly underdoped La_(2-x)Sr_(x)CuO_4 single crystals.
  Article
  

  Daghero, Dario; Gonnelli, Renato; Morello, A.; Ummarino, Giovanni; Natale, L.; Stepanov, V. A.; Licci, F.; Ubertalli, Graziano
  INTERNATIONAL JOURNAL OF MODERN PHYSICS B
  WORLD SCIENTIFIC
  Vol.14 pp.6 (pp.2779-2784) ISSN:0217-9792 DOI:10.1142/S0217979200002892

• Sviluppo di un sistema optoelettronico per il rilievo di grandi deformazioni in prove di trazione dinamiche
  Proceeding
  

  Peroni, Lorenzo; Vadori, R.; Avalle, Massimiliano
  In: Titolo volume non avvalorato
  Centro editoriale toscano
  AIAS 2000 : 29. Convegno nazionale dell'Associazione italiana per l'analisi delle sollecitazioni (Lucca) 6-9 settembre 2000
  pp.10 (pp.1073-1082) ISBN:9788879571555

• A New Hybrid Methodology for Motion Emulation in Virtual Environments
  Proceeding
  

  Costa, Mario; Lombardi, Franco; Montuori, Alfonso; Pasero, Eros Gian Alessandro
  In: Titolo volume non avvalorato
  International Conference on Computer Graphics & Vision (GraphiCon'2000) 28 Agosto -2 Settembre
  pp.7 (pp.242-248)

• FEM and experimental analysis of a sheet metal forming process for an automotive part
  Proceeding
  

  D., Basuc; Chiabert, Paolo; Lombardi, Franco
  In: Titolo volume non avvalorato
  VII Nat. Conf. on Technologies and Machine-Tools for Cold Metal Forming TPR2000 Cluj-Napoca (RO), 11-12 May
  

• Confronto fra tecniche di controllo con ultrasuoni di giunzioni incollate con adesivi anaerobici
  Proceeding
  

  Goglio, Luca; Rossetto, Massimo
  In: Atti del XXIX Convegno AIAS
  XXIX Convegno AIAS (Lucca) Settembre
  pp.10 (pp.1051-1060) ISBN:9788879571555

• Simulazione su banco di prova del comportamento dinamico di palette di turbina smorzate per attrito
  Proceeding
  

  Berruti, TERESA MARIA; Filippi, S.; Goglio, Luca; Gola, Muzio
  In: Titolo volume non avvalorato
  Centro editoriale toscano
  AIAS 2000 : 29. Convegno nazionale dell'Associazione italiana per l'analisi delle sollecitazioni (Lucca) 6-9 settembre 2000
  pp.11 (pp.201-211) ISBN:9788879571555

• A test rig for frictionally damped bladed segments
  Proceeding
  

  Berruti, TERESA MARIA; Filippi, S; Goglio, Luca; Gola, Muzio; Salvano, S.
  In: Titolo volume non avvalorato
  ASME TURBO EXPO 2000 2000
  (pp.1-8) ISBN:9780791819906

• On the optimization of single lap metal/plastics adhesive joints
  Proceeding
  

  Belingardi, Giovanni; Goglio, Luca; Tarditi, A.
  In: Titolo volume non avvalorato
  5th Seminar on Exp. Tech. and Design in Composite Materials - Cagliari Settembre
  (pp.161-172)

• Microstructure and Mechanical Properties of Low-Activation Glass-Ceramic Joining and Coating for SiC/SiC Composites
  Article
  

  Katoh, Y.; Kotani, M.; Kohyama, A.; Appendino, Margherita; Salvo, Milena; Ferraris, Monica
  JOURNAL OF NUCLEAR MATERIALS
  Vol.283-287 pp.5 (pp.1262-1266) ISSN:0022-3115 DOI:10.1016/S0022-3115(00)00096-9

• ab-plane resistivity and possible charge stripe ordering in strongly underdoped La2-xSrxCuO4 single crystals
  Article
  

  Gonnelli, Renato; V. A., Stepanov; A., Morello; Ummarino, Giovanni; Daghero, Dario; Natale, Luca; Francesca, Licci; Ubertalli, Graziano
  PHYSICA. C, SUPERCONDUCTIVITY
  ELSEVIER
  Vol.341-348 pp.2 (pp.1779-1780) ISSN:0921-4534 DOI:10.1016/S0921-4534(00)01037-6

• High temperature behaviour of a Ti-6Al-4V/TiCp composite processed by BE-CIP-HIP method
  Article
  

  Badini, CLAUDIO FRANCESCO; Ubertalli, Graziano; Puppo, D.; Fino, Paolo
  JOURNAL OF MATERIALS SCIENCE
  Vol.35 (pp.3903-3912) ISSN:0022-2461

• Degradation at 1200°C of a SiC coated 2D-Nicalon/C/SiC composite processed by SICFILL method
  Article
  

  Badini, CLAUDIO FRANCESCO; Fino, Paolo; Ubertalli, Graziano; Taricco, F.
  JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
  Vol.20 (pp.1505-1514) ISSN:0955-2219

• Introduzione alla fatica dei materiali e dei componenti meccanici
  Book
  

  Rossetto, Massimo
  Levrotto & Bella (ITALIA)
  pp.184 ISBN:9788882180614

• Fatigue behaviour of sintered stainless steels with different level of porosity
  Article
  

  Rosso, M.; Rossetto, M.; Goglio, L.; Radici, F.
  LA METALLURGIA ITALIANA
  Edimet
  Vol.91 pp.9 (pp.49-57) ISSN:0026-0843

• Influenza della modifica con boro sul comportamento a nitrurazione di leghe ferro-molibdeno sinterizzate
  Proceeding
  

  Rosso, Mario; Ubertalli, Graziano; J., KARWAN BACZEWSKA
  In: Titolo volume non avvalorato
  AIM
  17° Convegno Nazionale Trattamenti Termci (Salsomaggiore) 5-7 Maggio 1999
  pp.9 (pp.279-287) ISBN:9788885298330

• The ab-plane resistivity of strongly underdoped and Pt-substituded LaSrCuO single crystals
  Other
  

  Gonnelli, Renato; Stepanov, V. A.; Morello, A; Ummarino, Giovanni; Licci, Francesca; Ubertalli, Graziano
  

• Methods for reducing the lead time of tool and die design
  Proceeding
  

  Antonelli, Dario; Cantamessa, Marco; Lombardi, Franco; Perotti, G.
  In: Atti del IV AITEM
  IV AITEM (Brescia)
  (pp.167-174)

• Influence of sintering parameters and post sintering treatments on the mechanical properties of stainless steels
  Article
  

  Rosso, Mario; Rossetto, Massimo; Goglio, Luca; Radici, F.
  MATERIÁLOVÉ INžINIERSTVO
  Strojníca fakulta Žilinskej univerzity
  Vol.6 pp.8 (pp.11-18) ISSN:1335-0803

• Improvement of fatigue proprieties of PM AISI 316L stainless steels throught contact infiltration
  Proceeding
  

  Rosso, Mario; Rossetto, Massimo; Goglio, Luca; Radici, F.
  In: Titolo volume non avvalorato
  Int. Conference Deformation and fracture in structural PM materials - DFPM'99 September
  (pp.233-240)

• Controllo ultrasonoro di incollaggi con adesivi anaerobici
  Proceeding
  

  Goglio, Luca; Rossetto, Massimo
  In: Atti del XXVIII Convegno AIAS
  XXVIII Convegno AIAS (Vicenza) Settembre
  pp.10 (pp.877-886)

• Forced vibrations of frictionally damped stator segments
  Proceeding
  

  Berruti, TERESA MARIA; Filippi, S.; Goglio, Luca; Gola, Muzio
  In: Titolo volume non avvalorato
  44th ASME Gas Turbine and Aeroengine Technical Congress (Indianapolis (USA)) June 7-10, 1999
  

• A Method for reducing the lead time of tool and die design
  Proceeding
  

  Antonelli, Dario; Cantamessa, Marco; Lombardi, Franco; Perotti, G.
  In: Titolo volume non avvalorato
  AITEM, Brescia 13 - 15 settembre
  (pp.167-174)

• Comportamento a fatica di acciai inossidabili sinterizzati a differente grado di porosità
  Article
  

  Rosso, Mario; Rossetto, Massimo; Goglio, Luca; Radici, F.
  LA METALLURGIA ITALIANA
  Vol.6/99 (pp.49-59) ISSN:0026-0843

• Comportamento a fatica di acciai sinterizzati a differente grado di porosità
  Article
  

  Rosso, M.; Rossetto, Massimo; Goglio, Luca; Radici, F.
  LA METALLURGIA ITALIANA
  Vol.91 (pp.49-59) ISSN:0026-0843

• Ultrasonic testing of adhesive bonds of thin metal sheets
  Article
  

  Goglio, Luca; Rossetto, Massimo
  NONDESTRUCTIVE TESTING AND EVALUATION
  Vol.32 (pp.323-331) ISSN:1058-9759

• Lateral compression of thin walled tubes: strain measurement by image analysis
  Article
  

  Avalle, Massimiliano; Goglio, Luca
  EXPERIMENTAL MECHANICS
  Vol.39 (pp.232-236) ISSN:0014-4851

• Was it a bomb? A reply from the microscope
  Article
  

  Firrao, Donato; Ubertalli, Graziano; Cordano, E.
  TECHNOLOGY, LAW AND INSURANCE
  Vol.4 pp.8 (pp.23-30) ISSN:1359-9372

• Benefits of geometric dimensioning and tolerancing
  Article
  

  Chiabert, P.; Lombardi, F.; Orlando, M.
  JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
  ELSEVIER
  Vol.78 pp.7 (pp.29-35) ISSN:0924-0136 DOI:10.1016/S0924-0136(97)00459-7

• Rivestimenti Autocicatrizzanti per Compositi Ceramici Operanti ad Alte Temperature
  Proceeding
  

  Ferraris, Monica; Salvo, Milena; C., Isola; M., APPENDINO MONTORSI; S., Godny
  In: Congresso AIMAT 98
  PTM editrice, (ITALIA)
  Congresso AIMAT 98 (Chia (CA), Italy) June 1998
  

• Self-healing glassy coatings for SiC/SiC composites
  Proceeding
  

  Ferraris, Monica; Salvo, Milena; C., Isola; M., APPENDINO MONTORSI
  In: European Conference on Composite Materials 1998
  Woodhead Publishing
  ECCM 8, European Conference on Composite Materials 1998 (Naples (ITA)) 3-6 June 1998
  pp.8 (pp.299-306)

• Influence of microstructure on the fracture behaviour of hot working tool steels nitrided layers
  Proceeding
  

  Firrao, Donato; Rosso, Mario; Scavino, Giorgio; Ubertalli, Graziano
  In: Titolo volume non avvalorato
  AIM (ITALIA)
  11th Congress of the International Federation for Heat Treatment and Surface Engineering : 4th ASM Heat Treatment and Surface Engineering Conference in Europe (Florence (ITA)) 19-21 October, 1998
  Vol.1 pp.14 (pp.523-536) ISBN:9788885298316

• Tenacità alla Frattura di Compositi in Carbonio Pirolitico/Grafite per Applicazioni Biologiche
  Proceeding
  

  Raguso, M.; Casadei, A.; Rossetto, Massimo; Doglione, R.; Firrao, D.
  In: IGF 14
  IGF 14 (Trento) Maggio
  (pp.241-249) ISBN:9788895940113

• Fracture toughness of pyrolitic carbon-graphite composites for biological applications
  Proceeding
  

  Raguso, M.; Casadei, A.; Rossetto, Massimo; Doglione, R.; Firrao, Donato
  In: ECF12 Fracture from defects
  ECF12 Fracture from defects (Sheffield (UK)) September
  Vol.III (pp.1387-1392)

• Artificial Neural Networks for Motion Emulation in Virtual Environments
  Proceeding
  

  Y., Bellan; M., Costa; G., Ferrigno; Lombardi, Franco; L., Macchiarulo; A., Montuori; Pasero, Eros Gian Alessandro; C., Rigotti
  In: Titolo volume non avvalorato
  Springer
  Modelling and Motion Capture Techniques for Virtual Environments International Workshop, CAPTECH’98 (Geneva (CHE)) November 26–27, 1998
  Vol.1537 pp.17 (pp.83-99) ISBN:9783540493846 DOI:10.1007/3-540-49384-0_7

• A Data Driven Methodology for the Simulation of Human Movement in CAD Environments
  Proceeding
  

  Costa, M.; Lombardi, Franco; Montuori, A.
  In: Titolo volume non avvalorato
  ICME 98
  

• Validazione sperimentale di un modello per prove di impatto Charpy
  Proceeding
  

  Goglio, Luca; Rossetto, Massimo
  In: Atti del XXVII Convegno Nazionale AIAS
  XXVII Convegno Nazionale AIAS (Perugia (I)) 8-12 settembre 1998
  pp.10 (pp.749-758)

• Influence of post sintering treatments on the mechanical properties of sintered materials
  Proceeding
  

  Rossetto, Massimo; Rosso, Mario; Goglio, Luca
  In: Titolo volume non avvalorato
  15th Symposium Danubia-Adria
  (pp.167-168)

• On data interpretation of polymers resilience test
  Proceeding
  

  Goglio, Luca; Rossetto, Massimo
  In: Proceedings of the 11th International Conference on Experimental Mechanics
  Balkema (PAESI BASSI)
  11th ICEM (Oxford (UK)) August
  (pp.905-910) ISBN:9789058090164

• COMPARATIVE ANALYSIS OF THE STRUCTURE AND PROPERTIES PF Al/SiC(p) COMPOSITE MATERIALS AS A FUNCTION OF PM PROCESSING ROUTE
  Proceeding
  

  Gingu, O; Rosso, M; Ubertalli, Graziano
  In: Proc. of 1998 powder metallurgy world congress and exhibition
  EPMA
  1998 PM WORLD CONGRESS (GRANADA - SPAIN) 18-22 OCTOBER 1998
  Vol.1 (pp.162-167) ISBN:9781899072095

• PROPERTIES OF NITROCARBURIZED PM IRON AND STEELS MODIFIED BY BORON
  Proceeding
  

  Rosso, M; KARWAN BACZEWSKA, J; Ubertalli, Graziano
  In: Proc. of 1998 powder metallurgy world congress and exhibition, Granada, 1998
  EPMA
  1998 PM WORLD CONGRESS (GRANADA - SPAIN) OCTOBER 18-22
  (pp.480-488) ISBN:9781899072095

• Comportamento dinamico di palette di turbina soggette a forzamento e attrito
  Proceeding
  

  Berruti, TERESA MARIA; Filippi, S.; Goglio, Luca; Gola, Muzio
  In: Titolo volume non avvalorato
  XXVII Convegno Nazionale AIAS, Catania
  (pp.269-278)

• Glass-ceramic Joining and Coating of SiC/SiC for Fusion Applications
  Article
  

  Ferraris, Monica; Salvo, Milena; Isola, C.; Appendino, Margherita; Kohyama, A.
  JOURNAL OF NUCLEAR MATERIALS
  Vol.258-263 pp.5 (pp.1546-1550) ISSN:0022-3115 DOI:10.1016/S0022-3115(98)00176-7

• Joining of surface modified Carbon/Carbon composites using a barium-aluminum-boro-silicate glass
  Article
  

  Isola, C.; Salvo, Milena; Ferraris, Monica; Appendino, Margherita
  JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
  Vol.18 pp.8 (pp.1017-1024) ISSN:0955-2219 DOI:10.1016/S0955-2219(97)00203-3

• Protective Glass Coating for Carbon-Carbon Composites
  Article
  

  Appendino, Pietro; Bosco, F.; Ferraris, Monica; Salvo, Milena
  CARBON
  Vol.36 pp.6 (pp.1213-1218) ISSN:0008-6223 DOI:10.1016/S0008-6223(98)00100-6

• Benefits of Geometric Dimensioning and Tolerancing
  Article
  

  Chiabert, Paolo; Lombardi, Franco; Orlando, M.
  JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
  Vol.No 78 (pp.29-35) ISSN:0924-0136

• Tensioni residue da lavorazione meccanica in leghe di alluminio
  Proceeding
  

  Berruti, TERESA MARIA; Ubertalli, Graziano
  In: Titolo volume non avvalorato
  XXVI Convegno Nazionale AIAS
  

• Controllo non distrutivo con ultrasuoni
  Book chapter
  

  Goglio, Luca
  Metodi sperimentali per la progettazione
  Levrotto & Bella (ITALIA)
  (pp.283-318) ISBN:9788882120986

• Introduzione alle prove non distruttive
  Book chapter
  

  Goglio, Luca
  Metodi sperimentali per la progettazione
  Levrotto & Bella (ITALIA)
  (pp.257-279) ISBN:9788882120986

• Estensimetria elettrica a resistenza
  Book chapter
  

  Goglio, Luca
  Metodi sperimentali per la progettazione
  Levrotto & Bella (ITALIA)
  (pp.59-101) ISBN:9788882120986

• Static lateral compression of aluminium tubes: strain gauge measurements and discussion of theoretical models
  Article
  

  Avalle, Massimiliano; Goglio, Luca
  JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN
  Vol.32 (pp.335-343) ISSN:0309-3247 DOI:10.1243/0309324971513454

• Curve R di acciai sinterizzati
  Proceeding
  

  Doglione, R.; Ubertalli, Graziano
  In: Atti "XIII Convegno Nazionale del Gruppo Italiano Frattura
  XIII Convegno Nazionale del Gruppo Italiano Frattura (Cassino) 27-28 maggio 1997
  Vol.1 (pp.127-136)

• TESIONI RESIDUE DA LAVORAZIONE MECCANICA IN LEGHE DI ALLUMINIO.
  Proceeding
  

  Berruti, TERESA MARIA; Ubertalli, Graziano
  In: ATTI 26° CONVEGNO NAZIONALE AIAS
  26° CONVEGNO NAZIONALE AIAS (CATANIA - SICILIA) 1997
  (pp.187-194)

• Indurimento superficiale di acciai legati con Ni, Mo e Mn, sinterizzati e sottoposti a differenti processi di cementazione
  Proceeding
  

  Rosso, M.; Scavino, Giorgio; Ubertalli, Graziano
  In: Atti 16° Conv. Naz. Tratt. Term.
  AIM (ITALIA)
  16° Conv. Naz. Tratt. Term., (Salsomaggiore) 1997
  (pp.215-226)

• Self-sealing multilayer coating for SiC/SiC composites
  Proceeding
  

  Ferraris, Monica; Montorsi, M.; Salvo, Milena; Isola, C.; Kohyama, A.
  In: Titolo volume non avvalorato
  IEA/JUPITER Joint Int. Workshop on SiC/SiC Composites for Fusion Structural Applications (Sendai (JPN)) 23-24 Oct. 1997
  pp.1

• Joining of carbon/carbon composites for thermonuclear fusion applications
  Article
  

  Salvo, Milena; Lemoine, P.; Ferraris, Monica; Montorsi, M.
  JOURNAL OF THE AMERICAN CERAMIC SOCIETY
  Vol.80 [1] pp.7 (pp.206-212) ISSN:0002-7820 DOI:10.1111/j.1151-2916.1997.tb02811.x

• CONSTRUCTION AND SIMULATION IN A...STRUCTURE OF A CNC 5 AXIS MILLING MACHINE
  Article
  

  Chiabert, Paolo; Lombardi, Franco; Orlando, M.
  JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
  Vol.1 (pp.655-664) ISSN:0924-0136